DIN IEC 60359:1993-09
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
09-01-2002
01-12-2013
Vorwort
Einleitung
Einführung
Hauptabschnitt 1: Allgemeine Grundlagen
1 Anwendungsbereich
2 Zweck
3 Grössen, Grössenwerte und Bereiche, die
anzugeben und zu messen sind
Hauptabschnitt 2: Begriffe
4 Begriffe
Hauptabschnitt 3: Festlegen technischer Daten
5 Festlegen von Werten und (Bereichen
6 Anforderungen an IEC-Produktnormen
7 Festlegen von Grenzwerten der Messabweichungen
8 Wahl von Einflussgrössen
Hauptabschnitt 4: Vorgehen bei Abnahmeprüfungen
9 Allgemeine Regeln
10 Messen von Eigenabweichung und Einflusseffekten
11 Bestätigung der Übereinstimmung mit festgelegten
Grenzwerten der Messabweichungen
12 Prüfung auf Beschädigung durch Umwelteinflüsse
13 Berücksichtigung des Einflusses der Prüfeinrichtung
14 Bedingungen für den Prüfling
15 Referenzbedingungen
Anhang A Statistische Berechnung der
Betriebsmessabweichung
Anhang B Anforderungen an die Umweltbedingungen
aus der ersten Ausgabe der Publikation IEC 359
Applies to the specification of the performance of the electrical and electronic equipment and instruments and the accessories used with them which measure electrical quantities (indicating and recording instruments), or supply measured electrical quantities (supply instruments), such as signal generators and some power supplies, or measure non-electrical quantities using electrical means, excluding any parts, such as transducers. The expression of performance covers only the electrical or electronic part. This standard provides methods for ensuring uniformity in the specification and measurement of errors of the above equipment.
| DevelopmentNote |
Supersedes DIN 43745 (07/2002)
|
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IEC 60359:2001 | Identical |
| DIN EN 61187:1995-06 | ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION |
| VDE 0418-20 : 1996 | ELECTRIC INTEGRATING METERS - ALTERNATING CURRENT STATIC VARHOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3) |
| VDE 0418-8 : 1994 | ALTERNATING-CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2 S AND 0.5 S) |
| DIN EN 60687 : 1994 | ALTERNATING-CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2 S AND 0.5 S) |
| DIN EN 61557-1 : 2007 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS |
| VDE 0418-7 : 2001 | ALTERNATING CURRENT ELECTRONIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| DIN EN 61268 : 1996 | ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3) |
| DIN IEC 60721-3-2:1987-08 | ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; TRANSPORTATION |
| DIN IEC 60721-3-7:1989-09 | ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES |
| IEC 60050-131:2002 | International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory |
| IEC 60654-4:1987 | Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences |
| IEC 60555-1:1982 | Disturbances in supply systems caused by household appliances and similar electrical equipment. Part 1: Definitions. |
| DIN IEC 60688-1:1990-11 | ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING A.C. ELECTRICAL QUANTITIES INTO D.C. ELECTRICAL QUANTITIES - GENERAL PURPOSES TRANSDUCERS |
| DIN EN 60051-3:1991-11 | Direct acting indicating analogue electrical measuring instruments and their accessories; part 3: special requirements for wattmeters and varmeters (IEC 60051-3:1984, edition 4); german version EN 60051-3:1989 |
| DIN 43780:1976-08 | ELECTRICAL MEASURING INSTRUMENTS - DIRECT ACTING INDICATING ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES |
| DIN IEC 60721-3-5:1988-04 | ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; GROUND VEHICLE INSTALLATIONS |
| IEC 60160:1963 | Standard atmospheric conditions for test purposes |
| DIN 43750:1974-11 | DOCUMENTATION TO BE SUPPLIED WITH ELECTRONIC MEASURING APPARATUS |
| DIN IEC 60654-3:1985-09 | OPERATING CONDITIONS FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT; MECHANICAL INFLUENCES |
