DIN 4108-4:2016-07 (Draft)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES
Available format(s)
Hardcopy , PDF
Superseded date
03-07-2021
Language(s)
German
Published date
01-01-2016
| DevelopmentNote |
Supersedes DIN 4108. (01/2005) Supersedes DIN V 4108-4. (02/2013)
|
| DocumentType |
Draft
|
| Pages |
44
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| DIN 1306:1984-06 | DENSITY - CONCEPTS, PRESENTATION OF VALUES |
| DIN HDBK 158/1 : 10ED 2014 | |
| DIN 18164-1:1992-08 | RIGID CELLULAR PLASTICS INSULATING BUILDING MATERIALS - THERMAL INSULATING MATERIALS |
| DIN 52619-3:1985-02 | TESTING OF THERMAL INSULATION; DETERMINATION OF THE THERMAL RESISTANCE AND THE THERMAL TRANSMISSION COEFFICIENT OF WINDOWS; DETERMINATION ON FRAMES |
| DIN 4701-2:1983-03 | RULES FOR CALCULATING THE HEAT REQUIREMENT OF BUILDINGS; TABLES, PICTURES, ALGORITHMS |
| DIN 18160-1:2001-12 | CHIMNEYS - PART 1: DESIGN AND PERFORMANCE |
| DIN 1053-1:1996-11 | MASONRY - PART 1: DESIGN AND CONSTRUCTION |
| DIN 4108-3:1981-08 | HEAT INSULATION IN BUILDINGS - PROTECTION AGAINST MOISTURE CAUSED BY THE CLIMATE - REQUIREMENTS AND DIRECTIONS FOR PLANNING AND CONSTRUCTION |
| DIN 4108-2:1981-08 | HEAT INSULATION IN BUILDINGS - HEAT INSULATION AND HEAT STORAGE - REQUIREMENTS AND DIRECTIONS FOR PLANNING AND CONSTRUCTION |
| DIN 4108-4:1991-11 | THERMAL INSULATION IN BUILDINGS; CHARACTERISTIC VALUES RELATING TO THERMAL INSULATION AND PROTECTION AGAINST MOISTURE |
| DIN 4108-5:1981-08 | HEAT INSULATION IN BUILDINGS; CALCULATION METHODS |
| VDI 6030 Blatt 1:2002-07 | Designing free heating surfaces - Fundamentals - Designing of heating appliances |
| VDI 2050 Blatt 1.1:2017-07 | Requirements for technical equipment rooms - Space for service shafts |
| DIN 52611-1:1991-01 | TESTING OF THERMAL INSULATION; DETERMINATION OF THERMAL RESISTANCE OF STRUCTURAL COMPONENTS; LABORATORY TESTING |
| DIN 52612-2:1984-06 | TESTING OF THERMAL INSULATING MATERIALS; DETERMINATION OF THERMAL CONDUCTIVITY BY MEANS OF THE GUARDED HOT PLATE APPARATUS; CONVERSION OF THE MEASURED VALUES FOR BUILDING APPLICATIONS |
| DIN 4140:2014-04 | Insulation work on industrial installations and building equipment - Execution of thermal and cold insulations |
| DIN 4108-3:2014-11 | THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 3: PROTECTION AGAINST MOISTURE SUBJECT TO CLIMATE CONDITIONS - REQUIREMENTS AND DIRECTIONS FOR DESIGN AND CONSTRUCTION |
| DIN 52619-2:1985-02 | TESTING OF THERMAL INSULATION; DETERMINATION OF THE THERMAL RESISTANCE AND THE THERMAL TRANSMISSION COEFFICIENT OF WINDOWS; DETERMINATION AN THE GLAZING |
| DIN 4701-1:1983-03 | RULES FOR CALCULATING THE HEAT REQUIREMENT OF BUILDINGS; BASIC RULES FOR CALCULATION |
| DIN 17615-1:1987-01 | ALMGSIO,5 PRECISION PROFILES - TECHNICAL DELIVERY CONDITIONS |
| DIN 18807-3:1987-06 | TRAPEZOIDAL SHEETING IN BUILDING - STEEL TRAPEZOIDAL SHEETING - STRENGTH ANALYSIS, STRUCTURAL DESIGN |
| DIN HDBK 90 : 9ED 2013 | DAEMM- UND BRANDSCHUTZARBEITEN AN TECHNISCHEN ANLAGEN VOB/STLB-BAU - VOB TEIL B: DIN 1961; VOB TEIL C: ATV DIN 18299, ATV DIN 18421 |
| DIN 4109-34:2016-07 | SOUND INSULATION IN BUILDINGS - PART 34: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - ADDITIONAL LAYERS FIXED TO SOLID STRUCTURAL ELEMENTS |
| DIN EN 13169:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| DIN EN 1996-2:2010-12 | Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry (includes Corrigendum AC:2009) |
| DIN EN 13170:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| DIN EN 10255:2015-05 (Draft) | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| DIN V 18151-100:2005-10 | LIGHTWEIGHT CONCRETE HOLLOW BLOCKS - PART 100: HOLLOW BLOCKS WITH SPECIFIC PROPERTIES |
| DIN V 18599-4:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 4: NET AND FINAL ENERGY DEMAND FOR LIGHTING |
| DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| DIN EN 771-3:2015-11 | SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES) |
