• There are no items in your cart

EN 10083-1:2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Steels for quenching and tempering - Part 1: General technical delivery conditions
Superseded date

07-26-2019

Published date

08-09-2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
   4.1 Classification
   4.2 Designation
5 Information to be supplied by the purchaser
   5.1 Mandatory information
   5.2 Options
6 Manufacturing process
   6.1 General
   6.2 De-oxidation
   6.3 Heat treatment and surface condition at delivery
   6.4 Cast separation
7 Requirements
   7.1 Chemical composition, hardenability and mechanical
        properties
   7.2 Machinability
   7.3 Shearability of semi-finished products and bars
   7.4 Structure
   7.5 Internal soundness
   7.6 Surface quality
   7.7 Dimensions, tolerances on dimensions and shape
8 Inspection
   8.1 Testing procedures and types of documents
   8.2 Frequency of testing
   8.3 Tests to be carried out for specific inspection
9 Preparation of samples and test pieces
   9.1 Selection and preparation of samples for chemical
        analysis
   9.2 Location and orientation of samples and test pieces
        for mechanical tests
   9.3 Location and preparation of samples for hardness and
        hardenability tests
   9.4 Identification of samples and test pieces
10 Test methods
   10.1 Chemical analysis
   10.2 Mechanical tests
   10.3 Hardness and hardenability tests
   10.4 Retests
11 Marking, labelling, packaging
Annex A (normative) Ruling sections for the mechanical properties
Annex B (normative) Options
Annex C (informative) Other relevant standards
Annex D (informative) Dimensional standards applicable to products
                      complying with this European Standard
Annex E (informative) Determining the non-metallic inclusion
                      content

This part of EN 10083 specifies the general technical delivery requirements forsemi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3),bars (see NOTE 2),rod,wide flats,hot-rolled strip and sheet/plate,forgings (see NOTE 2)manufactured from the direct hardening non alloy steels for quenching and tempering (see EN 10083-2), the direct hardening alloy steels for quenching and tempering (see EN 10083-3), the non alloy flame and induction hardening steels (see EN 10083-2) and the alloy flame and induction hardening steels (see EN 10083-3), and supplied in one of the heat treatment conditions given for the different types of products in the relevant tables of EN 10083-2 and EN 10083-3 and in one of the surface conditions given in the relevant tables of EN 10083-2 and EN 10083-3.The steels are generally intended for the manufacture of quenched and tempered, flame or induction hardened machine parts, but can also be used in the normalized condition (see EN 10083-2).Where applicable, the requirements for mechanical properties given in EN 10083-2 and EN 10083-3 are restricted to the relevant tables in these documents.NOTE 1European Standards on similar grades are listed in Annex C.NOTE 2Hammer forged semi-finished products (blooms, billets, slabs etc.), seamless rolled rings and hammer forged bars are in the following covered under semi-finished products or bars and not under the term "forgings".NOTE 3Special agreements should be made when ordering un-worked continuously cast semi-finished products.NOTE 4In accordance with EN 10020, the steels covered by EN 10083-2:2006 are quality and special steels, the steels covered by EN 10083-3:2006 are special steels. The differences between quality and special steels are characterized by the following requirements, which are valid for special steels only:the minimum impact values in the quenched and tempered condition (for non alloy special steels in the case of