| DIN 40050:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| DIN IEC 60654-2:1995-01 | OPERATING CONDITIONS FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT; POWER |
| IEC 60688:2012 | Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals |
| DIN VDE 0838-1 : 1987 | DISTURBANCES IN SUPPLY SYSTEMS CAUSED BY HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL EQUIPMENT; PART 1: DEFINITIONS |
| DIN IEC 60654-1:1984-01 | OPERATING CONDITIONS FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT; TEMPERATURE, HUMIDITY AND BAROMETRIC PRESSURE |
| DIN 40053-4:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, JET NOZZLE |
| DIN IEC 60721-3-1:1990-04 | ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; STORAGE |
| DIN 40200:1981-10 | NOMINAL VALUE, LIMITING VALUE, RATED VALUE, RATING - CONCEPTS |
| DIN EN 60051-7:1991-11 | DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES; PART 7: SPECIAL REQUIREMENTS FOR MULTI-FUNCTION INSTRUMENTS |
| IEC 60484:1974 | Indirect acting electrical measuring instruments |
| DIN IEC 60721-3-6:1990-06 | ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; SHIP ENVIRONMENT |
| DIN EN 60051-1 : 1999 | DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS (IEC 60051-1:2016) |
| DIN IEC 60721-3-4:1989-10 | ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS |
| DIN EN 60051-8:1991-11 | DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES; PART 8: SPECIAL REQUIREMENTS FOR ACCESSORIES |
| DIN EN 60051-5:1991-11 | DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES; PART 5: SPECIAL REQUIREMENTS FOR PHASE METERS, POWER FACTOR METERS AND SYNCHROSCOPES |
| DIN IEC 60654-4:1990-12 | OPERATING CONDITIONS FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT; CORROSIVE AND EROSIVE INFLUENCES |
| DIN EN 60051-2:1991-11 | Direct acting indicating analogue electrical measuring instruments and their accessories; part 2: special requirements for ammeters and voltmeters (IEC 60051-2:1984, edition 4); german version EN 60051-2:1989 |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| DIN 43782:1977-05 | INDIRECT ACTING ELECTRICAL MEASURING INSTRUMENTS - GENERAL REQUIREMENTS |
| DIN 40050-9:1993-05 | ROAD VEHICLES; DEGREES OF PROTECTION (IP-CODE); PROTECTION AGAINST FOREIGN OBJECTS, WATER AND CONTACT; ELECTRICAL EQUIPMENT |
| DIN EN 60051-4:1991-11 | Direct acting indicating analogue electrical measuring instruments and their accessories; part 4: special requirements for frequency meters (IEC 60051-4:1984, edition 4); german version EN 60051-4:1989 |
| IEC 60051:1973 | Recommendations for direct acting indicating electrical measuring instruments and their accessories |
| DIN IEC 60721-3-3:1990-04 | ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; STATIONARY USE AT WEATHER PROTECTED LOCATIONS |
| DIN 40050-10:1975-02 | DEGREES OF PROTECTION OF ENCLOSURES; PROTECTION OF PERSONS AGAINST CONTACT WITH LIVE PARTS, PROTECTION OF EQUIPMENT AGAINST INGRESS OF SOLID FOREIGN BODIES & OF WATER, SMALL TRANSFORMERS TILL 16 KVA |
| DIN 40053-1:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, DRIPPING APPARATUS |
| DIN 40053-2:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, OSCILLATING TUBE |
| IEC 60654-1:1993 | Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions |
| DIN IEC 60721-3-0:1987-08 | ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES; INTRODUCTION AND GUIDE FOR USERS |
| DIN EN 60688:2013-08 | ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING A.C. AND D.C. ELECTRICAL QUANTITIES TO ANALOGUE OR DIGITAL SIGNALS (IEC 60688:2012) |
| DIN 40053-3:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, SPRAY NOZZLE |
| DIN EN 60051-6:1991-11 | DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES; PART 6: SPECIAL REQUIREMENTS FOR OHMMETERS (IMPEDANCE METERS) AND CONDUCTANCE METERS |
| DIN EN 60051-9:1991-11 | Direct acting indicating analogue electrical measuring instruments and their accessories; part 9: recommended test methods (IEC 60051-9:1988, edition 4); german version EN 60051-9:1989 |
| IEC 60654-3:1983 | Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.