| DIN EN 15599-1:2010-12 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| DIN V 20000-403:2005-06 | APPLICATION OF BUILDING PRODUCTS IN STRUCTURES - PART 403: RULES FOR THE APPLICATION OF AGGREGATE CONCRETE MASONRY UNITS ACCORDING TO DIN EN 771-3:2005-05 |
| DIN EN 771-2:2015-11 | Specification for masonry units - Part 2: Calcium silicate masonry units (includes Amendment A1:2015) |
| DIN EN 13162:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 14308:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| DIN EN 15037-2:2011-07 | Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks (includes Amendment A1:2011) |
| DIN EN 12620:2015-07 (Draft) | AGGREGATES FOR CONCRETE |
| DIN 18180:2014-09 | GYPSUM PLASTERBOARDS - TYPES AND REQUIREMENTS |
| DIN EN 13950:2014-09 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN 4108-10:2015-12 | Thermal insulation and energy economy in buildings - Part 10: Application-related requirements for thermal insulation materials - Factory made products |
| DIN EN 14304:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| DIN 52129:2014-11 | UNCOATED BITUMEN SATURATED SHEETING - DEFINITION, DESIGNATION, REQUIREMENTS |
| DIN EN ISO 7345:1996-01 | THERMAL INSULATION - PHYSICAL QUANTITIES AND DEFINITIONS |
| DIN EN 1745:2012-07 | MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES |
| DIN EN ISO 12572:2015-01 (Draft) | HYGROTHERMAL PERFORMANCE OF BUILDING MATERIALS AND PRODUCTS - DETERMINATION OF WATER VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 12572:2016) |
| DIN EN ISO 10211:2015-06 (Draft) | THERMAL BRIDGES IN BUILDING CONSTRUCTION - HEAT FLOWS AND SURFACE TEMPERATURES - DETAILED CALCULATIONS (ISO 10211:2017) |
| DIN V 106:2005-10 | CALCIUM SILICATE UNITS WITH SPECIFIC PROPERTIES |
| DIN 20000-129:2014-10 | APPLICATION OF BUILDING PRODUCTS IN STRUCTURES - PART 129: RULES FOR THE APPLICATION OF CLAY BLOCKS ACCORDING TO DIN EN 15037-3:2011-07 |
| DIN EN 12433-1:2000-02 | Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors; Trilingual version EN 12433-1:1999 |
| DIN EN 998-1:2015-11 (Draft) | SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
| DIN 20000-402:2016-03 | APPLICATION OF BUILDING PRODUCTS IN STRUCTURES - PART 402: RULES FOR THE APPLICATION OF CALCIUM SILICATE MASONRY UNITS ACCORDING TO DIN EN 771-2:2015-11 |
| DIN 20000-401:2016-07 (Draft) | APPLICATION OF BUILDING PRODUCTS IN STRUCTURES - PART 401: RULES FOR THE APPLICATION OF CLAY MASONRY UNITS ACCORDING TO DIN EN 771-1:2015-11 |
| DIN 18162:2000-10 | Lightweight concrete wallboards - unreinforced |
| DIN 18148:2000-10 | LIGHT WEIGHT CONCRETE HOLLOW-BOARDS |
| DIN EN 14307:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| DIN EN 14314:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DIN EN 12664:2001-05 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance; English version of DIN EN 12664 |
| DIN V 18153-100:2005-10 | CONCRETE MASONRY UNITS (NORMAL-WEIGHT CONCRETE) - PART 100: MASONRY UNITS WITH SPECIFIC PROPERTIES |
| DIN 105-100:2012-01 | CLAY MASONRY UNITS - PART 100: CLAY MASONRY UNITS WITH SPECIFIC PROPERTIES |
| DIN EN ISO 6946:2015-06 (Draft) | BUILDING COMPONENTS AND BUILDING ELEMENTS - THERMAL RESISTANCE AND THERMAL TRANSMITTANCE - CALCULATION METHODS (ISO 6946:2017) |
| DIN EN 16069:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| DIN EN 14305:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| DIN EN 771-4:2015-11 | SPECIFICATION FOR MASONRY UNITS - PART 4: AUTOCLAVED AERATED CONCRETE MASONRY UNITS |
| DIN EN 13241-1:2011-06 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
| DIN EN 13164:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| DIN EN 15037-3:2011-07 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011) |
| DIN V 18152-100:2005-10 | LIGHTWEIGHT CONCRETE SOLID BRICKS AND BLOCKS - PART 100: SOLID BRICKS AND BLOCKS WITH SPECIFIC PROPERTIES |
