DIN EN ISO 3672-2 E : 2002
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2002
Foreword
Introduction
1 Scope
2 Normative references
3 Preparation of test specimens
3.1 General
3.2 Pre-treatment of materials
3.3 Preparation of the sheets
3.4 Cutting out test specimens
4 Conditioning of test specimens
5 Determination of properties
Specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of unsaturated-polyester resins.
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
SN EN ISO 3672-2 : 2001 | Identical |
NEN EN ISO 3672-2 : 2001 | Identical |
UNI EN ISO 3672-2 : 2003 | Identical |
I.S. EN ISO 3672-2:2002 | Identical |
ISO 3672-2:2000 | Identical |
BS EN ISO 3672-2:2001 | Identical |
NBN EN ISO 3672-2 : 2001 | Identical |
EN ISO 3672-2 : 2001 | Identical |
NF EN ISO 3672-2 : 2002 | Identical |
UNE-EN ISO 3672-2:2002 | Identical |
NS EN ISO 3672-2 : 1ED 2001 | Identical |
IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
IEC 60695-11-20:2015 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
ISO 6603-2:2000 | Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
ISO 2535:2001 | Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature |
DIN EN ISO 604 E : 2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
ISO 2114:2000 | Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value |
ISO 3521:1997 | Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage |
ISO 3167:2014 | Plastics Multipurpose test specimens |
IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
DIN IEC 60093 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
ISO 14848:1998 | Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C |
EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
ISO 6271:2015 | Clear liquids Estimation of colour by the platinum-cobalt colour scale |
ISO 10350-1:2017 | Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials |
DIN EN 60243-1 : 2014 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
ISO 3672-1:2000 | Plastics Unsaturated-polyester resins (UP-R) Part 1: Designation system |
DIN EN 60695-11-20 : 2016 | FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS (IEC 60695-11-20:2015 + COR1:2016) |
DIN EN ISO 178 E : 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013) |
ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
ISO 4615:1979 | Plastics Unsaturated polyesters and epoxide resins Determination of total chlorine content |
IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
DIN EN ISO 3672-1 E : 2002 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 1: DESIGNATION SYSTEM |
ISO 4630:2015 | Clear liquids Estimation of colour by the Gardner colour scale |
IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 2554:1997 | Plastics — Unsaturated polyester resins — Determination of hydroxyl value |
ISO 2577:2007 | Plastics Thermosetting moulding materials Determination of shrinkage |
ISO 1675:1985 | Plastics — Liquid resins — Determination of density by the pyknometer method |
DIN ISO 4630 E : 1999 | BINDERS FOR PAINTS AND VARNISHES - ESTIMATION OF COLOUR OF CLEAR LIQUIDS BY THE GARDNER COLOUR SCALE |
DIN EN ISO 291 E : 2008 | PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
ISO 604:2002 | Plastics — Determination of compressive properties |
DIN EN ISO 4589-2 E : 2006 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 62:2008 | Plastics Determination of water absorption |
DIN EN ISO 62:2008-05 | PLASTICS - DETERMINATION OF WATER ABSORPTION |
ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
ISO 4901:2011 | Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
ISO 760:1978 | Determination of water Karl Fischer method (General method) |
ISO 178:2010 | Plastics Determination of flexural properties |
DIN ISO 6271 E : 1999 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE |
DIN EN ISO 6603-2 E : 2002 | DETERMINATION OF MULTIAXIAL IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 2: INSTRUMENTED PUNCTURE TEST |
ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.