DIN EN 60068-4:1996-10
Current
Current
The latest, up-to-date edition.
ENVIRONMENTAL TESTING - PART 4: INFORMATION FOR SPECIFICATION WRITERS - TEST SUMMARIES
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
01-01-1996
Vorwort
1 Zweck
2 Allgemeines
3 Begriffe
4 Übersicht der Zusammenfassungen für die Prüfungen
5 Liste der Leitfäden
6 Zusammenfassungen zu den Prüfungen
Summarizes information on individual environmental tests in order to serve purposes of specification writers and others when a detailed standard knowledge is not required. Not intended as a substitute for the complete standard.
| DevelopmentNote |
Supersedes DIN IEC 60068 SUPP1. (05/2003)
|
| DocumentType |
Standard
|
| Pages |
86
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 60068-4:1997 | Identical |
| SN EN 60068-4 : 1996 | Identical |
| NF EN 60068-4 : 1996 | Identical |
| BS EN 60068-4:1996 | Identical |
| I.S. EN 60068-4:1997 | Identical |
| NBN EN 60068-4 : 1996 | Identical |
| EN 60068-4:1996 | Identical |
| IEC 60068-4:1987 | Identical |
| DIN EN 60068-2-70:1996-07 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST XB: ABRASION OF MARKINGS AND LETTERINGS CAUSED BY RUBBING OF FINGERS AND HANDS |
| DIN IEC 60068-2-21:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES |
| DIN IEC 60068-2-49:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; GUIDANCE TO TEST KC: SULPHUR DIOXIDE SO2 (HIGH CONCENTRATION) FOR ELECTRICAL CONTACTS AND CONNECTIONS CONNECTIONS |
| DIN EN 60068-2-57 : 2015 | ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD (IEC 60068-2-57:2013) |
| DIN EN 60068-2-2 : 1995 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
| DIN EN 60068-2-45:1994-02 | BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS; TEST XA AND GUIDANCE: IMMERSION IN CLEANING SOLVENTS |
| DIN EN 60068-2-67:1996-07 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST CY: DAMP HEAT, STEADY STATE, ACCELERATED TEST PRIMARILY INTENDED FOR COMPONENTS |
| DIN EN 60068-2-44:1996-02 | ENVIRONMENTAL TESTING - PART 2: TESTS; GUIDANCE ON TEST T: SOLDERING |
| DIN IEC 60068-2-3:1986-12 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST CA: DAMP HEAT, STEADY STATE |
| DIN IEC 60068-2-30:1986-09 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TEST DB AND GUIDANCE - DAMP HEAT, CYCLIC (12 + 12 HOUR CYCLE) |
| DIN IEC 60068-2-20:1991-04 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST T: SOLDERING |
| DIN IEC 60068-2-28:1991-05 | ELECTRICAL ENGINEERING; ENVIRONMENTAL TESTING; GUIDANCE FOR DAMP HEAT TESTS |
| DIN IEC 60068-2-40:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS |
| DIN EN 60068-2-68:1997-02 | ENVIRONMENTAL TESTING - PART 2: TESTS; TEST L: DUST AND SAND |
| DIN IEC 60068-2-46:1985-08 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - GUIDANCE TO TEST KD: HYDROGEN SULPHIDE H[2]S (HIGH CONCENTRATION) FOR ELECTRICAL CONTACTS AND CONNECTIONS |
| DIN 40046-24:1977-09 | ENVIRONMENTAL TESTING FOR ELECTRICAL ENGINEERING - TEST-GROUP F, TEST F[DB]: RANDOM VIBRATION WIDE BAND, REPRODUCIBILITY MEDIUM |
| DIN EN 60068-2-64 : 1995 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| DIN IEC 60068-2-5:1982-11 | BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS; TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL |
| DIN IEC 60068-2-58 : 1992 | ELECTRICAL ENGINEERING; ENVIRONMENTAL TESTING; TEST TD: SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVIANCES (SMD) |
| DIN IEC 60068 Beiblatt 2:1983-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - LIST OF TERMS |
| DIN IEC 60068-2-33:1980-04 | BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS, GUIDANCE ON CHANGE OF TEMPERATURE TESTS |
| DIN IEC 60068-2-39:1979-12 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST Z/AMD: COMBINED SEQUENTIAL COLD, LOW AIR PRESSURE AND DAMP HEAT TEST |
| DIN IEC 60068-2-11:1982-08 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST KA: SALT MIST |
| DIN IEC 60068-2-14:1987-06 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST N: CHANGE OF TEMPERATURE |
| DIN EN 60068-2-6 : 1996 | ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
| DIN EN 60068-2-62:1995-08 | ENVIRONMENTAL TESTING - TEST METHODS - TEST EF: IMPACT, PENDULUM HAMMER |
| DIN IEC 60068-2-50:1985-08 | ELECTROTECHNICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Z/AFC: COMBINED COLD/VIBRATION (SINUSOIDAL); TESTS FOR BOTH-HEAT-DISSIPATING AND NON-HEAT-DISSIPATING SPECIMENS |
| DIN EN 60068-2-69 : 2007 | ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD (IEC 60068-2-69:2017) |
| DIN EN 60068-2-17:1995-05 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Q: SEALING |
| DIN IEC 60068-2-10:1991-04 | ELECTRICAL ENGINEERING; ENVIRONMENTAL TESTING PROCEDURES TEST J AND GUIDANCE: MOULD GROWTH |
