DIN EN 10208-1:2009-07
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
03-01-2013
English
01-01-2009
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole und Abkürzungen
5 Einteilung und Bezeichnung
5.1 Einteilung
5.2 Bezeichnung
6 Bestellangaben
6.1 Verbindliche Angaben
6.2 Optionen
6.3 Bestellbeispiel
7 Herstellung
7.1 Allgemeines
7.2 Stahlherstellung
7.3 Rohrherstellung
7.4 Wärmebehandlungstand
7.5 Massumformung
7.6 Bandverbindungsnähte
7.7 Rundnahtrohre
7.8 Allgemeine Anforderungen an die
zerstörungsfreie Prüfung
8 Anforderungen
8.1 Allgemeines
8.2 Chemische Zusammensetzung
8.3 Mechanische Eigenschaften
8.4 Schweisseignung
8.5 Oberflächenbeschaffenheit
und innere Beschaffenheit
8.6 Masse, Masse und Grenzabweichungen
9 Prüfung
9.1 Arten der Prüfung und Prüfbescheinigungen
9.2 Übersicht über die Prüfungen
9.3 Auswahl der Probenabschnitte und Proben
9.4 Prüfverfahren
9.5 Wiederholungsprüfungen, Sortierung
und Nachbehandlung
10 Kennzeichnung der Rohre
10.1 Allgemeine Kennzeichnung
10.2 Besondere Kennzeichnung
11 Überzüge für temporären Schutz
Anhang A (normativ) Festlegungen für Rundnahtrohre
Anhang B (normativ) Behandlung von
Unregelmässigkeiten und Fehlern, die durch
Besichtigung ermittelt wurden
Anhang C (normativ) Zerstörungsfreie Prüfung
Literaturhinweise
This standard is included in DIN Handbook 403.
| DevelopmentNote |
Supersedes DIN 1629-1, DIN 1629-3, DIN 1626-1 & DIN 1626-3 (03/2003) Together with DIN EN 10296-1, DIN EN 10217-1, DIN EN 10224, DIN EN 10216-1 and DIN EN 10297-1, supersedes DIN 1626. Together with DIN EN 10216-1, DIN EN 10297-1, DIN EN 10224 and DIN EN 10217-1, supersedes DIN 1629. (02/2004)
|
| DocumentType |
Standard
|
| Pages |
47
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 10208-1 : 2009 | Identical |
| NBN EN 10208-1 : 2009 | Identical |
| NEN EN 10208-1 : 2009 | Identical |
| NS EN 10208-1 : 2009 | Identical |
| I.S. EN 10208-1:2009 | Identical |
| UNE-EN 10208-1:2011 | Identical |
| SN EN 10208-1 : 2009 | Identical |
| UNI EN 10208-1 : 2009 | Identical |
| BS EN 10208-1:2009 | Identical |
| EN 10208-1:2009 | Identical |
| DIN 2876:2002-06 | FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS GLASS LINED - TECHNICAL SPECIFICATIONS |
| DIN HDBK 403 : 4ED 2005 | IRON AND STEEL: QUALITY STANDARDS 3 - PRESSURE VESSELS AND PIPELINES - FINE GRAIN STEEL - STEEL WITH LOW TEMPERATURE TOUGHNESS - STEEL WITH ELEVATED TEMPERATURE PROPERTIES - STEEL FOR PRESSURE APPLICATIONS - CASTINGS AND FORGINGS |
| DIN EN 10297-1:2003-06 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| DIN 3859-1:2005-09 | Compression couplings - Part 1: Technical delivery conditions |
| DIN 19643-1:2012-11 | Treatment of water of swimming pools and baths - Part 1: General requirements |
| DVGW GW 320-1 : 2009 | REHABILITATION OF GAS AND WATER PIPE LINES WITH PE-HD PIPES BY LINING WITH CONTINUOUS OR DISCRETE PIPE - REQUIREMENTS, QUALITY CONTROL, TESTING |
| DIN 7331:2011-03 | Compression rivets |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10246-17:2000 | Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 10246-1:1996 | Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| EN 1594:2013 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| EN 10256:2000 | Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel |
| EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| API 5L : 2012 | LINE PIPE |
| EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| EN 1011-2:2001/A1:2003 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| EN 10246-7:2005 | Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10246-10:2000 | Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10246-9:2000 | Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN 10246-3:1999 | Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| ISO 19232-1:2013 | Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 8492:2013 | Metallic materials Tube Flattening test |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN 10246-8:1999 | Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN 10246-5 : 1999 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.