DIN ISO 1302:1993-12
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TECHNICAL DRAWINGS - METHOD OF INDICATING SURFACE TEXTURE
Superseded date
06-01-2002
Published date
01-12-2013
Kein Inhaltsverzeichnis in der Norm vorhanden.
This standard is included in DIN Handbook 123, 303 and 304. Specifies the symbols and additional indications of surface texture to be indicated on technical drawings. The basic symbol for surface texture consists of two legs of unequal length inclined at approximately 60 Degrees to the line representing the considered surface. A bar added to the basic symbol means that the removal of material by machining is required. A circle added to the basic symbol means that removal of the material is not permitted.
| DevelopmentNote |
Supersedes DIN 3142 (07/2002)
|
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 1302:2002 | Identical |
| DIN 14307-2:1986-11 | ALUMINIUM ALLOY SOLID COUPLING TYPE C, WITH SEALING RING FOR SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| DIN ISO 8062:1998-08 | CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES |
| DIN 506:2004-09 | DRIVING COMPONENTS - CAP-BEARINGS, HALF BEARINGS - FASTENING WITH FOUR SCREWS |
| DIN VDE 0472-629 : 1985 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS - RESISTANCE TO HEAT OF TEXTILE BRAIDS |
| DIN 15401-2:1983-09 | LIFTING HOOKS FOR LIFTING APPLIANCES - SINGLE HOOKS - FINISHED PARTS WITH THREADED SHANK |
| DIN 3966-2:1978-08 | INFORMATION ON GEAR TEETH IN DRAWINGS - INFORMATION ON STRAIGHT BEVEL GEAR TEETH |
| DIN 15062-2:1982-07 | CRANES; SHEAVES FOR WIRE ROPES; DIMENSIONS FOR HUBS AND BEARINGS |
| DIN 1680-1:1980-10 | ROUGH CASTINGS; GENERAL TOLERANCES AND MACHINING ALLOWANCES, GENERAL |
| DIN 15414:1983-08 | BOTTOM HOOK BLOCKS, NUT LECKING DEVICES FOR CRANES |
| DIN 14308-2:1986-11 | ALUMINIUM ALLOY SOLID COUPLING TYPE B, WITH SEALING RING FOR SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| DIN 406-11 Beiblatt 1:2000-12 | TECHNICAL DRAWINGS - DIMENSIONING - PART 11: RULES FOR THE APPLICATION; INITIAL TREATMENT OF BLANKS |
| DIN 14322:1989-09 | Aluminium alloy suction coupling type B; nominal pressure 16 |
| DIN 7631:1985-01 | Compression couplings with spherical liner; straight compression couplings |
| DIN 14302:1985-04 | Aluminium alloy delivery coupling type C; nominal pressure 16 |
| DIN 28125-3:1989-04 | HINGED COVERS - CIRCULAR SHAPE WITH PROTECTION RING AND SURFACE COATED - DN 500 AND DN 600 |
| DIN 504:2004-09 | DRIVING COMPONENTS - EYE-TYPE BEARINGS |
| DIN 505:2004-09 | DRIVING COMPONENTS - CAP BEARINGS, HALF BEARINGS - FASTENING WITH TWO SCREWS |
| DIN 14330-2:1985-04 | ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16, USED FOR FIRE HOSES S 32 |
| DIN 40686-1:1983-08 | SURFACES OF DENSE CERAMIC COMPONENTS FOR ELECTRICAL ENGINEERING; DEFINITIONS |
| DIN 50115:1991-04 | TESTING OF METALLIC MATERIALS; NOTCHED BAR IMPACT TEST; SPECIAL FORMS OF TEST PIECES AND METHODS OF EVALUATION |
| DIN ISO 128-22:1999-11 | Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999) |
| DIN ISO 4379:1995-10 | PLAIN BEARINGS - COPPER ALLOY BUSHES |
| DIN 28125-1:1989-08 | DN 150 TO DN 600 ROUND HINGED CLOSURES |
| DIN 820-24:1986-11 | STANDARDIZATION; PRESENTATION OF STANDARDS; FIGURES AND TABLES |
| DIN 7632:1985-01 | Compression couplings with spherical liner; reducers |
| DIN 14310:1986-11 | Aluminium alloy cap fire hose coupling typ D for pressure and suction purposes; nominal pressure 16 |
