EN 10003-1 : 1994
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD
Superseded date
09-01-1999
Published date
01-12-2013
Publisher
Foreword
0 Introduction
1 Scope
2 Normative references
3 General conditions
4 Direct verification
5 Indirect verification
6 Intervals between verifications
7 Test report
Annex]
A (informative) Example of a method for an indirect
verification of the measuring system
Specifies the method for the Brinell hardness test for metallic materials.
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| SN EN 10003-1 : 1995 | Identical |
| NBN EN 10083-1 : 2007 | Corresponds |
| NEN EN 10003-1 : 1995 | Identical |
| BS EN 10003-1:1995 | Identical |
| UNI EN 10003-1 : 1996 ERRATA 2000 | Identical |
| NBN EN 10003-1 : 1995 | Identical |
| NF EN 10003-1 : 1994 | Identical |
| DIN EN 10003-1:1995-01 | Identical |
| I.S. EN 10003-1:1995 | Identical |
| NS EN 10003-1 : 1995 | Identical |
| NBN EN 10083-3 : 2007 COR 2008 | Corresponds |
| UNE-EN 10003-1:1995 | Identical |
| 99/709740 DC : DRAFT JUN 99 | PREN 10253-2 - BUTT WELDING PIPE FITTINGS - PART 2: WROUGHT CARBON AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| 00/705877 DC : 0 | PREN 4400-3 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| 05/30042912 DC : DRAFT JAN 2005 | PREN 15045 - TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE SEAMLESS ALUMINIUM OR ALUMINIUM ALLOY GAS CYLINDERS FOR PORTABLE CO[2] FIRE EXTINGUISHERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO 15 LITRES |
| 16/30338096 DC : 0 | BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| 03/318982 DC : DRAFT NOV 2003 | EN 14811-1 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - PART 1: GROOVED AND ASSOCIATED CONSTRUCTION |
| PREN 4400-4 : DRAFT 2003 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 303-1 : DRAFT 2016 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 1753:1998 | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
| BS EN 10095 : 1999-07 | HEAT RESISTING STEELS AND NICKEL ALLOYS |
| BS EN 10250-1:1999 | Open steel die forgings for general engineering purposes General requirements |
| BS EN 877 : 1999 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| BS EN 13331-2:2002 | Trench lining systems Assessment by calculation or test |
| BS EN 12862:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| DIN EN 10083-2:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| I.S. EN 877:2000 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 1043-1:1995 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
| EN 10254:1999 | Steel closed die forgings - General technical delivery conditions |
| EN 12862:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| EN 10003-3 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR BRINELL HARDNESS TESTING MACHINES |
| EN 10253-1:1999 | Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements |
| UNI EN 877 : 2007 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 10003-2 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
| EN 12797:2000/A1:2003 | BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| EN 877:1999/A1:2006/AC:2008 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| EN 1975:1999/A1:2003 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS ALUMINIUM AND ALUMINIUM ALLOY GAS CYLINDERS OF CAPACITY FROM 0.5 LITRE UP TO 150 LITRE |
| 08/30183119 DC : DRAFT AUG 2008 | BS EN 459-2 - BUILDING LIME - PART 2: TEST METHODS |
| I.S. EN 1043-1:1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| I.S. EN 1964-1:1999 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 50 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA |
| DD ENV 13797:2001 | Corrosion protection. Carbon and low alloy steels for use in hydrogen sulfide containing environments in oil and gas production. Materials and test methods. Guidelines |
| DIN EN 877:2010-01 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008) |
| BS EN 12797:2000 | Brazing. Destructive tests of brazed joints |
| BS EN 10250-2:2000 | Open steel die forgings for general engineering purposes Non-alloy quality and special steels |
| DIN EN 1975:2004-04 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS ALUMINUM AND ALUMINUM ALLOY GAS CYLINDERS OF CAPACITY FROM 0,5 LITRE UP TO 150 LITRES |
| DIN EN 1043-1:1996-02 | DESTRUCTIVE TEST ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| DIN EN 10003-2:1995-01 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
| I.S. EN 10003-2:1995 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
