• There are no items in your cart

DIN EN 710:2010-10

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment (includes Amendment A1:2010)
Available format(s)

Hardcopy , PDF

Superseded date

10-01-2023

Published date

10-01-2010

Foreword
0 Introduction
1 Scope
2 Normative references
3 Definitions
    3.1 Moulding
    3.2 Coremaking
    3.3 Associated equipment
    3.4 Knock-out equipment
    3.5 Modes of operation
4 Hazards
5 Safety requirements and measures
    5.1 General
    5.2 Conditioning and reclamation equipment
    5.3 Moulding machinery and plants
    5.4 Coremaking machinery and plants
    5.5 Knock-out equipment
    5.6 Handling of machines and heavy component parts
          for maintenance and repair
    5.7 Fire/explosion when coating moulds and cores
    5.8 Maintenance and setting activities
6 Verification of the safety requirements and preventative
    measures according to clause 5
    6.1 Safety systems
    6.2 Electrical safety
    6.3 Pressure release of dust explosions
    6.4 Explosiveness of coal dust or coal dust substitutes
    6.5 Stress analysis
    6.6 Airborne substances generated during operation
    6.7 Noise
    6.8 Vibration
    6.9 Safety marking
7 Information for use
    7.1 Marking
    7.2 Technical data and description for safety
    7.3 Operation manual
    7.4 Maintenance manual
Annexes
A (normative) Examples of solutions for 3.8 of EN 292-2
B (informative) Main components of hazardous gases and
    fumes during the application of moulding material
    binders and coatings for cores and moulds
C (normative) Hazardous areas and corresponding
    preventative measures
ZA (informative) Clauses of this European Standard addressing
    essential requirements or other provisions of EU
    Directives

Defines safety requirements to be met by the manufacturer for machines and plant used in foundries for the production of castings in disposable models.

DocumentType
Standard
Pages
60
ProductNote
NEW CHILD COR 1 2012 IS NOW ADDED
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy
Supersedes

EN 1539:2015 Dryers and ovens, in which flammable substances are released - Safety requirements
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 1093-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
EN 14253:2003+A1:2007 Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance
EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment
EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
DIN 4844-1:2012-06 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: OBSERVATION DISTANCES AND COLORIMETRIC AND PHOTOMETRIC REQUIREMENTS
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
EN 574:1996+A1:2008 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
ISO 6184-1:1985 Explosion protection systems Part 1: Determination of explosion indices of combustible dusts in air
EN 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
ISO 11064-1:2000 Ergonomic design of control centres Part 1: Principles for the design of control centres
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN ISO 11064-1:2000 Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
US$172.83
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.