DIN HDBK 6 : 14ED 2016
Current
Current
The latest, up-to-date edition.
BOHRER, SENKER, REIBAHLEN, GEWINDEBOHRER, GEWINDESCHNEIDEISEN UND GEWINDEFURCHER
Published date
01-12-2013
The individual standards included in this DIN Handbook are listed in the Reference Standards fields.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| DIN 205:1996-12 | HAND REAMERS FOR METRIC TAPERS |
| DIN ISO 5419:1998-06 | TWIST DRILLS - TERMS, DEFINITIONS AND TYPES |
| DIN 6539:1991-05 | CONTINUOUS PARALLEL SHANK SOLID HARDMETAL TWIST DRILLS; DIMENSIONS |
| DIN 357:2016-02 | MACHINE NUT TAPS FOR COARSE PITCH METRIC ISO-THREADS M3 TO M68 |
| DIN 2172-1:2013-11 | REAMERS - PART 1: TECHNICAL SPECIFICATIONS FOR REAMERS WITH SHANK |
| DIN 2174:2008-11 | COLD-FORMING TAPS FOR ISO METRIC COARSE PITCH THREAD M2 TO M39 AND ISO METRIC FINE PITCH THREAD M3 X 0,25 TO M52 X 4 - DIMENSIONS |
| DIN EN 24230:1990-06 | HAND AND MACHINE-OPERATED CIRCULAR SCREWING DIES FOR TAPER PIPE THREADS, R SERIES |
| DIN EN 24231:1990-06 | HAND AND MACHINE-OPERATED CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS, G SERIES |
| DIN 2181:2015-09 | SETS OF 2 TAPS FOR METRIC FINE ISO-THREADS M1 X 0,2 TO M52 X 4 |
| DIN 1899:2006-11 | MICRO-PRECISION DRILLS |
| DIN 335:2007-12 | COUNTERSINKS 90 DEGREES |
| DIN 8050:1997-06 | MACHINE-REAMERS WITH PARALLEL SHANKS, WITH CARBIDE TIPS, WITH SHORT CUTTING PART |
| DIN 1414-2:1998-06 | Technical specifications for twist drills of high-speed steel - Part 2: Inspection |
| DIN 346:2006-11 | MORSE TAPER SHANK TWIST DRILLS, OVERSIZE SHANK |
| DIN 376:2016-02 | MACHINE SCREWING TAPS FOR COARSE PITCH METRIC ISO-THREADS M1,6 TO M68 |
| DIN 204:1996-12 | HAND REAMERS FOR MORSE TAPERS |
| DIN 40435:2003-07 | MACHINE TAPS FOR THE TAPPED HOLES (EG) FOR WIRE THREAD INSERTS FOR ISO METRIC SCREW THREADS ACCORDING TO DIN 8140 - COARSE PITCH THREADS EG M2 TO EG M52 AND FINE PITCH THREADS EG M8 X 1 TO EG M48 X 3 - DIMENSIONS |
| DIN 8093-1:2013-11 | HARDMETAL MACHINE REAMERS WITH PARALLEL SHANK - PART 1: REAMERS WITH TIPS |
| DIN 8051:1979-09 | Machine-reamers with Morse taper shank, with carbide tips, with short cutting part |
| DIN 2172-2:2007-12 | REAMERS - PART 2: TECHNICAL SPECIFICATIONS FOR SHELL REAMERS |
| DIN 802-3:2016-03 | TOLERANCES ON THE THREADED PORTION OF TAPS - PART 3: GROUND TAPS FOR PIPE THREAD (G) ACCORDING TO DIN EN ISO 228-1 AND PIPE THREAD (RP) ACCORDING TO DIN EN 10226-1 - MANUFACTURING TOLERANCES ON THE THREADED PORTION |
| DIN 212-2:2011-02 | Machine reamers with parallel shanks - Part 2: Stepped shanks |
| DIN 1898-2:2007-05 | TAPER PIN HOLE DRILLS - PART 2: PIN HOLE DRILLS WITH MORSE TAPER SHANK |
