DIN EN 15346:2015-01
Current
The latest, up-to-date edition.
Hardcopy , PDF
German, English
01-01-2015
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Characterization of PVC recyclates
5 Quality assurance
Annex A (informative) - Typical compositions
of PVC compounds
Annex B (normative) - Determination of bulk density
Annex C (normative) - Determination of tetrahydrofuran
insoluble impurities
Annex D (normative) - Size and distribution of particles
contained in micronized recycled PVC compounds
by sieving
Annex E (normative) - Size and distribution of recycled
PVC crushes by sieving
Annex F (normative) - Fitness for processing of PVC
recyclates by calendering
Annex G (normative) - Fitness for processing of PVC
recyclates by extrusion
Bibliography
This standard is included in DIN Handbook KUNSTSTOFFE BAND 2 and 3.
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
SN EN 15346 : 2015 | Identical |
EN 15346:2014 | Identical |
BS EN 15346:2014 | Identical |
NS EN 15346 : 2014 | Identical |
NF EN 15346 : 2014 | Identical |
NEN EN 15346 : 2014 | Identical |
I.S. EN 15346:2014 | Identical |
NBN EN 15346 : 2014 | Identical |
DIN HDBK KUNSTSTOFFE BAND 3 : 2016 | HANDBUCH KUNSTSTOFFE - BAND 3 - THERMOPLASTISCHE KUNSTSTOFF-FORMMASSEN |
ISO 182-2:1990 | Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 2: pH method |
EN ISO 1269:2006 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) (ISO 1269:2006) |
EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
CEN/TR 15353:2007 | Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics |
EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
ISO 182-3:1993 | Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 3: Conductometric method |
EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
EN 1453-1:2017/AC:2017 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
ISO 182-4:1993 | Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 4: Potentiometric method |
EN ISO 11468 : 1999 | PLASTICS - PREPARATION OF PVC PASTES FOR TEST PURPOSES - DISSOLVER METHOD |
EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
DIN ISO 565:1998-12 | TEST SIEVES - METAL WIRE CLOTH, PERFORATED METAL PLATE AND ELECTROFORMED SHEET - NOMINAL SIZES OF OPENINGS |
ISO 11468:1997 | Plastics — Preparation of PVC pastes for test purposes — Dissolver method |
ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
EN ISO 3451-5:2002 | Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002) |
ISO 6186:1998 | Plastics — Determination of pourability |
ISO 472:2013 | Plastics Vocabulary |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
NFT 54 405-1 : 2002 | UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) EXTRUDED OR COEXTRUDED PROFILES FOR OUTSIDE USE - SPECIFICATIONS AND TEST METHODS - PART 1: SOLID WALL PVC-U |
ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
EN ISO 6186:1998 | Plastics - Determination of pourability (ISO 6186:1998) |
ISO 9001:2015 | Quality management systems — Requirements |
EN 1401-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
ASTM D 3678 : 2014 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
ISO 3451-5:2002 | Plastics — Determination of ash — Part 5: Poly(vinyl chloride) |
EN ISO 182-2 : 1999 | PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 2 - PH METHOD |
EN 12608:2003 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods |
ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
ASTM D 3679 : 2017 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
EN ISO 182-4 : 2000 | PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 4: POTENTIOMETRIC METHOD |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
ISO 1269:2006 | Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of volatile matter (including water) |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN ISO 306:2013 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
EN ISO 182-3:2000 | Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993) |
EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
EN 12099:1997 | Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content |
ISO 182-1:1990 | Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 1: Congo red method |
EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
CEN/TS 14541:2013 | Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.