| DIN IEC 60068-2-43:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST KD: HYDROGEN SULPHIDE H2S (HIGH CONCENTRATION) FOR ELECTRICAL CONTACTS AND CONNECTIONS |
| DIN 40046-25:1977-09 | ENVIRONMENTAL TESTING FOR ELECTRICAL ENGINEERING - TEST-GROUP F, TEST F[DC]: RANDOM VIBRATION WIDE BAND, REPRODUCIBILITY LOW |
| DIN EN 60068-2-1 : 1995 | ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD |
| DIN EN 60068-2-27 : 1995 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| DIN IEC 60068-3-1:1979-04 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 3: BACKGROUND INFORMATION - SECTION 1: COLD AND DRY HEAT TESTS |
| DIN IEC 60068-2-48:1984-02 | BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS; GUIDANCE ON THE APPLICATION OF THE TESTS OF IEC PUBLICATION 60068 TO SIMULATE THE EFFECTS OF STORAGE |
| DIN IEC 60068-2-9:1987-02 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; GUIDANCE FOR SOLAR RADIATION TESTING |
| DIN EN 60068-1 : 2015 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013) |
| DIN EN 60068-2-32:1995-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS; TEST ED: FREE FALL |
| DIN EN 60068-2-60 : 2016 | ENVIRONMENTAL TESTING - PART 2-60: TESTS - TEST KE: FLOWING MIXED GAS CORROSION TEST (IEC 60068-2-60:2015) |
| DIN IEC 60068-2-53:1986-10 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; GUIDANCE TO TESTS Z/AFC AND Z/BFC: COMBINED TEMPERATURE (COLD AND DRY HEAT) AND VIBRATION (SINUSOIDAL) TESTS |
| DIN IEC 60068-5-2:1992-05 | ELECTRICAL ENGINEERING; ENVIRONMENTAL TESTING; GUIDE TO DRAFTING OF TEST METHODS; TERMS AND DEFINITIONS |
| DIN IEC 60068-2-56:1990-07 | ELECTRICAL ENGINEERING; ENVIRONMENTAL TESTING; TEST CB: DAMP HEAT, STEADY STATE, PRIMARILY FOR EQUIPMENT |
| DIN IEC 60068 Beiblatt 10:1985-08 | ELECTROTECHNIC - BASIC ENVIRONMENTAL TESTING PROCEDURES - GENERAL CONSIDERATIONS ON ULTRASONIC CLEANING |
| DIN EN 60068-2-7:1995-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS; TEST GA AND GUIDANCE: ACCELERATION, STEADY STATE |
| DIN EN 60068-2-47:2006-03 | ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS |
| DIN EN 60068-2-29:1995-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS; TEST EB AND GUIDANCE: BUMP |
| DIN EN 60068-2-61:1993-12 | ENVIRONMENTAL TESTING; PART 2: TEST METHODS; TEST Z/ABDM: CLIMATIC SEQUENCE |
| DIN IEC 60068-2-52:1985-07 | ELECTRONIC; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION) |
| DIN 40046-23:1977-09 | ENVIRONMENTAL TESTING FOR ELECTRICAL ENGINEERING - TEST-GROUP F, TEST F[DA]: RANDOM VIBRATION WIDE BAND, REPRODUCIBILITY HIGH |
| DIN IEC 60068-2-42:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST KC - SULPHUR DIOXIDE SO[2] (HIGH CONCENTRATION) FOR ELECTRICAL CONTACTS AND CONNECTIONS |
| DIN IEC 60068-2-51:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Z/BFC: COMBINED DRY HEAT/VIBRATION (SINUSOIDAL); TESTS FOR BOTH HEAT-DISSIPATING AND NON-HEAT-DISSIPATING SPECIMENS |
| DIN EN 60068-2-66:1995-06 | ENVIRONMENTAL TESTING - TEST METHODS - TEST CX: DAMP HEAT, STEADY STATE (UNSATURATED PRESSURIZED VAPOUR) |
| DIN IEC 60068-5-1:1994-02 | ENVIRONMENTAL TESTING; GUIDE TO DRAFTING OF TEST METHODS; GENERAL PRINCIPLES |
| DIN IEC 60068-3-3:1993-09 | Environmental testing; seismic test methods for equipments; guidance; identical with IEC 60068-3-3:1991 |
| DIN IEC 60068-2-41:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS |
| DIN IEC 60068-2-13:1985-08 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST M: LOW AIR PRESSURE |
| DIN EN 60068-2-63:1995-03 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER |
| DIN EN 60068-2-31 : 2009 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| DIN EN 60068-2-59:1995-03 | ENVIRONMENTAL TESTING - PART 2: TESTS METHODS; TEST FE: VIBRATION, SINE BEAT METHOD |
| DIN EN 60068-2-65 : 2015 | ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD (IEC 60068-2-65:2013) |
| DIN IEC 60068-3-2:1979-04 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 3: BACKGROUND INFORMATION - SECTION TWO: COMBINED TEMPERATURE/LOW AIR PRESSURE TESTS |
| DIN IEC 60068-2-54:1988-01 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS T; SOLDERING; TEST TA; SOLDERABILITY TESTING BY THE WETTING BALANCE METHOD |
| DIN IEC 60068-2-18:1991-04 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST R AND GUIDANCE: WATER |
| DIN 40046-22 Beiblatt 1:1977-09 | ENVIRONMENTAL TESTING FOR ELECTRICAL ENGINEERING - TEST GROUP F, TEST F[D]: RANDOM VIBRATION WIDE BAND, GENERAL REQUIREMENTS |
| DIN EN 60068-2-55 : 2014 | ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE - LOOSE CARGO TESTING INCLUDING BOUNCE (IEC 60068-2-55:2013) |
| DIN IEC 60068-2-38:1979-04 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST Z/AD: COMPOSITE TEMPERATURE/HUMIDITY, CYCLIC TEST |
US$144.66
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.