| DIN 802-5:1997-02 | TOLERANCES ON THE THREADED PORTION OF TAPE - PART 5: GROUND THREADED TAPS FOR ISO METRIC THREAD; THREADS FOR INTERFERENCE FITS ACCORDING TO DIN 8141-1, COARSE AND FINE PITCHES; MANUFACTURING TOLERANCES ON THE THREADED PORTION |
| DIN 10:2009-12 | SQUARES OF PARALLEL SHANKS FOR ROTATING TOOLS |
| DIN 6540-2:1993-04 | TECHNICAL DELIVERY CONDITIONS FOR SOLID HARDMETAL TWIST DRILLS ACCORDING TO DIN 6537 AND DIN 6539; INSPECTION |
| DIN 6538-1:1993-06 | TWIST DRILLS WITH HARDMETAL CUTTING EDGES WITH REINFORCED PARALLEL SHANK; DIMENSIONS |
| DIN 8037:1971-08 | TWIST DRILLS WITH PARALLEL SHANK WITH CARBIDE TIPS FOR DRILLING METAL |
| DIN 2175-1:2015-03 | COLD-FORMING TAPS - PART 1: TECHNICAL DELIVERY CONDITIONS FOR HIGH-SPEED STEEL COLD-FORMING TAPS |
| DIN 1867:2007-12 | COUNTERSINKS 90 DEGREE, WITH MORSE TAPER SHANK AND DETACHABLE PILOT |
| DIN 338:2006-11 | Parallel shank twist drills, jobber series |
| DIN 6540-1:1993-04 | TECHNICAL DELIVERY CONDITIONS FOR SOLID HARDMETAL TWIST DRILLS ACCORDING TO DIN 6537 AND DIN 6539; REQUIREMENTS |
| DIN 382:2009-12 | HEXAGONAL DIE - NUTS |
| DIN 8094:1979-09 | MACHINE-REAMERS WITH MORSE TAPER SHANK, WITH CARBIDE TIPS, WITH LONG CUTTING PART |
| DIN ISO 513:2014-05 | Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application (ISO 513:2012) |
| DIN 9:1996-12 | HAND TAPER PIN REAMERS |
| DIN 375:2007-12 | COUNTERBORES WITH MORSE TAPER SHANK AND DETACHABLE PILOT |
| DIN 8011:2007-12 | CARBIDE TIPS FOR REAMERS, COUNTERBORES AND SHANK-TYPE CUTTERS |
| DIN 206:2008-03 | HAND REAMERS |
| DIN 40433:2008-11 | MACHINE TAPS FOR STEEL CONDUIT THREAD PG 7 TO PG 48 |
| DIN 2184-1:2015-02 | TAPS AND COLD FORMING TAPS - PART 1: LONG TYPE; GENERAL PLAN OF DIMENSIONS |
| DIN 138:2003-04 | METAL - CUTTING TOOLS - BORES, KEYWAYS AND DRIVING FEATURES FOR TOOLS WITH PARALLEL BORE AND 1 IN 30 TAPER BORE |
| DIN 1866:2007-12 | COUNTERSINKS 90 DEGREE, WITH PARALLEL SHANK SOLID PILOT |
| DIN 339:2006-11 | Parallel shank twist drills for use in jig bushes |
| DIN EN 25968:1990-07 | CIRCULAR SCREWING DIES; TERMINOLOGY |
| DIN 334:2007-12 | COUNTERSINKS 60 DEGREES |
| DIN 336:2003-07 | DIAMETERS OF DRILLS FOR MINOR DIAMETERS OF TAPPED THREADS |
| DIN 2197-2:2015-03 | SCREWING TAPS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR GROUND CARBIDE TAPS |
| DIN 1414-1:2006-11 | TECHNICAL SPECIFICATIONS FOR TWIST DRILLS OF HIGH-SPEED STEEL - PART 1: REQUIREMENTS |
| DIN 371:2016-01 | MACHINE TAPS WITH REINFORCED SHANK FOR COARSE PITCH METRIC ISO-THREADS M1 TO M10 AND FINE PITCH METRIC ISO-THREADS M1 X 0,2 TO M10 X 1,25 |
| DIN 222:1981-10 | SHELL DRILLS |
