ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - PART 1: SAFETY REQUIREMENTS AND INSPECTION

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2012

Publisher

German Institute for Standardisation (Deutsches Institut für Normung)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Design requirements
6 Safeguarding hazardous areas
7 Electrical equipment and control systems
8 Information for use
9 Testing prior to commissioning
Annex A (normative) - Checklist for visual and
        functional checks
Annex B (normative) - Examples of hazards, hazardous
        situations and hazardous events associated with
        machinery installations as in this standard
Annex C (normative) - Designing safeguards on the
        basis of risk assessment
Annex D (informative) - Examples of using the risk graphs
Bibliography

Applicable to machinery and machinery installations used in places of assembly and in staging and production facilities for events and theatrical productions (stage machinery, for short).

DevelopmentNote	Supersedes DIN 56950 E. (08/2013)
DocumentType	Standard
Pages	76
PublisherName	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Current
SupersededBy	DIN EN 17206:2020-09
Supersedes	DIN 56950:2005-04

CEN Guide 414:2017	Safety of machinery - Rules for the drafting and presentation of safety standards
VDE 0113-11 : 2001 COR 1 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C AND NOT EXCEEDING 36 KV
DIN EN 60947-4-1 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009 + A1:2012)
DIN VDE 0100-534 : 2016-10	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST TRANSIENT OVERVOLTAGES (IEC 60364-5-53:2001/A2:2015, MODIFIED)
DIN 685-5:1981-11	ROUND STEEL LINK CHAINS; UTILIZATION
DIN 15061-1:1977-08	LIFTING APPLIANCES; GROOVE PROFILES FOR WIRE ROPE SHEAVES
DIN EN 50310 : 2017	TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
VDE 0113-50 : 2016-5	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005 + A1:2012 + A2:2015)
VDE 0660-600-1 : 2012-06	NIEDERSPANNUNGS-SCHALTGERAETEKOMBINATIONEN - TEIL 1: ALLGEMEINE FESTLEGUNGEN (IEC 61439-1:2011)
VDE 0845-4-2 : 2002	LIGHTNING PROTECTION - TELECOMMUNICATION LINES - LINES USING METALLIC CONDUCTORS
DIN EN 60034-1 : 2011	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
VDE 0100-718 : 2014	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-718: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - COMMUNAL FACILITIES AND WORKPLACES
DIN EN 81346-1:2010-05	INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 1: BASIC RULES
VDE 0660-102 : 2014	NIEDERSPANNUNGSSCHALTGERAETE - TEIL 4-1: SCHUETZE UND MOTORSTARTER - ELEKTROMECHANISCHE SCHUETZE UND MOTORSTARTER (IEC 60947-4-1:2009 + A1:2012)
DIN VDE 0100-706:2007-10	LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-706: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CONDUCTING LOCATIONS WITH RESTRICTED MOVEMENT
VDE 0039 : 2001	PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION
BGG 912 : 2009	PRUEFUNG MASCHINENTECHNISCHER EINRICHTUNGEN IN BUEHNEN UND STUDIOS
DIN EN 13411-6 E : 2009	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
DIN EN 60204-1 : 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
VDE 0839-6-2 : 2006 COR 1 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - GENERIC STANDARDS; IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
DIN EN 13411-5 E : 2009	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
DIN EN 13411-2 E : 2009	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS
DIN EN 62079 : 2001	PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION
VDE 0100-534 : 2016-10	Low-voltage electrical installations Part 5-53: Selection and erection of electrical equipment – Isolation, switching and control – Clause 534: Devices for protection against transient overvoltages<br>
VDE 0411-500 : 2008 COR 1 2009	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
BGI 575 : 2003	AUSWAHL UND ANBRINGUNG ELEKTROMECHANISCHER VERRIEGELUNGSEINRICHTUNGEN FUER SICHERHEITSFUNKTIONEN
DIN EN 61439-1 : 2012-06	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
VDE 0108-100 : 2005-01	EMERGENCY ESCAPE LIGHTING SYSTEMS
DIN EN 50172 : 2005-01	EMERGENCY ESCAPE LIGHTING SYSTEMS
DIN VDE 0100-718 : 2014	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-718: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - COMMUNAL FACILITIES AND WORKPLACES
DIN 43148:1986-11	WEDGE CLAMPS FOR OVERHEAD EQUIPMENT
DIN EN 50122-1 : 2017	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK
DIN EN 61663-2 : 2002	LIGHTNING PROTECTION - TELECOMMUNICATION LINES - PART 2: LINES USING METALLIC CONDUCTORS
VDE 0100-706:2007-10	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-706: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CONDUCTING LOCATIONS WITH RESTRICTED MOVEMENT
DIN 31000;VDE 1000:1979-03	GENERAL PRINCIPLES FOR THE SAFETY DESIGN OF TECHNICAL PRODUCTS
DIN EN 13411-3 E : 2011	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING
DIN 56921-1:2010-03	Entertainment technology - Flying systems - Part 1: Manual counterweight flying systems for total loading up to 500 kg
DIN 56920-3:1970-07	ENTERTAINMENT TECHNOLOGY - TERMS FOR STAGE EQUIPMENT
VDE 0839-6-4 : 2011	ELEKTROMAGNETISCHE VERTRAEGLICHKEIT (EMV) - TEIL 6-4: FACHGRUNDNORMEN - STOERAUSSENDUNG FUER INDUSTRIEBEREICHE
VDE 0115-3 : 2017	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK
DIN EN 13411-7 E : 2009	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
DIN EN 60204-11 : 2001 COR 1 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C AND NOT EXCEEDING 36 KV
DIN 3089-2:1984-04	STEEL WIRE ROPES - SPLICES - LONG SPLICE
VDE 0845-4-1 : 2000	LIGHTING PROTECTION - TELECOMMUNICATION LINES - FIBRE OPTIC INSTALLATIONS A FIBRES OPTIQUES
DIN EN 60529 : 2014-09	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529:1989 + A1:1999 + A2:2013)
VDE 0113-1 : 2007 COR 1 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
DIN EN 62061 : 2016	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005 + A1:2012 + A2:2015)
DIN EN 61000-6-4 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
DIN 15061-2:1977-08	CRANES; GROOVE PROFILES FOR WIRE ROPE DRUMS
VDE 0530-1 : 2011	Rotating electrical machines Part 1: Rating and performance (IEC 60034-1:2010, modified);
VDE 0800-2-310 : 2017	TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
ISO 4301-1:2016	Cranes — Classification — Part 1: General
DIN EN 61095 : 2009	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
VDE 0113-32 : 2009-03	SAFETY OF MACHINERY ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
DIN EN 61131-1:2004-03	PROGRAMMABLE CONTROLLERS - PART 1: GENERAL INFORMATION
BGV C 1 : 1998	VERANSTALTUNGS- UND PRODUKTIONSSTAETTEN FUER SZENISCHE DARSTELLUNG
VDE 0637-3 : 2009	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
VDE 0100-540 : 2012-06	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS (IEC 60364-5-54:2011)
DIN EN 61131-2 : 2008 COR 1 2009	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
DIN EN 60204-32 : 2009-03	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
DIN 15020-1 E : 1974	LIFTING APPLIANCES; PRINCIPLES RELATING TO ROPE DRIVES; CALCULATION AND CONSTRUCTION
VDE 1000:2017-04	GENERAL PRINCIPLES FOR THE SAFE DESIGN OF PRODUCTS
DIN EN 61663-1 : 2000	LIGHTNING PROTECTION - TELECOMMUNICATION LINES - PART 1: FIBRE OPTIC INSTALLATIONS