• There are no items in your cart

DIN EN 13476-3:2015-11 (Draft)

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B
Available format(s)

Hardcopy , PDF

Superseded date

12-03-2020

Language(s)

German

Published date

01-01-2015

Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe, Symbole und Abkürzungen
   3.1 Begriffe
   3.2 Symbole
   3.3 Abkürzungen
4 Werkstoff
   4.1 Allgemeines
   4.2 Weichmacherfreies Polyvinylchlorid (PVC-U)
        4.2.1 Allgemeines
        4.2.2 Eigenschaften von Rohr- und
               Formstückwerkstoffen
        4.2.3 Verwendung von anderen Materialien
               als Neumaterial
   4.3 Polypropylen (PP)
        4.3.1 Allgemeines
        4.3.2 Eigenschaften von Rohr- und
               Formstückwerkstoffen
        4.3.3 Klassifizierung der
               Schmelze-Massefliessrate
        4.3.4 Verwendung von anderen Materialien
               als Neumaterial
   4.4 Polyethylen (PE)
        4.4.1 Allgemeines
        4.4.2 Werkstoff-Eigenschaften von Rohren
               und spritzgegossenen Formstücken
        4.4.3 Werkstoff-Eigenschaften von
               rotationsgegossenen Formstücken
        4.4.4 Verwendung von anderen Materialien
               als Neumaterial
        4.4.5 Befestigungselemente für Dichtringe
   4.5 Dichtringe
   4.6 Heizelement-Stumpf-, Extrusions- oder
        Heizwendelschweissverbindungen
   4.7 Klebstoffe für PVC-U
5 Bezeichnung von Wandaufbauten und Beispiele
   für Verbindungsverfahren
   5.1 Wandaufbauten von Rohren Typ B
        5.1.1 Gerippte oder gewellte Wandaufbauten
        5.1.2 Übliche Verbindungsarten für
               profilierte Wandaufbauten von Rohren Typ B
   5.2 Bezeichnung und Ausführung von Verbindungen
6 Beschaffenheit und Farbe
7 Geometrische Eigenschaften
   7.1 Allgemeines
   7.2 Masse
        7.2.1 Bezeichnung
        7.2.2 Baulänge der Rohre
        7.2.3 Durchmesser
        7.2.4 Durchmesser und Anschlussmasse von
               Muffen und Einsteckenden
        7.2.5 Wanddicken
   7.3 Formstückarten
   7.4 Konstruktionslänge von Formstücken
8 Physikalische Eigenschaften
   8.1 Weichmacherfreies Polyvinylchlorid (PVC-U)
        8.1.1 Physikalische Eigenschaften von Rohren
               aus PVC-U
        8.1.2 Physikalische Eigenschaften von
               Formstücken aus PVC-U
   8.2 Polypropylen (PP)
        8.2.1 Physikalische Eigenschaften von Rohren
               aus PP
        8.2.2 Physikalische Eigenschaften von
               Formstücken aus PP
   8.3 Polyethylen (PE)
        8.3.1 Physikalische Eigenschaften von Rohren
               aus PE
        8.3.2 Physikalische Eigenschaften von
               Formstücken aus PE
9 Mechanische Eigenschaften
   9.1 Mechanische Eigenschaften von Rohren
        9.1.1 Allgemeine Anforderungen
        9.1.2 Ringflexibilität
        9.1.3 Zugfestigkeit
   9.2 Mechanische Eigenschaften von Formstücken
10 Anforderungen an die Gebrauchstauglichkeit
11 Kennzeichnung
   11.1 Allgemeines
   11.2 Mindest-Kennzeichnung
        11.2.1 Rohre
        11.2.2 Formstücke
   11.3 Zusätzliche Kennzeichnung
        11.3.1 Allgemeines
        11.3.2 Zertifizierung von Rohren und
               Formstücken durch Drittstellen
Anhang A (normativ) - Einsatz von PVC-U-Neumaterial
Anhang B (normativ) - Verwendung von anderen
         Materialien als PVC-U-Neumaterial
       B.1 Umlaufmaterial, Rücklaufmaterial
           und Rezyklat von Rohren und Formstücken
       B.2 Rücklaufmaterial und Rezyklat mit
           vereinbarten Spezifikationen
           B.2.1 Material von Rohren und Formstücken
                 aus PVC-U
           B.2.2 Material von anderen PVC-U-Erzeugnissen
                 als Rohren und Formstücken
       B.3 Rücklaufmaterial und Rezyklat ohne
           eine vereinbarte Spezifikation
           B.3.1 Material von Rohren und Formstücken
                 aus PVC-U
           B.3.2 Material von anderen PVC-U-Erzeugnissen
                 als Rohren und Formstücken
Anhang C (normativ) - Einsatz von PP-Neumaterial
Anhang D (normativ) - Verwendung von anderen Materialien
         als PP-Neumaterial
       D.1 Umlaufmaterial, Rücklaufmaterial und
           Rezyklat von Rohren und Formstücken
       D.2 Rücklaufmaterial und Rezyklat mit einer
           vereinbarten Spezifikation
           D.2.1 Material von Rohren und Formstücken
                 aus PP
           D.2.2 Material von anderen PP-Erzeugnissen
                 als Rohren und Formstücken
       D.3 Rücklaufmaterial und Rezyklat ohne eine
           vereinbarte Spezifikation
           D.3.1 Material von Rohren und Formstücken
                 aus PP
           D.3.2 Material von anderen PP-Erzeugnissen
                 als Rohren und Formstücken
Anhang E (normativ) - Einsatz von PE-Neumaterial
Anhang F (normativ) - Verwendung von anderen Materialien
         als PE-Neumaterial
       F.1 Umlaufmaterial, Rücklaufmaterial und
           Rezyklat von Rohren und Formstücken
       F.2 Rücklaufmaterial und Rezyklat mit einer
           vereinbarten Spezifikation
           F.2.1 Material von Rohren und spritzgegossenen
                 Formstücken aus PE
           F.2.2 Material von anderen PE-Erzeugnissen
                 als Rohren und spritzgegossenen
                 Formstücken
       F.3 Rücklaufmaterial und Rezyklat ohne
           eine vereinbarte Spezifikation
           F.3.1 Material von Rohren und spritzgegossenen
                 Formstücken aus PE
           F.3.2 Material von anderen PE-Erzeugnissen
                 als Rohren und spritzgegossenen
                 Formstücken
       F.4 Rücklaufmaterial und Rezyklat von
           rotationsgegossenen Formstücken und anderen
           Rohrleitungsteilen aus PE
Anhang G (normativ) - Prüfung der Schlagzähigkeit
         bei 23 grad C
Anhang H (normativ) - Prüfung der Schlagzähigkeit
         bei -10 grad C
Anhang I (normativ) - Ringflexibilität bei 20%
         Durchbiegung des Durchmessers
Anhang J (informativ) - Übersicht über die
         Möglichkeiten des Einsatzes von
         Rücklaufmaterial und Rezyklat

