|
EN 1301-2:2008
|
Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties
|
|
EN 485-1:2016
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
|
|
EN 755-1:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
|
|
EN 754-3:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
|
|
EN 754-7:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
|
|
EN 755-5:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form
|
|
EN 1301-1:2008
|
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
|
|
EN 485-3:2003
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
|
|
EN 755-9:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
|
|
EN 485-2:2016
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
|
|
EN 485-4:1993
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
|
|
EN 755-3:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
|
|
89/106/EEC : 1988
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
|
|
EN 1592-1:1997
|
Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery
|
|
EN 586-2:1994
|
Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements
|
|
EN 13920-1:2003
|
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests
|
|
EN 755-8:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
|
|
EN 1396:2015
|
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
|
|
EN 755-4:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
|
|
EN 586-3:2001
|
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
|
|
EN 755-7:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
|
|
EN 12020-2:2016/AC:2017
|
ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM
|
|
EN 1301-3:2008
|
Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
|
|
EN 754-6:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
|
|
EN 755-6:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form
|
|
EN 12258-1:2012
|
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
|
|
PREN 1090-1 : DRAFT 2004
|
STEEL AND ALUMINIUM STRUCTURAL COMPONENTS - GENERAL DELIVERY CONDITIONS
|
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
|
EN 1706:2010
|
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
|
|
EN 754-1:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
|
|
EN 1559-1:2011
|
Founding - Technical conditions of delivery - Part 1: General
|
|
EN 1592-4:1997
|
Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes
|
|
EN 515:2017
|
Aluminium and aluminium alloys - Wrought products - Temper designations
|
|
EN 754-5:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
|
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
|
PREN 1090-3 : DRAFT 2017
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
|
|
EN 586-1:1997
|
Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery
|
|
ISO 9001:2015
|
Quality management systems — Requirements
|
|
EN 754-8:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
|
|
ISO 1519:2011
|
Paints and varnishes Bend test (cylindrical mandrel)
|
|
EN 754-2:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
|
|
EN ISO 1519:2011
|
Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
|
|
EN 1386:2007
|
Aluminium and aluminium alloys - Tread plate - Specifications
|
|
EN 1999-1-2:2007/AC:2009
|
EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
|
|
EN 1592-2:1997
|
Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties
|
|
ENV 1999-1-2 : 1998
|
EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN
|
|
EN 1559-4:2015
|
Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings
|
|
EN 1592-3:1997
|
Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes
|
|
EN 754-4:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
|
|
EN 573-3:2013
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
|
|
EN 755-2:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
|
|
EN 12020-1:2008
|
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
|
|
ISO 8062:1994
|
Castings System of dimensional tolerances and machining allowances
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.