DIN EN ISO 10931:2015-11
Current
The latest, up-to-date edition.
PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015)
Hardcopy , PDF
German, English
11-01-2015
This standard is included in DIN Handbook 190.
Committee |
TC 155
|
DocumentType |
Standard
|
Pages |
43
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ISO 10931:2005 | Identical |
NF EN ISO 10931 : 2006 AMD 1 2015 | Identical |
NBN EN ISO 10931 : 2006 AMD 1 2015 | Identical |
NEN EN ISO 10931 : 2005 AMD 1 2015 | Identical |
NS EN ISO 10931 : 2005 | Identical |
I.S. EN ISO 10931:2006 | Identical |
SN EN ISO 10931 : 2006 AMD 1 2015 | Identical |
UNI EN ISO 10931 : 2006 | Identical |
BS EN ISO 10931 : 2005 | Identical |
UNE-EN ISO 10931:2006 | Identical |
EN ISO 10931:2005/A1:2015 | Identical |
VDI 2083 Blatt 13.3:2010-10 | Cleanroom technology - Quality, production, and distribution of ultrapure water - Pharmacy and other life-science applications |
VDI 2083 Blatt 13.2:2009-01 | Cleanroom technology - Quality, production and distribution of ultrapure water - Microelectronics and other technical applications |
VDI 2083 Blatt 13.1:2009-01 | Cleanroom technology - Quality, production and distribution of ultrapure water - Fundamentals |
DIN HDBK 190 : 3ED 2006 | ROHRE, ROHRLEITUNGSTEILE UND ROHRVERBINDUNGEN AUS THERMOPLASTISCHEN KUNSTSTOFFEN |
ISO 15493:2003 | Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series |
ISO 16135:2006 | Industrial valves Ball valves of thermoplastics materials |
ISO/TR 10358:1993 | Plastics pipes and fittings Combined chemical-resistance classification table |
ISO 10241:1992 | International terminology standards Preparation and layout |
ISO 2507-2:1995 | Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes |
ISO 15494:2015 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |
DIN 8078:2008-09 | POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - GENERAL QUALITY REQUIREMENTS AND TESTING |
ISO 265-1:1988 | Pipes and fittings of plastics materials Fittings for domestic and industrial waste pipes Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U) |
ISO 2507-1:1995 | Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method |
DIN 8075:2011-12 | POLYETHYLENE (PE) PIPES - PE 80, PE 100 - GENERAL QUALITY REQUIREMENTS, TESTING |
DIN ISO 228-1:1994-12 | PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 1: DIMENSIONS, TOLERANCES AND DESIGNATION |
ISO 9080:2012 | Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
ISO 3:1973 | Preferred numbers Series of preferred numbers |
DIN 8061:2016-05 | UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES - GENERAL QUALITY REQUIREMENTS, TESTING |
DIN 2999-1:1983-07 | PIPE THREADS FOR TUBES AND FITTINGS - PARALLEL INTERNAL THREAD AND TAPER EXTERNAL THREAD - TREAD DIMENSIONS |
IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
ISO 12092:2000 | Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure Resistance to internal pressure Test method |
EN 1778:1999 | Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment |
ISO 15853:1999 | Thermoplastics materials Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding |
ISO 3126:2005 | Plastics piping systems Plastics components Determination of dimensions |
ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
ISO 472:2013 | Plastics Vocabulary |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
DIN 53765:1994-03 | TESTING OF PLASTICS AND ELASTOMERS - THERMAL ANALYSIS - DSC-METHOD |
ISO 2505-1:1994 | Thermoplastics pipes Longitudinal reversion Part 1: Determination methods |
ISO 16138:2006 | Industrial valves Diaphragm valves of thermoplastics materials |
ISO 1183-2:2004 | Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
ISO 16137:2006 | Industrial valves Check valves of thermoplastics materials |
ISO 9631:2003 | Rubber seals Joint rings for pipelines for hot-water supply up to 110 degrees C Specification for the material |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
ISO 16136:2006 | Industrial valves Butterfly valves of thermoplastics materials |
ISO/TR 16913:1999 | Plastics pipes and fittings — Definitions of types of test |
ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
ISO 16139:2006 | Industrial valves Gate valves of thermoplastics materials |
ISO 21787:2006 | Industrial valves Globe valves of thermoplastics materials |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
DIN 19531:1987-11 | UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) SOCKET PIPES AND FITTINGS FOR DISCHARGE SYSTEMS INSIDE BUILDINGS - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.