| SBAC TS 24 : 6 | MANUFACTURING SPECIFICATION FOR BOLTS, 1275 MPA (185,000 LBF/IN[2]) - TENSILE AT ROOM TEMPERATURE, 1000 MPA (145,000 LBF/IN[2]) TENSILE AT 650 DEGREE C |
| 05/30042957 DC : DRAFT JAN 2005 | EN 15047 - TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE SEAMLESS STEEL CYLINDERS FOR PORTABLE FIRE EXTINGUISHERS AND BOTTLES FOR BREATHING APPARATUS OF WATER CAPACITIES FROM 0,5 LITRE UP TO 15 LITRES |
| I.S. EN 1975:1999 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS ALUMINIUM AND ALUMINIUM ALLOY GAS CYLINDERS OF CAPACITY FROM 0.5 LITRE UP TO 150 LITRE |
| 99/701054 DC : DRAFT JAN 1999 | PREN 10089 - HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 12797:2000-12 | Brazing - Destructive tests of brazed joints; English version of DIN EN 12797 |
| BS EN 1753:1997 | Magnesium and magnesium alloys. Magnesium alloy ingots and castings |
| UNI EN 10250-1 : 2001 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS |
| I.S. EN 10250-2:2000 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 2: - NON-ALLOY QUALITY AND SPECIAL STEELS |
| UNI EN 12862 : 2002 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE WELDED ALUMINIUM ALLOY GAS CYLINDERS |
| I.S. EN 10250-1:2000 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10087:1999 | FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS |
| 03/106159 DC : DRAFT APR 2003 | EN 14653-2 - MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 2: ASSESSMENT BY CALCULATION OR TEST |
| 08/30180859 DC : DRAFT JUNE 2008 | BS EN 10218-1 - STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
| 03/306585 DC : 0 | EN 4400-7 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 7: ALUMINIUM ALLOY FORGINGS |
| PREN 4400-2 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 2: SHEET AND STRIP |
| BS EN 10253-1:1999 | Butt-welding pipe fittings Wrought carbon steel for general use and without specific inspection requirements |
| BS EN 1975:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre |
| BS EN 10087 : 1999-01 | FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS |
| BS EN 1964-1:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless steel with an <i>R</i><sub>m</sub> value of less than 1100 MPa |
| BS EN 1964-3:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless stainless steel with an <i>R</i><sub>m</sub> value of less than 1 100 MPa |
| BS EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| BS EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| BS EN 303-4:1999 | Heating boilers. Heating boilers with forced draught burners Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking |
| ONORM EN 877 : 2008 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 1753:1997/AC:1997 | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
| EN 1964-3:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa |
| EN 303-4:1999 | Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking |
| EN 1964-1:1999/AC:1999 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA |
| I.S. EN 10003-3:1995 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR BRINELL HARDNESS TESTING MACHINES |
| 03/109805 DC : DRAFT JUNE 2003 | EN 0023095 - TRANSPORTABLE GAS CYLINDERS - WELDED AUSTENITIC STAINLESS STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY FE OR EXPERIMENTAL METHODS |
| 03/310514 DC : 0 | BS EN 4400-4 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 4400-1 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: PLATE |
| PREN 4400-3 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| BS EN 10003-3:1995 | Metallic materials. Brinell hardness test Calibration of standardized blocks to be used for Brinell hardness testing machines |
| BS EN 10003-2:1995 | Metallic materials. Brinell hardness test Verification of Brinell hardness testing machines |
| BS EN 1043-1:1996 | Destructive tests on welds in metallic materials. Hardness testing. Hardness test on arc welded joints |
| BS EN 10254:1999 | Steel closed die forgings. General technical delivery conditions |
| EN 10087:1998 | Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
| EN 10250-2:1999 | Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels |
| EN 13331-2:2002 | Trench lining systems - Part 2: Assessment by calculation or test |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| EN 10250-1:1999 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| EN 10003-2 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
| EN 24498-1 : 1993 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS - MATERIALS OF ESSENTIALLY UNIFORM SECTION HARDNESS |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.