• There are no items in your cart

DIN EN 10025-1:2011-04 (Draft)

Current
Current

The latest, up-to-date edition.

Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011
Available format(s)

Hardcopy , PDF

Language(s)

German

Published date

04-01-2011

DevelopmentNote
Supersedes DIN EN 10113-1, DIN EN 10137-1, DIN EN 10025 and DIN EN 10155 (02/2005) DRAFT 2011 issued in April 2011. (05/2011)
DocumentType
Draft
Pages
35
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current
Supersedes

DIN 18360:2016-09 GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - METALWORK
DIN 18316:2016-09 GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - ROAD CONSTRUCTION - SURFACINGS WITH HYDRAULIC BINDERS
DIN 19704-2:2014-11 HYDRAULIC STEEL STRUCTURES - PART 2: DESIGN AND MANUFACTURING
EN 50341-2-4:2016 Overhead electrical lines exceeding AC 1 kV - Part 2-4: National Normative Aspects (NNA) for Germany (based on EN 50341-1:2012)
DIN EN ISO 16433:2007-09 Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006)
VDI 3388:2012-03 Materials for trimming and forming dies
DIN 55634:2016-10 (Draft) PAINTS, VARNISHES AND COATINGS - CORROSION PROTECTION OF SUPPORTING THIN-WALLED BUILDING COMPONENTS MADE OF STEEL
VDI 3576:2011-03 Rails for crane systems - Rail connections, rail beddings, rail fastenings, tolerances for crane tracks
BS EN 50341-2-4:2016 Overhead electrical lines exceeding AC 1 kV National Normative Aspects (NNA) for Germany (based on EN 50341-1:2012)
ASTM D 7420 : 2018 : REDLINE Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
DIN 18516-1:2010-06 Cladding for external walls, ventilated at rear - Part 1: Requirements, principles of testing
DIN 3859-1:2005-09 Compression couplings - Part 1: Technical delivery conditions
DIN EN ISO 16432:2007-09 Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006)
DIN HDBK 70 : 9ED 2013 PUTZ- UND STUCKARBEITEN VOB/STLB - VOB TEIL B: DIN 1961, VOB TEIL C: ATV DIN 18299, ATV DIN 18350
I.S. EN 50341-2-4:2016 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-4: NATIONAL NORMATIVE ASPECTS (NNA) FOR GERMANY (BASED ON EN 50341-1:2012)
DIN 83202-3:2015-06 LADDERS ON SHIPS - PART 3: HEAVY TYPE
DIN 30690-1:2016-04 CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS
DIN 4124:2012-01 EXCAVATIONS AND TRENCHES - SLOPES, PLANKING AND STRUTTING BREADTHS OF WORKING SPACES
DIN 86111:2016-08 WELD-IN DECK SCREW CAPS FOR FILLING AND SOUNDING PIPES
DIN 81249-2:2013-05 CORROSION OF METALS IN SEA WATER AND SEA ATMOSPHERE - PART 2: FREE CORROSION IN SEA WATER
DIN 18360:2019-09 GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - METALWORK
DIN 21530-3:2016-09 MINE SUPPORT - PART 3: REQUIREMENTS

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
CR 10261 : 1995 ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS
EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10079:2007 Definition of steel products
EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10268:2006+A1:2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10056-2:1993 Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
EN 10279:2000 Hot rolled steel channels - Tolerances on shape, dimensions and mass
EN 10149-2:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
EN 10034:1993 Structural steel I and H sections - Tolerances on shape and dimensions
EN 10248-1:1995 Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 10277-2:2008 Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
ISO 17642-3:2005 Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 3: Externally loaded tests
EN 10024:1995 Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 1011-2:2001/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
EN 10306:2001 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
EN 10163-1:2004/AC:2007 DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
PREN 10293 : DRAFT 2012 STEEL CASTING AND FORGINGS - STEEL CASTINGS FOR GENERAL ENGINEERING USES
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 10021:2006 General technical delivery conditions for steel products
EN 10017:2004 Steel rod for drawing and/or cold rolling - Dimensions and tolerances
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10250-2:1999 Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
EN 10025-5:2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN ISO 17642-1:2004 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004)
EN 10163-3:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
EN 10204:2004 Metallic products - Types of inspection documents
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
ISO 9001:2015 Quality management systems — Requirements
ISO 643:2012 Steels Micrographic determination of the apparent grain size
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10025-6:2004+A1:2009 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
ISO 17642-1:2004 Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 1: General
EN 10225:2009 Weldable structural steels for fixed offshore structures - Technical delivery conditions
EN ISO 17642-3:2005 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005)
EN 10020:2000 Definition and classification of grades of steel
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
DIN V 17006-100:1999-04 DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS
EN ISO 17642-2:2005 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005)
EN 10055:1995 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN 10249-1:1995 Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
EN 10067:1996 Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10149-3:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels
ISO 17642-2:2005 Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 2: Self-restraint tests
CR 10260 : 1998 DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS

View more information
US$108.91
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.