| DIN 28125-2:1989-04 | HINGED COVERS - ELLIPTICAL, 350 MM X 450 MM |
| DIN 15418-2:1982-07 | CRANES; BOTTOM BLOCKS; SPACER SLEEVES FOR TYPE C ROPE PULLEYS WITH DEEP GROOVE BALL BEARING, WITHOUT INTERNAL SLEEVE |
| DIN EN 22553:1997-03 | WELDED, BRAZED AND SOLDERED JOINTS - SYMBOLIC REPRESENTATION ON DRAWINGS |
| DIN 15092:1982-07 | CRANES; DRIVING WHEEL UNITS AND IDLER WHEEL UNITS; SEALING COVERS |
| DIN 15418-3:1982-07 | CRANES; BOTTOM BLOCKS; SEALING COVERS FOR TYPE C ROPE PULLEYS WITH DEEP GROOVE BALL BEARING, WITHOUT INTERNAL SLEEVE |
| VDI 3357:2014-01 | Sliding elements in large stamping dies |
| DIN 503:2004-09 | Driving components - Flange bearings - Fastened with four screws |
| DIN 1912-3 : 1982 | SYMBOLIC REPRESENTATION OF WELDED, SOLDERED AND BRAZED JOINTS ON DRAWINGS - SURFACING |
| DIN 15421-3:1982-07 | CRANES; BOTTOM BLOCKS; SEALING COVERS FOR TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
| DIN 51224:1985-01 | MATERIALS TESTING MACHINES; HARDNESS TESTING MACHINES WITH A DEPTH-MEASURING DEVICE |
| DIN 15421-1:1982-07 | CRANES; BOTTOM BLOCKS; TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
| DIN 14319:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE A WITH METALLIC SEALING AREA AND WITH CAST IRON OR WITH ALUMINIUM ALLOY COVER, TYPE A - NOMINAL PRESSURE 16 |
| DIN 49441-3:1989-12 | TWO-POLE PLUGS WITH EARTHING CONTACT RATED FOR 10 A 250 V A.C.; 16 A 250 V D.C.; GAUGES FOR CHECKING THE OUTSIDE DIAMETER OF PLUGS; TEST APPARATUS |
| BWB TL 4320-0025 : 2ED 1997 | FUEL PUMPING SYSTEM, 400 L/MIN |
| DIN ISO 6621-2:1990-06 | INTERNAL COMBUSTION ENGINES; PISTON RINGS; INSPECTION MEASURING PRINCIPLES |
| DIN 1850-6:1998-07 | PLAIN BEARINGS - PART 6: THERMOPLASTIC BUSHES |
| DIN 14307-1:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE C WITH SEALING RING FOR PRESSURE PURPOSES - NOMINAL PRESSURE 16 |
| DIN 28125 Beiblatt 1:1989-04 | Hinged covers; example for construction of a lifting aid |
| DIN 8542:1983-09 | HOSE CONNECTIONS AND COUPLERS FOR EQUIPMENT FOR WELDING, CUTTING AND ALLIED PROCESSES |
| DIN EN ISO 4288:1998-04 | GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| DIN 14313:1989-09 | Aluminium alloy cap fire hose coupling type A for pressure and suction purposes; nominale pressure 16 |
| DIN 50191:1987-09 | HARDENABILITY TEST BY END QUENCHING |
| DIN 28126:1989-04 | DN 125 BOW CLOSURES FOR PROCESS EQUIPMENT |
| DIN 15062-1:1982-07 | CRANES; SHEAVES FOR WIRE ROPES; SELECTED RANGES AND ASSOCIATION OF DIAMETERS AND OVERALL BREADTH DIMENSIONS |
| DIN 14318:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE B WITH METALLIC SEALING AREA AND WITH CAST IRON COVER OR WITH ALUMINIUM ALLOY COVER, TYPE B - NOMINAL PRESSURE 16 |
| DIN 14330-1:1985-04 | ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16, USED FOR FIRE HOSES S 28 |
| DIN 14321:1985-04 | Aluminium alloy suction coupling type C; nominal pressure 16 |
| DIN 14311:1985-04 | Aluminium alloy cap fire hose coupling type C, for pressure and suction purposes; nominal pressure 16 |
| DIN 18469:1988-05 | UNPLASTICIZED POLYVINYL CHLORIDE EAVES GUTTERS - REQUIREMENTS, TESTING |
| VDE 0472-629 : 1985 | TESTING OF CABLES, WIRES & FLEXIBLE CORDS - RESISTANCE TO HEAT OF TEXTILE BRAIDS |
| DIN 15421-2:1982-07 | CRANES; BOTTOM BLOCKS; INTERNAL SLEEVES AND SPACER SLEEVES FOR TYPE B ROPE PULLEYS WITH DEEP GROOVE BALL BEARING AND INTERNAL SLEEVE |
| DIN 810:1986-11 | MACHINE TOOLS; PRESSES; SLIDE HOLES FOR SHANKS OF PRESS TOOLS; DIMENSIONS |
