• There are no items in your cart

DIN EN 60068-2-27 : 1995

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
Available format(s)

Hardcopy

Superseded date

11-06-2021

Language(s)

English

Published date

01-01-1995

National foreword
1. Object
2. General description
3. Definitions
4. Description of test apparatus
5. Severities
6. Pre-conditioning
7. Initial measurements
8. Conditioning
9. Recovery
10. Final measurements
11. Information to be given in the relevant
     specification
Appendices
A. Guidance
B. Shock response spectra and other characteristics
     of pulse shapes
C. Comparison between impact tests
Tables
I. Acceleration and duration of the pulse
II. Examples of pulse shapes and test severities
     typically employed for various applications
Figures
1. Final-peak saw-tooth pulse
2. Half-sine pulse
3. Trapezoidal pulse
4. Frequency characteristics of the measuring system
5. Shock response spectrum of a final-peak saw-tooth
     pulse
6. Shock response spectrum of a symmetrical half-sine
     pulse
7. Shock response spectrum of a symmetrical trapezoidal
     pulse
8. Framework or box containing oscillatory systems of
     which f1, f2 and f3 are examples of resonance
     frequencies
9a. Exciting pulse
9b. Responses for f1, f2 and f3
9c. Spectra which result from an infinite number of
     frequencies, with f1, f2 and f3 shown as finite
     points on the continuous curves
10. Framework containing damped multi-degree-of-freedom
     system
11. Shock response spectrum of a half-sine pulse with
     ripple
12. Spectrum of a final-peak saw-tooth 300 m/(s squared),
     18 ms pulse compared with the spectra of
     200 m/(s squared) half-sine pulses with durations
     between 3 ms and 20 ms

Dieser Teil der Norm gibt ein Prüfverfahren an, mit dem die Widerstandsfähigkeit von Prüflingen gegenüber nicht-wiederholbaren oder wiederholbaren Schocks mit vorgegebenemn Schärfegrad ermittelt werden kann.

DevelopmentNote
Supersedes DIN IEC 60068-2-27. (05/2002) Supersedes DIN EN 60068-2-29. (02/2010)
DocumentType
Standard
Pages
26
PublisherName
Verband Deutscher Elektrotechniker
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
IEC 60068-2-27:2008 Identical
I.S. EN 60068-2-27:2009 Identical
EN 60068-2-27:2009 Identical
UNE-EN 60068-2-27:2011 Identical
BS EN 60068-2-27:2009 Identical
SN EN 60068-2-27 : 1993 Identical
VDE 0468-2-27 : 2010 Corresponds

DIN EN 175200:1996-11 SECTIONAL SPECIFICATION - CIRCULAR CONNECTORS
DIN EN ISO 13856-2:2013-08 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
DIN ISO 9022-22:2012-10 Optics and photonics - Environmental test methods - Part 22: Combined cold, dry heat or temperature change with bump or random vibration (ISO 9022-22:2012)
DIN EN 138000 : 1997 GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
DIN EN ISO 21649:2010-01 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
DIN EN ISO 13856-3 E : 2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
VDS 2160 : 2000 GLASFASSAUSLOESEELEMENTE FUER SPRINKLERANLAGEN - ANFORDERUNGEN UND PRUEFMETHODEN
DIN EN 60068-4:1996-10 ENVIRONMENTAL TESTING - PART 4: INFORMATION FOR SPECIFICATION WRITERS - TEST SUMMARIES
DIN EN 14744 E : 2006 INLAND NAVIGATION VESSELS AND SEA-GOING VESSELS - NAVIGATION LIGHT
DIN EN 14744:2006-01 Inland navigation vessels and sea-going vessels - Navigation light
DIN EN ISO 11608-4:2016-03 (Draft) PEN-INJECTORS FOR MEDICAL USE - PART 4: REQUIREMENTS AND TEST METHODS FOR ELECTRONIC AND ELECTROMECHANICAL PEN-INJECTORS
KTA 3505 : 2015(R2017) TYPE TESTING OF MEASURING SENSORS AND TRANSDUCERS OF THE INSTRUMENTATION AND CONTROL SYSTEM IMPORTANT TO SAFETY
VDE 0560-800 : 1998 GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
DIN EN 137000 : 1998-03 GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
VDE 0557-1 : 2001 LOW-VOLTAGE POWER SUPPLY DEVICES, DC OUTPUT - PERFORMANCE CHARACTERISTICS AND SAFETY REQUIREMENTS
DIN EN 60938-1 : 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
VDI/VDE/DKD 2638:2008-10 Characteristics of force transducers - Terms and definitions
VDI 4464:2012-05 Operation of industrial trucks with RFID components
DIN ISO 9022-3:2015-08 Optics and photonics - Environmental test methods - Part 3: Mechanical stress (ISO 9022-3:2015)
DIN EN 60721-1:1997-02 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 1: ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES
DIN IEC 60679-2:1997-09 QUARTZ CRYSTAL CONTROLLED OSCILLATORS - PART 2: GUIDE TO THE USE OF QUARTZ CRYSTAL CONTROLLED OSCILLATORS
DIN EN 165000-1:1996-11 FILM AND HYBRID INTEGRATED CIRCUITS - PART 1: GENERIC SPECIFICATION - CAPABILITY APPROVAL PROCEDURE
DIN EN ISO 25197:2015-03 SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE (ISO 25197:2012 + AMD 1:2014)
DIN EN ISO 20072:2013-10 AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009)
DIN ISO 9022-22 E : 2012 OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 22: COMBINED COLD, DRY HEAT OR TEMPERATURE CHANGE WITH BUMP OR RANDOM VIBRATION (ISO 9022-22:2012)
DIN EN ISO 13856-3:2013-12 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
DIN 45662:1996-12 VIBRATION MEASURING INSTRUMENTATION - FUNDAMENTAL REQUIREMENTS AND VERIFICATION
DIN EN 61268 : 1996 ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
DIN V ENV 50091-3 : 2000 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: PERFORMANCE REQUIREMENTS
DIN EN 50021 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N"
DIN 32877:2000-08 Optoelectronic measurement of form, profile and distances
DIN 32876-2:1999-06 VERIFICATION OF GEOMETRICAL PARAMETERS - ELECTRICAL LINEAR MEASUREMENT - PART 2: DIGITAL RECEPTION OF THE MEASURED QUANTITY; CONCEPTS, REQUIREMENTS, TESTING
DIN EN ISO 21649 E : 2010 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS

View more information
US$185.80
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.