• There are no items in your cart

DIN EN 10210-1:2016-01 (Draft)

Current
Current

The latest, up-to-date edition.

HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
Available format(s)

Hardcopy , PDF

Language(s)

German

Published date

01-01-2016

Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe und Symbole
   3.1 Begriffe
   3.2 Symbole
4 Einteilung und Bezeichnung
   4.1 Einteilung
   4.2 Bezeichnung
5 Bestellangaben
   5.1 Verbindliche Angaben
   5.2 Optionen
   5.3 Bestellbeispiel
6 Anf orderungen
   6.1 Allgemeines
   6.2 Stahlherstellungsverfahren
   6.3 Herstellverfahren für die Hohlprofile
   6.4 Lieferzustand
   6.5 Chemische Zusammensetzung
   6.6 Mechanische Eigenschaften
   6.7 Technologische Eigenschaften
   6.8 Oberflächenbeschaffenheit
   6.9 Zerstörungsfreie Prüfung der Schweissnähte
   6.10 Grenzabmasse und Masse
7 Prüfung
   7.1 Arten der Prüfung
   7.2 Arten der Prüfbescheinigungen
   7.3 Zusammenfassung der Prüfungen
8 Probenahme
   8.1 Prüfumfang
   8.2 Vorbereitung der Probenabschnitte und Proben
9 Prüfverfahren
   9.1 Chemische Zusammensetzung
   9.2 Mechanische Prüfungen
   9.3 Sichtprüfung und Prüfung der Masse
   9.4 Zerstörungsfreie Prüfung
   9.5 Wiederholungsprüfungen, Sortieren und Nachbehandlung
10 Kennzeichnung
11 Konformitätsbescheinigung
Anhang A (normativ) Hohlprofile für den Stahlbau aus
          unlegierten Qualitätsstählen - Chemische
          Zusammensetzung und mechanische Eigenschaften
Anhang B (normativ) Hohlprofile für den Stahlbau aus
          Feinkornbaustählen - Chemische Zusammensetzung und
          mechanische Eigenschaften
Anhang C (normativ) Lage der Probenabschnitte und Proben
Anhang D (normativ) Konformitätsbescheinigung
Anhang ZA (informativ) Abschnitte in dieser Europäischen Norm,
          die grundlegende Anforderungen oder andere Vorgaben
          der EG-Bauproduktenrichtlinien betreffen
Literaturhinweise

This standard is included in DIN Handbook 402. Defines technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.

DevelopmentNote
Supersedes DIN 17121 (06/2003) DRAFT 2016 issued in January 2016. (01/2016)
DocumentType
Draft
Pages
44
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

Standards Relationship
EN 10210-1:2006 Identical

DIN EN 10210-2:2016-02 (Draft) HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
DIN 18800-7:2008-11 STEEL STRUCTURES - PART 7: EXECUTION AND CONSTRUCTER'S QUALIFICATION
DIN EN 10219-1:2016-01 (Draft) COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
DIN 28017-3:2012-04 STATIONARY ACCESSES TO PROCESS APPARATUS - PART 3: VERTICAL LADDERS
DIN 28017-2:2012-04 STATIONERY ACCESSES TO PROCESS APPARATUS - PART 2: RAILINGS FOR PLATFORMS
DIN 28017-4:2012-04 STATIONARY ACCESSES TO PROCESS APPARATUS - PART 4: SAFETY DEVICES AGAINST UNINTENTIONAL DESCENT

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
CR 10261 : 1995 ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
EN 10256:2000 Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel
EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
DIN EN 10025-2:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
DIN EN 10210-2:2016-02 (Draft) HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
EN 1011-2:2001/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
EN 10210-2:2006/AC:2007 HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 10021:2006 General technical delivery conditions for steel products
EN 10246-10:2000 Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10204:2004 Metallic products - Types of inspection documents
EN 10246-9:2000 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
ISO 9001:2015 Quality management systems — Requirements
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
ISO 643:2012 Steels Micrographic determination of the apparent grain size
EN 10246-3:1999 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
DIN EN 10219-1:2016-01 (Draft) COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10020:2000 Definition and classification of grades of steel
DIN EN 10025-3:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
EN 10266:2003 Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10246-8:1999 Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
EN 10246-5 : 1999 NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS

View more information
US$108.91
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.