| DIN 49525-2:1979-03 | D-TYPE, FUSE-CARRIERS D 01, D 02, D 03, 380 V; GAUGES |
| DIN 14323:1985-04 | Aluminium alloy delivery and suction coupling type A; nominal pressure 16 |
| DIN 71803:1988-07 | ANGLE JOINTS WITH SCREW STUDS - WITH RIVET STUDS |
| DIN 14312:1985-04 | Aluminium alloy cap fire hose coupling type B, for pressure and suction purposes; nominal pressure 16 |
| DIN 14309:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE A WITH SEALING RING FOR PRESSURE AND SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| DIN 14308-1:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE B WITH SEALING RING FOR PRESSURE PURPOSES - NOMINAL PRESSURE 16 |
| DIN ISO 9939:1995-12 | AEROSPACE - PRESSURE RE-OILING CONNECTION (NEW TYPE) |
| DIN 14306:1986-11 | ALUMINIUM ALLOY SOLID COUPLING TYPE D FOR PRESSURE AND SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| DIN 50141:1982-01 | TESTING OF METALLIC MATERIALS; SHEARING TEST |
| DIN 71752:1994-04 | FORK JOINTS - YOKES |
| FDBR 2-1 : 1997 | |
| DIN 14301:1985-04 | Aluminium alloy delivery and suction coupling type D; nominal pressure |
| DIN 14317:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE C WITH METALLIC SEALING AREA AND WITH CAST IRON COVER OR WITH ALUMINIUM ALLOY COVER, TYPE C - NOMINAL PRESSURE 16 |
| DIN 3761-8:1984-01 | ROTARY SHAFT LIP TYPE SEALS FOR AUTOMOBILES; TEST; CARRYING OUT AXLE SECTIONS |
| DIN 14332:1986-11 | Aluminium alloy delivery coupling type C; nominal pressure 16; used for fire hoses C 42 |
| DIN 3237-1:1994-10 | STRAIGHT PATTERN VALVES WITH FLANGE SOCKET IN MAIN POWER CONNECTION - PART 1: WITHOUT LINING |
| DIN 502:2004-09 | Driving Components - Flange bearings - Fastened with two screws |
| DIN 55211:1980-03 | MACHINE TOOLS - BEADING MACHINES WITH SWIVELING TOP SHAFT - SIZES |
| DIN 55212:1980-03 | MACHINE TOOLS - BEADING MACHINES WITH PARALLEL ADJUSTABLE TOP SHAFT - SIZES |
| DIN 3966-1:1978-08 | INFORMATION ON GEAR TEETH IN DRAWINGS; INFORMATION ON INVOLUTE TEETH FOR CYLINDRICAL GEARS |
| DIN 4762:1989-01 | SURFACE ROUGHNESS; TERMINOLOGY; SURFACE & ITS PARAMETERS |
| DIN ISO 3461-2:1988-03 | GRAPHICAL SYMBOLS - GENERAL PRINCIPLES FOR THE CREATION OF GRAPHICAL SYMBOLS - GRAPHICAL SYMBOLS FOR USE IN TECHNICAL PRODUCT DOCUMENTATION |
| DIN 6776-1:1976-04 | TECHNICAL DRAWINGS; LETTERING, CHARACTERS |
| DIN 4766-1:1981-03 | MANUFACTURING METHODS OF SURFACE ROUGHNESS; ATTAINABLE MEAN VALUE OF MAXIMUM HEIGHT OF THE PROFILE R[Z] ACCORDING TO DIN 4768 PART 1 |
| DIN 4763:1981-03 | PROGRESSIVE RATIO OF NUMBER VALUES OF SURFACE ROUGHNESS PARAMETERS |
| ISO 468:1982 | Surface roughness — Parameters, their values and general rules for specifying requirements |
| ISO 3461-2:1987 | General principles for the creation of graphical symbols — Part 2: Graphical symbols for use in technical product documentation |
| DIN 4776 Beiblatt 1:1990-05 | MEASUREMENT OF SURFACE ROUGHNESS; PARAMETERS Rk, Rpk, Rvk, Mr1, Mr2 FOR DESCRIPTION OF MATERIAL PORTION (PROFILE BEARING LENGTH RATIO) IN ROUGHNESS PROFILE; MEASURING CONDITIONS AND EVALUATION PROCEDURES |
| DIN 199-2:1977-12 | CONCEPTS FOR DRAWING AND PARTS' LISTS EQUIPMENT - PART LISTS |
| ISO 4287-1:1984 | Surface roughness — Terminology — Part 1: Surface and its parameters |
| ISO 10209-1:1992 | Technical product documentation — Vocabulary — Part 1: Terms relating to technical drawings: general and types of drawings |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.