• There are no items in your cart

DIN EN 1433:2005-09

Current
Current

The latest, up-to-date edition.

DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2005

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Places of installation for drainage channels
6 Materials
   6.1 General
       6.1.1 Drainage channels
       6.1.2 Gratings and covers
       6.1.3 Use of rolled steel
   6.2 Production, quality and testing
       6.2.1 Metallic materials
       6.2.2 Concrete and synthetic resin concrete
   6.3 Additional requirements
       6.3.1 Welding of rolled steel
       6.3.2 Stainless steel
       6.3.3 Precast concrete
       6.3.4 Synthetic resin concrete
       6.3.5 Concrete with fibre
7 Design and manufacturing requirements
   7.1 General
   7.2 Dimensions and dimensional tolerances
   7.3 Geometric design
   7.4 Gradient
   7.5 Jointing of drainage channel units
       7.5.1 Watertightness
       7.5.2 Step of invert
   7.6 Depth of insertion of gratings and covers
   7.7 Seating
   7.8 Trafficked edge and contact surface protection
   7.9 Securing of gratings or cover
   7.10 Dimensions of inlet openings
        7.10.1 Straight slots
        7.10.2 Slots in other shapes
        7.10.3 Other inlet openings
   7.11 Dirt buckets
   7.12 Correct positioning of gratings and covers
   7.13 Surface condition
   7.14 Opening angle of hinged gratings and covers
   7.15 Strength testing
        7.15.1 Channel bodies
        7.15.2 Gratings and covers
   7.16 Permanent set
   7.17 Recommendations for installation
8 Marking
   8.1 Marking of gratings and covers
   8.2 Marking of channel bodies
9 Testing
   9.1 Loading test
       9.1.1 Test loads
       9.1.2 Test apparatus
       9.1.3 Preparation for the test
       9.1.4 Test procedure
   9.2 Materials
        9.2.1 Precast concrete
        9.2.2 Synthetic resin concrete
        9.2.3 Concrete with fibre
   9.3 Design requirements
       9.3.1 General inspection
       9.3.2 Dimensions
       9.3.3 Discharge cross section (see 7.3)
       9.3.4 Gradient (see 7.4)
       9.3.5 Discharge openings/connecting openings
       9.3.6 Jointing of channel units(see 7.5)
       9.3.7 Depth of insertion of gratings and covers(see 7.6)
       9.3.8 Seating (see 7.7)
       9.3.9 Trafficked edge protection (see 7.8 and 6.1)
       9.3.10 Securing of grating and/or cover in a grid unit
              (see 7.9)
       9.3.11 Dimensions of inlet openings (see 7.10)
       9.3.12 Dirt buckets (see 7.11)
       9.3.13 Correct positioning of gratings and covers
              (see 7.12)
       9.3.14 Surface condition (see 7.13)
       9.3.15 Opening angle of hinged gratings and covers
              (see 7.14)
   9.4 Marking (see clause 8)
   9.5 Type testing
   9.6 Routine loading test
10 Evaluation of Conformity
   10.1 General
   10.2 Type testing (initial testing of the product)
   10.3 Factory production control to be carried out by the
        manufacturer (internal quality control)
   10.4 Non-conforming products
11 Installation
Annex A (normative) Model procedure of internal
        quality control
Annex B (normative) Supplementary requirements for
        concrete products submitted to very severe
        freeze-thaw conditions with standing water
        containing de-icing salts
        B.1 Scope
        B.2 Conditions of application
        B.3 Resistance to freeze-thaw with de-icing salts
        B.4 Marking
Annex C (normative) Determination of freeze/thaw resistance
        with de-icing salt
        C.1 Principle
        C.2 Sampling
        C.3 Materials
        C.4 Apparatus
        C.5 Preparation of test specimens
        C.6 Procedure
        C.7 Expression of test results
        C.8 Test report
Annex D (informative) Inspection control, carried out by a
        third party certification body (third party control)
        D.1 Purpose and procedure of third party Inspection
        D.2 Report by the third party
Annex ZA (informative) Clauses of this European Standard
         addressing the provisions of the EU Construction
         products Directive
Bibliography

This standard is included in DIN Handbook 13-1, 13-6 and 465. Specifies requirements for linear drainage channels for the collection and conveyance of surface water when installed within areas subjected to pedestrian and/or vehicular traffic.

DevelopmentNote
Supersedes DIN 19580 issue 12-1988. (04/2003)
DocumentType
Standard
Pages
57
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

DIN HDBK 465 : 2ED 2013 VERKEHRSWEGEBAUARBEITEN - ANWENDUNGSREGELN, VORWIEGEND MINERALISCHE BAUTEILE, ANDERE BAUSTOFFE UND BAUTEILE
DIN HDBK 13-6 : 2ED 2013 SCHAECHTE FUER ABWASSERLEITUNGEN UND -KANAELE, STRASSENENTWAESSERUNGSGEGENSTAENDE
DIN HDBK 13-1 : 16ED 2018 ABWASSERTECHNIK 1 - GEBAEUDE- UND GRUNDSTUECKSENTWAESSERUNG - ENTWAESSERUNGSGEGENSTAENDE
DIN HDBK 356 : 1ED 2004 ABWASSERTECHNIK 6 - SCHAECHTE FUER ABWASSERLEITUNGEN UND -KANAELE, STRASSENENTWAESSERUNGSGEGENSTAENDE
DIN HDBK 13 : 14ED 2004 WASTE WATER ENGINEERING 1. STANDARDS FOR SITE DRAINAGE
DIN 18318:2016-09 GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - ROAD CONSTRUCTION - DRY JOINTED SETT AND SLAB PAVEMENTS, AND SURROUNDS

EN 10142 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
EN 10215 : 1995 CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 1170-5:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN 476:2011 General requirements for components used in drains and sewers
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ENV 10080 : 1995 STEEL FOR THE REINFORCEMENT OF CONCRETE WELDABLE RIBBED REINFORCING STEEL B500 - TECHNICAL DELIVERY CONDITIONS FOR BARS, COILS AND WELDED FABRIC
EN 1169:1999 Precast concrete products - General rules for factory production control of glass-fibre reinforced cement
EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control
EN 10214 : 1995 CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
ISO 9001:2015 Quality management systems — Requirements
EN 1563:2011 Founding - Spheroidal graphite cast irons
ISO 4012:1978 Concrete — Determination of compressive strength of test specimens
ISO 185:2005 Grey cast irons Classification
ISO 630:1995 Structural steels Plates, wide flats, bars, sections and profiles
ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
ISO 3755:1991 Cast carbon steels for general engineering purposes
EN 12163:2016 Copper and copper alloys - Rod for general purposes
ISO 8062:1994 Castings System of dimensional tolerances and machining allowances
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels

View more information
US$165.46
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.