• There are no items in your cart

DIN EN 1337-4 E : 2004

Current
Current

The latest, up-to-date edition.

STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
Available format(s)

Hardcopy , PDF

Published date

01-01-2004

Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
   3.1 Terms and definitions
   3.2 Symbols
   3.3 Abbreviations
4 Functional requirements
   4.1 General
   4.2 Load bearing capacity
   4.3 Rotation capability
5 Materials
   5.1 General
   5.2 Carbon steel
   5.3 Stainless steel
   5.4 Cast steel
6 Design
   6.1 General
   6.2 Movement
   6.3 Curved surfaces
   6.4 Surfaces in contact
   6.5 Length of rollers
   6.6 Guidance and security of rollers
   6.7 Dimensioning of components
        6.7.1 Dimension of roller
        6.7.2 Dimensions of roller plates
        6.7.3 Load distribution to other components
   6.8 Particular requirements
        6.8.1 Flat sided rollers
        6.8.2 Multiple rollers
        6.8.3 Corrosion in the contact line
        6.8.4 Alignment of components
        6.8.5 Alignment of bearings
   6.9 Design coefficient of friction
   6.10 Eccentricities
        6.10.1 Single rollers
        6.10.2 Eccentricity due to rotation moment of
               multiple rollers
        6.10.3 Transverse eccentricity
        6.10.4 Total eccentricity
   6.11 Combination with other elements
7 Tolerances
   7.1 Flatness
   7.2 Surface profile
   7.3 Surface roughness
   7.4 Parallelism of contact surfaces
   7.5 Diameter of multiple rollers
8 Conformity evaluation
   8.1 General
   8.2 Control of the construction product and its
        manufacture
        8.2.1 Factory Production Control (FPC)
        8.2.2 Initial type testing
        8.2.3 Routine testing
   8.3 Raw materials and constituents
9 Installation
10 In-service inspection
Annex A (normative) Ferrous materials
Annex B (informative) Factory Production Control
   B.1 General
        B.1.1 Objectives
        B.1.2 Documentation
        B.1.3 Operations
   B.2 Verifications and tests
        B.2.1 General comments
        B.2.2 Monitoring of conformity
        B.2.3 Tests
        B.2.4 Treatment of construction products which do
               not conform
        B.2.5 Recording of verification and tests
               (manufacturer's register)
        B.2.6 Traceability
Annex ZA (informative) Clauses of this European Standard
               addressing the provisions of the EU Construction
               Products Directive
  ZA.1 Scope and relevant characteristics
  ZA.2 Procedure(s) for attestation of conformity of roller bearings
        ZA.2.1 System(s) of attestation of conformity
        ZA.2.2 EC Certificate and declaration of conformity
  ZA.3 CE marking and labelling
Bibliography

Defines the requirements for the design and manufacture of single and multiple roller bearings, in which the roller axis is horizontal.

DocumentType
Standard
Pages
33
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

EN ISO 4287:1998/A1:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
EN 1337-1:2000 Structural bearings - Part 1: General design rules
EN 10025:1990/A1:1993 HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
EN 1337-2:2004 Structural bearings - Part 2: Sliding elements
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN 1337-9:1997 Structural bearings - Part 9: Protection
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9001:2015 Quality management systems — Requirements
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
EN 1337-10:2003 Structural Bearings - Part 10: Inspection and maintenance
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
EN 1337-7:2004 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
ENV 1992-1-1 : DRAFT 91 COR 1992 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
ISO 3755:1991 Cast carbon steels for general engineering purposes
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)

View more information
US$115.16
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.