• There are no items in your cart

DIN EN 1760-1:2009-08

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
Available format(s)

Hardcopy , PDF

Superseded date

08-01-2013

Language(s)

English

Published date

01-01-2009

Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Anforderungen
  4.1 Allgemeines
  4.2 Betätigungskraft
  4.3 Ansprechzeit
  4.4 Statische Belastung
  4.5 Anzahl der Schaltspiele
  4.6 Ausgangszustand des Signalgebers
  4.7 Ansprechen der Ausgangsschalteinrichtung(en)
       auf die Betätigungskraft
  4.8 Zugang für Wartungsarbeiten
  4.9 Einstelleinrichtungen
  4.10 Anschlusselemente
  4.11 Umgebungsbedingungen
  4.12 Energieversorgung
  4.13 Elektrische Ausrüstung
  4.14 Gehäuse
  4.15 Kategorien für sicherheitsbezogene Teile
       der Steuerung nach EN 954
  4.16 Befestigungen des Signalgebers
  4.17 Stolpergefahr
  4.18 Rutschgefahr und Weichheit der
       Signalgeberoberflächen
  4.19 Zusätzliche Abdeckungen der
       Oberflächen für Signalgeber
  4.20 Störung durch Blockierung oder Verkeilen
5 Kennzeichnung
  5.1 Schaltmatte/Schaltplatte
  5.2 Kennzeichnung der Signalverarbeitung
  5.3 Kennzeichnung des Signalgebers
6 Benutzerinformation
  6.1 Allgemeines
  6.2 Betriebsanleitung
7 Prüfung
  7.1 Allgemeines
  7.2 Signalgeberprüfmuster
  7.3 Prüfkörper für Belastungsprüfungen
  7.4 Prüfung Nr. 1: Betätigungskraft
  7.5 Prüfung Nr. 2: Ansprechzeit
  7.6 Prüfung Nr. 3: Statische Belastung
  7.7 Prüfung Nr. 4: Anzahl der Schaltspiele
  7.8 Prüfung Nr. 5: Ausgangszustand des
       Signalgebers
  7.9 Prüfung Nr. 6: Ansprechen der
       Ausgangsschalteinrichtung auf die
       Betätigungskraft
  7.10 Prüfung Nr. 7: Zugang für
       Wartungsarbeiten
  7.11 Prüfung Nr. 8: Einstellungen
  7.12 Prüfung Nr. 9: Anschlusselemente
  7.13 Prüfung Nr. 10 Verhalten bei
       Umgebungsbedingungen
  7.14 Prüfung Nr. 11: Elektrische
       Energieversorgung
  7.15 Prüfung Nr. 12: Elektrische Ausrüstung
  7.16 Prüfung Nr. 13: Gehäuse
  7.17 Prüfung Nr. 14: Kategorien für
       sicherheitsbezogene Teile der Steuerung
       nach EN 954
  7.18 Prüfung Nr. 15: Rutschgefahr und Weichheit
       der Signalgeberoberflächen
  7.19 Prüfung Nr. 16: Zusätzliche Abdeckungen
       der Oberflächen für Signalgeber
  7.20 Prüfung Nr. 17: Störung durch Blockierung
       oder Verkeilen
Anhang A (normativ) Pulsdiagramme für Einrichtungen
          mit und ohne Rückstellfunktionen
Anhang B (informativ) Anmerkungen zur Anwendung
Anhang C (informativ) Anmerkungen zur Konstruktion
Anhang D (informativ) Einbau, Inbetriebnahme und
          Prüfung
Anhang ZA (informativ) Zusammenhang zwischen dieser
          Europäischen Norm und den grundlegenden
          Anforderungen der EG-Richtlinie 98/37/EG
Anhang ZB (informativ) Zusammenhang zwischen dieser
          Europäischen Norm und den grundlegenden
          Anforderungen der EG-Richtlinie 2006/42/EG
Literaturhinweise

Defines requirements for pressure sensitive mats and floors normally actuated by the feet for use as safety devices to protect persons from dangerous machinery.

DocumentType
Standard
Pages
56
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy

DIN 18650-2:2010-02 POWERED PEDESTRIAN DOORS - PART 2: SAFETY AT POWERED PEDESTRIAN DOORS
DIN EN ISO 8230-1:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS

EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO 7250:1996 Basic human body measurements for technological design
EN 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN ISO 14121-1:2007 Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
DIN EN 60068-2-6 : 1996 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
DIN EN 60068-2-14 : 2010 ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
ISO 14121-1:2007 Safety of machinery Risk assessment Part 1: Principles
ISO 6431:1992 Pneumatic fluid power Single rod cylinders, 1 000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm Mounting dimensions
EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
IEC 60068-2-3:1969 Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 60439-1:1999+AMD1:2004 CSV Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
DIN EN 60068-2-78 : 2014 ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE (IEC 60068-2-78:2012)
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 60439-1:1999/A1:2004 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN ISO 7250 : 1997 BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

View more information
US$138.41
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.