DIN ISO 965-1:2017-05
Current
Current
The latest, up-to-date edition.
ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013)
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
05-01-2017
Committee |
TC 1
|
DevelopmentNote |
Supersedes DIN 13-14 and DIN 13-15. (11/1999) Supersedes DIN 13-32. (02/2003)
|
DocumentType |
Standard
|
Pages |
25
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Supersedes |
Standards | Relationship |
ISO 965-1:2013 | Identical |
SNV ISO 965-1 : 1999 | Identical |
DIN 13-20:2000-08 | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 20: LIMITS OF SIZES FOR COARSE PITCH THREADS WITH THE PREFERRED TOLERANCE CLASSES - NOMINAL SIZES FROM 1 MM TO 68 MM |
DIN 258:2012-05 | Taper pins with thread ends and constant taper lengths |
DIN 931-2:2009-06 | Hexagon head bolts - Part 2: Metric thread M 68 to M 160 x 6 - Product grade B |
DIN 13-5:1999-11 | ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm |
DIN ISO 261:1999-11 | ISO general purpose metric screw threads - General plan (ISO 261:1998) |
DIN 13-25:2005-08 | ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm |
DIN 13-3:1999-11 | ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm |
DIN 6303:2006-08 | Knurled nuts |
DIN ISO 68-1:1999-11 | ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads (ISO 68-1:1998) |
DIN 802-6:2003-07 | TOLERANCES ON THE THREADED PORTION OF TAPS - PART 6: GROUND TAPS FOR TAPPED HOLES (EG) FOR WIRE THREAD INSERTS ACCORDING TO DIN 8140 FOR ISO METRIC COARSE AND FINE PITCH THREADS - MANUFACTURING TOLERANCES ON THE THREADED PORTION |
DIN ISO 262:1999-11 | ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998) |
DIN 13-10:1999-11 | ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm |
DIN ISO 6149-3:1996-11 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
DIN 464:2007-01 | Knurled thumb screws, high type |
DIN 935-3:2013-08 | HEXAGON SLOTTED NUTS - PART 3: METRIC COARSE PITCH THREAD, PRODUCT GRADE C |
DIN 186:2010-09 | T-head bolts with square neck |
DIN 466:2006-08 | Knurled nuts with collar |
DIN ISO 6696:2016-07 | Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989) |
DIN 5903-1:2011-01 | Fish bolts - Part 1: With round head and oval neck |
DIN 478:2016-08 | SQUARE HEAD BOLTS WITH COLLAR |
DIN EN ISO 6149-3:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
DIN EN ISO 3266:2016-05 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
DIN 7984:2009-06 | Hexagon socket head cap screws with low head |
DIN 547:2006-08 | Round nuts with drilled holes in one face |
DIN 3542:2013-10 | CONNECTORS AND SOCKETS FOR BEVERAGE CONTAINERS - MATING DIMENSIONS |
DIN 13-8:1999-11 | ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm |
DIN 13-1:1999-11 | ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm |
DIN EN ISO 9873:2016-03 (Draft) | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
DIN 261:2010-12 | T-head bolts |
DIN HDBK 1 : 25ED 2014 | |
DIN 797:2009-11 | Special foundation bolts |
DIN 603:2016-10 (Draft) | CUP HEAD SQUARE NECK BOLTS |
DIN EN ISO 8675:2016-05 (Draft) | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
DIN EN ISO 8765:2011-06 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
DIN EN ISO 8676:2011-07 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
DIN EN ISO 8673:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
DIN EN ISO 898-5:2012-09 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
DIN HDBK 1 E : 5ED 2014 | MECHANICAL ENGINEERING - BASIC STANDARDS 1 |
VDI 3334:2015-03 | Machining of internal threads |
DIN ISO 6149-2:1996-11 | PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
DIN 479:2016-08 | SQUARE HEAD BOLTS WITH SHORT DOG POINT |
DIN 444:2016-08 (Draft) | FASTENERS - EYE BOLTS |
DIN HDBK 45 : 11ED 2018 | |
DIN 7992:2010-09 | T-head bolts with large head |
DIN ISO 965-2:1999-11 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 2: LIMITS OF SIZES FOR GENERAL PURPOSE EXTERNAL AND INTERNAL SCREW THREADS - MEDIUM QUALITY |
DIN 935-1:2013-08 | HEXAGON SLOTTED AND CASTLE NUTS - PART 1: METRIC COARSE AND FINE PITCH THREAD, PRODUCT GRADES A AND B |
DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
DIN HDBK 193 : 5ED 2011 | |
DIN 3872:2012-02 | NON-SOLDERING COMPRESSION COUPLINGS - UNION NUTS FOR BUTT JOINTS |
