DIN HDBK 126 : 5ED 2016
Current
Current
The latest, up-to-date edition.
GLEITLAGER 1 - MASSE, TOLERANZEN, QUALITAETSSICHERUNG, LAGERSCHAEDEN
Published date
01-12-2013
The individual standards included in this DIN Handbook are listed in the Reference Standards fields.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| DIN ISO 7146-2:2015-12 | PLAIN BEARINGS - APPEARANCE AND CHARACTERIZATION OF DAMAGE TO METALLIC HYDRODYNAMIC BEARINGS - PART 2: CAVITATION EROSION AND ITS COUNTERMEASURES (ISO 7146-2:2008) |
| DIN 1498:1965-08 | TENSION BUSH FOR INTERNAL APPLICATION |
| DIN 31690:1990-09 | PEDESTAL PLAIN BEARINGS - BLOCK PLUMMER |
| DIN ISO 3547-5:2015-12 | PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER (ISO 3547-5:2007) |
| DIN EN ISO 286-1:2010-11 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS |
| DIN 7477:1983-12 | PLAIN BEARINGS; BORE RELIEFS FOR THICK-WALLED MULTILAYER PLAIN BEARINGS |
| DIN 31661:1983-12 | PLAIN BEARINGS; TERMS, CHARACTERISTICS AND CAUSES OF CHANGES AND DAMAGES |
| DIN 1495-1:1983-04 | SINTERED METAL PLAIN BEARINGS WHICH MEET SPECIFIC REQUIREMENTS FOR FRACTIONAL AND SUBFRACTIONAL HORSEPOWER ELECTRIC MOTORS - SPHERICAL BEARINGS - DIMENSIONS |
| DIN 31696:1978-02 | PLAIN THRUST BEARINGS; PIVOTED PAD THRUST BEARINGS; FITTINGS DIMENSIONS |
| DIN ISO 3547-4:2015-12 | PLAIN BEARINGS - WRAPPED BUSHES - PART 4: MATERIALS (ISO 3547-4:2006) |
| DIN ISO 3547-1:2015-12 | Plain bearings - Wrapped bushes - Part 1: Dimensions (ISO 3547-1:2006) |
| DIN 31698:1979-04 | PLAIN BEARINGS, FITS |
| DIN 31665:1993-09 | PLAIN BEARINGS - TESTING OF BEARING METALS - RESISTANCE TO CORROSION BY LUBRICANTS AND STATIC CONDITIONS |
| DIN ISO 3547-6:2015-12 | PLAIN BEARINGS - WRAPPED BUSHES - PART 6: CHECKING THE INSIDE DIAMETER (ISO 3547-6:2007) |
| DIN 7473:1983-12 | PLAIN BEARINGS; THICK-WALLED MULTILAYER PLAIN BEARINGS WITH CYLINDRICAL BORE, UNDIVIDED |
| DIN 1850-6:1998-07 | PLAIN BEARINGS - PART 6: THERMOPLASTIC BUSHES |
| DIN 31694:1990-09 | PEDESTAL PLAIN BEARINGS - CENTRE FLANGE BEARINGS |
| DIN ISO 4379:1995-10 | PLAIN BEARINGS - COPPER ALLOY BUSHES |
| DIN 502:2004-09 | Driving Components - Flange bearings - Fastened with two screws |
| DIN 1552-3:2008-06 | BUSHES FOR RAILWAY VEHICLES - PART 3: CONVEX PRESS-FIT BUSHES OF STEEL |
| DIN ISO 3547-3:2015-12 | PLAIN BEARINGS - WRAPPED BUSHES - PART 3: LUBRICATION HOLES, GROOVES AND INDENTATIONS (ISO 3547-3:2006) |
| DIN 503:2004-09 | Driving components - Flange bearings - Fastened with four screws |
| DIN ISO 3547-7:2015-12 | PLAIN BEARINGS - WRAPPED BUSHES - PART 7: MEASUREMENT OF WALL THICKNESS OF THIN-WALLED BUSHES (ISO 3547-7:2007) |
| DIN 8221:2004-09 | Plain bearings - Bushes for plain bearings according to DIN 502, DIN 503 and DIN 504 |
| DIN 1499:1965-08 | TENSION BUSH FOR EXTERNAL APPLICATION |
| DIN ISO 7146-1:2015-12 | Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 1: General (ISO 7146-1:2008) |
| DIN 38:1983-12 | PLAIN BEARINGS - BEARING METAL LINING FOR THICK - WALLED MULTIPLAYER PLAIN BEARINGS |
| DIN 1495-3:1996-03 | SINTERED METAL PLAIN BEARINGS SUBJECT TO SPECIFIC REQUIREMENTS FOR USE IN SMALL-POWER AND FRACTIONAL HORSE-POWER ELECTRIC MOTORS - REQUIREMENTS AND TESTING |
| DIN 1552-2:2008-06 | BUSHES FOR RAILWAY VEHICLES - PART 2: PRESS-FIT BUSHES (PRESSED ON) OF STEEL |
| DIN 7474:1983-12 | PLAIN BEARINGS; THICK-WALLED MULTILAYER PLAIN BEARINGS WITH CYLINDRICAL BORE, DIVIDED |
| DIN 322:1983-12 | PLAIN BEARINGS - LOOSE LUBRICATION RINGS FOR GENERAL PURPOSES |
| DIN 505:2004-09 | DRIVING COMPONENTS - CAP BEARINGS, HALF BEARINGS - FASTENING WITH TWO SCREWS |
| DIN 1552-1:2008-06 | BUSHES FOR RAILWAY VEHICLES - PART 1: PRESS-FIT BUSHES OF STEEL |
| DIN 1850-4:1998-07 | PLAIN BEARINGS - PART 4: ARTIFICIAL CARBON BUSHES |
| DIN 506:2004-09 | DRIVING COMPONENTS - CAP-BEARINGS, HALF BEARINGS - FASTENING WITH FOUR SCREWS |
| DIN ISO 6526:1986-05 | Plain bearings; pressed bimetallic half thrust washers; features and tolerances; identical with ISO 6526, edition 1983 |
| DIN 31693:1990-09 | PEDESTAL PLAIN BEARINGS - SIDE FLANGE BEARING |
| DIN ISO 6525:1986-05 | Plain bearings; ring type thrust washers made from strip; dimensions and tolerances; identical with ISO 6525, edition 1983 |
| DIN 504:2004-09 | DRIVING COMPONENTS - EYE-TYPE BEARINGS |
| DIN 1496:1996-03 | PLAIN BEARINGS - TESTING OF FRICTION AND WEAR OF SINTERED BEARINGS - TESTING IN THE SLPG-TESTER |
| DIN 31697:1978-02 | PLAIN THRUST BEARINGS; RING THRUST BEARINGS; FITTING DIMENSIONS |
| DIN 118-1:1977-07 | DRIVING COMPONENTS - PEDESTAL SLIDE BEARINGS FOR THE MACHINE BUILDING INDUSTRY - DIMENSIONS |
| DIN 1495-2:1983-04 | SINTERED METAL PLAIN BEARINGS WHICH MEET SPECIFIC REQUIREMENTS FOR FRACTIONAL AND SUBFRACTIONAL HORSEPOWER ELECTRIC MOTORS - CYLINDRICAL BEARINGS - DIMENSIONS |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.