This standard is included in DIN Handbook 88.

DevelopmentNote
DRAFT 2016 issued in November 2016. (11/2016)
DocumentType
Draft
Pages
106
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded

DIN 1986-4:2011-12 DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 4: FIELDS OF APPLICATION OF SEWAGE PIPES AND FITTINGS OF DIFFERENT MATERIALS
DIN HDBK 88 : 11ED 2016 ENTWAESSERUNGSKANALARBEITEN, DRUCKROHRLEITUNGSARBEITEN AUSSERHALB VON GEBAEUDEN, DRAEN- UND VERSICKERARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18306, ATV DIN 18307, ATV DIN 18308
DIN 1986-4:2019-08 DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 4: FIELDS OF APPLICATION OF SEWAGE PIPES AND FITTINGS OF DIFFERENT MATERIALS
DIN 16961-2:2010-03 THERMOPLASTICS PIPES AND FITTINGS WITH PROFILED WALL AND SMOOTH PIPE INSIDE - PART 2: TECHNICAL DELIVERY SPECIFICATIONS
DIN 16961-1:2011-01 THERMOPLASTICS PIPES AND FITTINGS WITH PROFILED WALL AND SMOOTH PIPE INSIDE - PART 1: DIMENSIONS

EN 1277:2003 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
ISO 580:2005 Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
EN 681-4:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS
ISO 3451-1:2008 Plastics Determination of ash Part 1: General methods
ISO 12091:1995 Structured-wall thermoplastics pipes Oven test
EN 681-1:1996/A3:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
EN 728:1997 Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time
ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
EN 1055:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
EN ISO 3451-1:2008 Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008)
EN ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
EN ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
EN 681-2:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS
EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
EN 922:1994 Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value
ISO 3126:2005 Plastics piping systems Plastics components Determination of dimensions
EN 476:2011 General requirements for components used in drains and sewers
EN 1979:1999 Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
EN 14758-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
EN 727:1994 Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
EN 12666-1:2005+A1:2011 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
EN 744:1995 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
EN ISO 580:2005 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
EN 1401-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN 580:2003 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT)
EN 14741:2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
ISO 9967:2016 Thermoplastics pipes Determination of creep ratio
EN 1905:1998 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
EN 1053:1995 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
ISO 13967:2009 Thermoplastics fittings Determination of ring stiffness
EN ISO 1133:2005 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
ISO 9969:2016 Thermoplastics pipes Determination of ring stiffness
EN 1437:2002 Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
EN 12256:1998 Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
ISO 1133:2005 Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
CEN/TS 14541:2013 Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials
ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method
EN 1446 : 1996 PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RING FLEXIBILITY

View more information
US$126.43
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.