| DIN 1412:2001-03 | Twist drills made of high-speed steel - Shapes of points |
| DIN 8043:2007-12 | CORE DRILLS WITH CARBIDE TIPS |
| DIN 345:2006-11 | MORSE TAPER SHANK TWIST DRILLS |
| DIN 2173:2008-03 | COUNTERSINKS AND COUNTERBORES, TOOLS WITH PILOT AND SHANK - TECHNICAL SPECIFICATIONS |
| DIN 2189:2008-11 | COLD-FORMING TAPS FOR PIPE THREADS G1/16 TO G1 - DIMENSIONS |
| DIN 1897:2006-11 | PARALLEL SHANK TWIST DRILLS, STUB SERIES |
| DIN 2175-2:2015-03 | COLD-FORMING TAPS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR CARBIDE COLD-FORMING TAPS |
| DIN 6537:1993-04 | SOLID-HARDMETAL TWIST DRILLS WITH STEPPED PARALLEL SHANK; DIMENSIONS |
| DIN 374:2016-01 | MACHINE SCREWING TAPS FOR FINE PITCH METRIC ISO-THREADS M3 X 0,2 TO M52 X 4 |
| DIN 2184-2:2003-12 | TAPS AND COLD FORMING TAPS - PART 2: SHORT TYPE - GENERAL PLAN OF DIMENSIONS |
| DIN 802-4:2012-01 | Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion |
| DIN EN 25967:1990-07 | TAPS FOR THREAD CUTTING; NOMENCLATURE OF THE MAIN TYPES AND TERMINOLOGY |
| DIN 341:2006-11 | MORSE TAPER SHANK TWIST DRILLS FOR USE IN JIG BUSHES, LONG SERIES |
| DIN 5156:2008-11 | MACHINE TAPS FOR PIPE THREADS G 1/16 TO G 2 AND RP 1/16 TO RP 2 |
| DIN 1869:2006-11 | PARALLEL SHANK TWIST DRILLS, EXTRA LONG SERIES |
| DIN 2197-1:2015-03 | SCREWING TAPS - PART 1: TECHNICAL DELIVERY CONDITIONS FOR GROUND HIGH-SPEED STEEL TAPS |
| DIN 1870:2006-11 | MORSE TAPER SHANK TWIST DRILLS, EXTRA LONG SERIES |
| DIN 8379:2006-11 | SUBLAND TWIST DRILLS WITH MORSE TAPER SHANKS FOR HOLES PRIOR TO TAPPING SCREW THREADS |
| DIN 311:1975-03 | BRIDGE REAMERS WITH MORSE TAPER SHANK |
| DIN 1898-1:2007-05 | TAPER PIN HOLE DRILLS - PART 1: PIN HOLE DRILLS WITH PARALLEL SHANK |
| DIN 347:1962-03 | COUNTERSINKS WITH 120 DEGREES POINT ANGLE |
| DIN EN ISO 4957:2001-02 | TOOL STEELS |
| DIN 352:2016-01 | SETS OF TAPS - SETS OF 3 TAPS FOR METRIC COARSE ISO-THREADS M1 TO M68 |
| DIN 1895:2007-05 | MACHINE REAMERS FOR MORSE TAPERS |
| DIN ISO 11054:2006-09 | Cutting tools - Designation of high-speed steel groups (ISO 11054:2006) |
| DIN 8093-2:2013-11 | HARDMETAL MACHINE REAMERS WITH PARALLEL SHANK - PART 2: NC-REAMERS |
| DIN 859:2007-12 | HAND REAMERS WITH PARALLEL SHANK - ADJUSTABLE, SLOTTED |
| DIN 802-6:2003-07 | TOLERANCES ON THE THREADED PORTION OF TAPS - PART 6: GROUND TAPS FOR TAPPED HOLES (EG) FOR WIRE THREAD INSERTS ACCORDING TO DIN 8140 FOR ISO METRIC COARSE AND FINE PITCH THREADS - MANUFACTURING TOLERANCES ON THE THREADED PORTION |
| DIN 340:2006-11 | Parallel shank twist drills, long series |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.