DIN EN 13164:2015-04
Current
The latest, up-to-date edition.
Hardcopy , PDF
German, English
01-01-2015
National foreword
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units, abbreviated terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy
of Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Determination of the declared
values of thermal resistance and thermal
conductivity
Annex B (normative) - Product type determination
(PTD) and Factory production control (FPC)
Annex C (normative) - Determination of the aged values
of thermal resistance and thermal conductivity
Annex D (normative) - XPS multi-layered insulation
products
Annex E (informative) - Additional properties
Annex F (informative) - Plan for cutting test specimen
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Regulation'
Bibliography
This standard is included in DIN Handbook 90.
DevelopmentNote |
Supersedes DIN 18164-1. (04/2013)
|
DocumentType |
Standard
|
Pages |
52
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SN EN 13164 : 2012 + A1 2015 | Identical |
NF EN 13164 : 2012 + A1 2015 | Identical |
NBN EN 13164 : 2013 + A1 2015 | Identical |
BS EN 13164 : 2012 | Identical |
EN 13164:2012+A1:2015 | Identical |
NEN EN 13164 : 2012 + A1 2015 | Identical |
NS EN 13164 : 2001 | Identical |
UNI EN 13164 : 2013 | Identical |
I.S. EN 13164:2012 | Identical |
UNE-EN 13164:2013 | Identical |
DIN EN 1993-1-3/NA:2010-12 | NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
DIN V 4108-4:2007-06 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
DIN 18332:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - NATURAL STONE WORK |
VDG M 4 : 2014 | |
DIN 18516-1:2010-06 | Cladding for external walls, ventilated at rear - Part 1: Requirements, principles of testing |
DIN 18330:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - MASONRY WORK |
DIN 4108-4:2016-07 (Draft) | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
DIN 18345:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - THERMAL INSULATION COMPOSITE SYSTEMS |
DIN 4109-33:2016-07 | SOUND INSULATION IN BUILDINGS - PART 33: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - TIMBER CONSTRUCTION, LIGHTWEIGHT CONSTRUCTION AND DRY WALLING |
DIN HDBK 90 : 9ED 2013 | DAEMM- UND BRANDSCHUTZARBEITEN AN TECHNISCHEN ANLAGEN VOB/STLB-BAU - VOB TEIL B: DIN 1961; VOB TEIL C: ATV DIN 18299, ATV DIN 18421 |
DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
DIN 4108-2:2013-02 | THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 2: MINIMUM REQUIREMENTS TO THERMAL INSULATION |
ISO 9229:2007 | Thermal insulation Vocabulary |
EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
EN ISO 10456:2007/AC:2009 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
EN 1607:2013 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
EN 1606:2013 | Thermal insulating products for building applications - Determination of compressive creep |
EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
EN ISO 9229:2007 | Thermal insulation - Vocabulary (ISO 9229:2007) |
EN 1605:2013 | Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions |
EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
ISO 4590:2016 | Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells |
EN 14307:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
EN 12088:2013 | Thermal insulating products for building applications - Determination of long term water absorption by diffusion |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
EN 825:2013 | Thermal insulating products for building applications - Determination of flatness |
EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
EN 12087:2013 | Thermal insulating products for building applications - Determination of long term water absorption by immersion |
EN 13793:2003 | Thermal insulating products for building applications - Determination of behaviour under cyclic loading |
EN 12090:2013 | Thermal insulating products for building applications - Determination of shear behaviour |
ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
EN 1604:2013 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
EN 12091:2013 | Thermal insulating products for building applications - Determination of freeze-thaw resistance |
EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
ISO 11561:1999 | Ageing of thermal insulation materials Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods) |
ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
EN 14934:2007 | Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification |
EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.