DIN 318:2015-10 (Draft) | FASTENERS - WING SCREWS - EDGED WINGS |
DIN ISO 6698:2015-03 | CYCLES - SCREW THREADS USED TO ASSEMBLE FREEWHEELS ON BICYCLES HUBS (ISO 6698:1989) |
DIN ISO 1502:1996-12 | ISO GENERAL PURPOSE METRIC SCREW THREADS - GAUGES AND GAUGING |
DIN 3859-1:2005-09 | Compression couplings - Part 1: Technical delivery conditions |
DIN 13-22:2005-08 | ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm |
DIN 13-23:2005-08 | ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm |
DIN EN ISO 10683:2016-07 (Draft) | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
DIN EN 3660-001:2016-04 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION |
DIN EN ISO 15245-1:2013-11 | Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013) (includes Amendment A1:2013) |
DIN EN ISO 4034:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
DIN EN ISO 8674:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
DIN 34817:2001-04 | WELD SCREWS WITH METRIC THREAD |
DIN 548:2007-01 | Round nuts with set pin holes in side |
DIN 525:2009-11 | Studs for welding |
DIN 13-6:1999-11 | ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm |
DIN 7604:2016-05 | HEXAGON HEAD SCREW PLUGS - LIGHT TYPE - CYLINDRICAL THREAD |
DIN 13-21:2005-08 | ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 1 mm to 24,5 mm |
DIN HDBK 6-2 : 13ED 2009 | GEWINDEBOHRER, GEWINDESCHNEIDEISEN UND GEWINDEFURCHER - NORMEN, WERKZEUGE |
DIN 13-51:2013-10 | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 51: EXTERNAL SCREW THREADS FOR TRANSITION FITS (FORMER: SCREW THREADS FOR INTERFERENCE FIT) - TOLERANCES, LIMIT DEVIATIONS, LIMITS OF SIZES |
DIN ISO 8488:2016-07 | CYCLES - SCREW THREADS USED TO ASSEMBLE HEAD FITTINGS ON BICYCLE FORKS (ISO 8488:1986) |
DIN 908:2012-04 | INTERNAL DRIVE SCREW PLUGS WITH COLLAR - CYLINDRICAL THREAD |
DIN 5903-2:2011-01 | Fish bolts - Part 2: With square head |
DIN 8140-2:2005-08 | WIRE THREAD INSERTS FOR ISO METRIC SCREW THREADS - PART 2: HELICAL COIL THREADS FOR INSERTS, THREAD TOLERANCES |
DIN 604:2016-10 (Draft) | FLAT COUNTERSUNK HEAD NIB BOLTS |
DIN 13-7:1999-11 | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 7: NOMINAL SIZES FOR 2 MM FINE PITCH THREADS - NOMINAL DIAMETER FROM 17 MM TO 300 MM |
DIN EN ISO 4032:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
DIN EN 15048-1:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
DIN 13-52:1999-11 | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 52: MULTI-START THREAD TOLERANCES AND DEVIATION OF PROFILE |
DIN 316:2016-12 | FASTENERS - WING SCREWS - ROUNDED WINGS |
DIN 13-19:1999-11 | ISO general purpose metric screw threads - Part 19: Nominal profiles |
DIN 13-24:2005-08 | ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm |
DIN 1587:2014-07 | Hexagon domed cap nuts, high type |
DIN 467:2006-08 | Short knurled nuts |
DIN 13-9:1999-11 | ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm |
DIN 13-11:1999-11 | ISO general purpose metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm |
DIN 13-26:2005-08 | ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm |
DIN ISO 68-1 E : 1999 | ISO GENERAL PURPOSE SCREW THREADS - BASIC PROFILE - PART 1: METRIC SCREW THREADS |
DIN 13-52:2016-10 (Draft) | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 52: MULTI-START THREAD TOLERANCES AND DEVIATION OF PROFILE |
DIN 1445:2011-02 | Clevis pins with head and threaded portion |
DIN 202:1999-11 | SCREW THREADS - GENERAL PLAN |
DIN EN 50018 : 2001 AMD 1 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
DIN 13-4:1999-11 | ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm |
DIN 529:2010-09 | Masonry and foundation bolts |
DIN EN ISO 10684:2011-09 | Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008) |
DIN EN ISO 6149-2:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006) |
DIN EN ISO 4033:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |
ISO 5408:2009 | Screw threads Vocabulary |
DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
ISO 1502:1996 | ISO general-purpose metric screw threads Gauges and gauging |
ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
ISO 261:1998 | ISO general purpose metric screw threads General plan |
ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
US$117.82
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.