• There are no items in your cart

DIN EN 14180:2014-09

Current
Current

The latest, up-to-date edition.

STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
Available format(s)

Hardcopy , PDF

Language(s)

German

Published date

09-01-2014

National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Process control
6 Performance requirements
7 Sound power and vibration
8 Packaging, marking and labelling
9 Information to be supplied by the
   manufacturer
10 Service and local environment
Annex A (normative) - Test methods
Annex B (normative) - Sterilizer classification
        and testing
Annex C (normative) - Test equipment
Annex D (normative) - Determination of formaldehyde
        residuals in a filter indicator
Annex E (informative) - Formaldehyde residues on
        medical devices
Annex F (informative) - Environmental aspects
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 93/42/EEC
         on medical devices
Bibliography

This standard is included in DIN Handbook 169.

Committee
TC 102
DevelopmentNote
Supersedes DIN 58948-12 and DIN 58948-13 Together with DIN 58948-17 supersedes DIN 58948-15 (10/2003)
DocumentType
Standard
Pages
69
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current
Supersedes

Standards Relationship
UNE-EN 14180:2004 Identical
NEN EN 14180 : 2014 Identical
NBN EN 14180 : 2014 Identical
UNI EN 14180 : 2014 Identical
SN EN 14180 : 2014 Identical
I.S. EN 14180:2014 Identical
EN 14180:2014 Identical
BS EN 14180:2014 Identical
NF EN 14180 : 2014 Identical
NS EN 14180 : 2014 Identical

VDI 6300 Blatt 1:2016-05 Genetic engineering operations in genetic engineering facilities - Guidance on safe operation of genetic engineering facilities
DIN HDBK 169 : 6ED 2015

IEC 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
EN 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
DIN ISO 8787:1994-06 TESTING OF PAPER AND BOARD - DETERMINATION OF CAPILLARY RISE - KLEMM METHOD
EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
ISO 1874-1:2010 Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system and basis for specification
EN 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 60584-2:1993 Thermocouples - Part 2: Tolerances
DIN ISO 3781:2012-07 Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011)
EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
EN ISO 1874-1:2010 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010)
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
EN 868-5:2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 1762:2015 Paper, board and pulps Determination of residue (ash) on ignition at 525 degrees C
ISO 13485:2016 Medical devices Quality management systems Requirements for regulatory purposes
ISO 2758:2014 Paper Determination of bursting strength
ISO 4017:2014 Fasteners Hexagon head screws Product grades A and B
EN 867-5:2001 Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S
IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
ISO 25424:2009 Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices
EN 62304:2006/A1:2015 MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015)
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN ISO 11138-1:2017 Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2017)
ISO 8787:1986 Paper and board — Determination of capillary rise — Klemm method
EN ISO 25424:2011 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009)
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
EN 1041:2008+A1:2013 Information supplied by the manufacturer of medical devices
EN 764-7:2002/AC:2006 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
IEC 62304:2006+AMD1:2015 CSV Medical device software - Software life cycle processes
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012)
EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
EN 60751:2008 INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS
ISO/TS 11139:2006 Sterilization of health care products Vocabulary
AAMI RD47 : 2008 REPROCESSING OF HEMODIALYZERS
ISO 3781:2011 Paper and board — Determination of tensile strength after immersion in water
EN 62061:2005/A2:2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
ISO 536:2012 Paper and board Determination of grammage
IEC 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN ISO 2758:2014 Paper - Determination of bursting strength (ISO 2758:2014)
EN ISO 14971:2012 Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01)
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
ISO 534:2011 Paper and board — Determination of thickness, density and specific volume
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ISO 11138-1:2017 Sterilization of health care products — Biological indicators — Part 1: General requirements
EN 14222:2003 Stainless steel shell boilers
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
EN ISO 17665-1 : 2006 Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006)
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
ISO 14971:2007 Medical devices Application of risk management to medical devices
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
ISO 15223-1:2016 Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements
IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
ISO 11138-5:2017 Sterilization of health care products — Biological indicators — Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes
EN 1422:2014 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN ISO 11138-5:2017 Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2017)
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
ISO 17665-1:2006 Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
EN ISO 534:2011 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

View more information
US$162.29
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.