| DIN EN 14309:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| DIN EN 13166:2016-09 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DIN EN 14963:2006-12 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| DIN EN 14351-1:2010-08 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS |
| DIN EN ISO 10456:2010-05 | Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007 + Cor. 1:2009); German version EN ISO 10456:2007 + AC:2009 |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| DIN EN ISO 13370:2015-06 (Draft) | THERMAL PERFORMANCE OF BUILDINGS - HEAT TRANSFER VIA THE GROUND - CALCULATION METHODS (ISO 13370:2017) |
| DIN EN 14303:2016-08 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 14318-1:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| DIN EN 520:2009-12 | Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009) |
| DIN 1045-2:2008-08 | Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, performance, production and conformity - Application rules for DIN EN 206-1 |
| DIN EN 13167:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| DIN 105-5:2013-06 | CLAY MASONRY UNITS - PART 5: LIGHTWEIGHT HORIZONTALLY PERFORATED CLAY MASONRY UNITS AND LIGHTWEIGHT HORIZONTALLY PERFORATED DAY MASONRY PANELS |
| DIN EN 13165:2016-09 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| DIN EN 14315-1:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| DIN EN 772-13:2000-09 | Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone); English version of DIN EN 772-13 |
| DIN EN 771-1:2015-11 | Specification for masonry units - Part 1: Clay masonry units; German version EN 771-1:2011+A1:2015 |
| DIN EN 13171:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| DIN 105-6:2013-06 | CLAY MASONRY UNITS - PART 6: HIGH PRECISION UNITS |
| DIN EN 14313:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| DIN 4159:2014-05 | FLOOR BRICKS AND PLASTERBOARDS, STATICALLY ACTIVE |
| DIN EN 14063-1:2016-10 (Draft) | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016 |
| DIN EN 1279-5:2015-08 (Draft) | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| DIN EN 12859:2011-05 | Gypsum blocks - Definitions, requirements and test methods |
| DIN EN 14064-1:2010-06 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| DIN EN ISO 9346:2008-02 | HYGROTHERMAL PERFORMANCE OF BUILDINGS AND BUILDING MATERIALS - PHYSICAL QUANTITIES FOR MASS TRANSFER - VOCABULARY |
| DIN EN 13168:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| DIN EN ISO 10077-1:2016-10 (Draft) | THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 1: GENERAL (ISO 10077-1:2017) |
| DIN EN 1992-1-1:2011-01 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| DIN EN 12207:2015-01 (Draft) | WINDOWS AND DOORS - AIR PERMEABILITY - CLASSIFICATION |
| DIN EN 15600-1:2010-12 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| DIN EN 14319-1:2013-04 | Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation |
| DIN EN 410:2011-04 | Glass in building - Determination of luminous and solar characteristics of glazing |
| DIN EN 14306:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
| DIN 20000-404:2015-12 | APPLICATION OF BUILDING PRODUCTS IN STRUCTURES - PART 404: RULES FOR THE APPLICATION OF AUTOCLAVED AERATED CONCRETE MASONRY UNITS ACCORDING TO DIN EN 771-4:2015-11 |
| DIN EN 13163:2016-08 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| DIN 4108-3:2014-11 | THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 3: PROTECTION AGAINST MOISTURE SUBJECT TO CLIMATE CONDITIONS - REQUIREMENTS AND DIRECTIONS FOR DESIGN AND CONSTRUCTION |
| DIN EN 13707:2013-12 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| DIN EN ISO 9229:2007-11 | THERMAL INSULATION - VOCABULARY |
| DIN EN 12086:2013-06 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
US$126.43
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.