Committee
CEN/TC 459/SC 5
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

UNE-EN 10343:2010 Steels for quenching and tempering for construction purposes - Technical delivery conditions
96/106185 DC : DRAFT AUG 1996 PREN 1337-5 - STRUCTURAL BEARINGS - PART 5: POT BEARINGS
BS EN 4500-005:2012 Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for steels
PREN 14199 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
I.S. EN 10052:1994 VOCABULARY OF HEAT TREATMENT TERMS FOR FERROUS PRODUCTS
UNI EN 4632-003 : 2011 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
EN 10085:2001 Nitriding steels - Technical delivery conditions
02/710618 DC : DRAFT SEP 2002 BS EN 13852-2 - CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES
13/30280743 DC : 0 BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS EN 10343:2009 Steels for quenching and tempering for construction purposes. Technical delivery conditions
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 1554 : DRAFT 2011 CONVEYOR BELTS - DRUM FRICTION TESTING
DIN EN 10048:1996-10 HOT-ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
BS EN 10083-3 : 2006-08 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
PREN 4632-003 : DRAFT 2008 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
I.S. EN 14638-3:2010 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
PREN 2500/3 : 200P3 AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 3: SPECIFIC REQUIREMENTS FOR HEAT RESISTING ALLOYS
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
I.S. EN 13322-1:2003 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
18/30365854 DC : 0 BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
BS EN 10250-3:2000 Open steel die forgings for general engineering purposes Alloy special steels
BS EN 10089:2002 Hot rolled steels for quenched and tempered springs. Technical delivery conditions
BS EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
BS EN 12699:2015 Execution of special geotechnical works. Displacement piles
I.S. EN 10084:2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN 10083-2:2006-10 STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
I.S. EN 12699:2015 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
DIN EN 15520:2007-11 Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings
UNI EN 13411-7 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
EN 1337-4:2004/AC:2007 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
EN 1337-6:2004 Structural bearings - Part 6: Rocker bearings
EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
EN 10250-3:1999 Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
DIN 6773:2001-04 HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS
04/30125076 DC : 0 EN 10111 - CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
02/106055 DC : 0 PREN 14545 - TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
96/700090 DC : 0 PREN 4500-5 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 5: SPECIFIC RULES FOR STEELS
UNI EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
06/30146741 DC : 0 EN 10277-5 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 5: STEELS FOR QUENCHING AND TEMPERING
NFL 22-031 : H2003 FASTENERS - SELECTION OF METALLIC MATERIALS
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
DIN EN 10343:2009-07 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
DIN EN 14592 E : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
BS EN 14592 : 2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
PREN 1337-6 : DRAFT 2018 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
DIN EN 12699:2015-07 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
DIN EN 10297-1 E : 2003 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 13411-6 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
DIN EN 13411-7 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
DIN EN 1554:2012-10 CONVEYOR BELTS - DRUM FRICTION TESTING
DIN EN 1337-6:2004-08 Structural bearings - Part 6: Rocker bearings
DIN EN 10297-1:2003-06 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 15049:2007-12 Railway applications - Suspension components - Torsion bar, steel
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN 1554:2012 Conveyor belts. Drum friction testing
ISO 18265:2013 Metallic materials Conversion of hardness values
BS EN 10250-2:2000 Open steel die forgings for general engineering purposes Non-alloy quality and special steels
I.S. EN 13852-1:2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN ISO 18265:2013 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
DIN EN 13852-2:2005-03 Cranes - Offshore cranes - Part 2: Floating cranes
I.S. EN 13411-6:2004 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
I.S. EN 10083-2:2006 STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
I.S. EN 13411-7:2006 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
DIN EN 10083-3:2007-01 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
I.S. EN 10111:2008 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNI EN 10111 : 2008 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
VDI 3388:2012-03 Materials for trimming and forming dies
VDI 3357:2014-01 Sliding elements in large stamping dies
KTA 3507 : 2014(R2017) FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
KTA 3702 : 2014(R2017) EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
VDI 3387:2014-09 Heel guidings in large stamping and forming dies
NFL 06 380-21 : 2003 AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 21: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
13/30281192 DC : 0 BS EN ISO 9934-2 - NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
13/30284484 DC : 0 BS CISPR 14-1 ED 6 - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION
BS EN 14638-3:2010 Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded carbon steel cylinders made to a design justified by experimental methods
17/30338768 DC : 0 BS ISO 20929 - TOOLS FOR PRESSING - HEEL GUIDE PLATES IN LARGE STAMPING AND FORMING DIES
00/707659 DC : DRAFT APR 2000 PREN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
11/30210148 DC : 0 BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES
17/30347443 DC : DRAFT JUN 2017 BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
13/30279826 DC : 0 BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
EN 115-1:2017 Safety of escalators and moving walks - Part 1: Construction and installation
16/30322061 DC : DRAFT MAR 2016 BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
I.S. EN 10085:2001 NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS
API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
I.S. EN 115-1:2017 SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
NF EN 4632-003 : 2010 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
ONORM EN 13322-1 : 2006 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
I.S. EN 4632-003:2010 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
PREN 15566 : DRAFT 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
ISO/TR 14799-1:2015 Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison
PREN 13001-3-4 : DRAFT 2016 CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
DIN EN 15520 E : 2007 THERMAL SPRAYING - RECOMMENDATIONS FOR CONSTRUCTIONAL DESIGN OF COMPONENTS WITH THERMALLY SPRAYED COATINGS
DIN EN 1337-4 E : 2004 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
DIN EN 10089:2003-04 Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002
DIN EN 1337-4:2004-08 Structural bearings - Part 4: Roller bearings
BS EN 13411-6 : 2004 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
UNI EN ISO 18265 : 2014 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN 10083-3 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 14566 : 2009 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 10250-3:2000 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 3: ALLOY SPECIAL STEELS
UNI EN 10084 : 2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
UNI EN 13852-1 : 2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
I.S. EN 10250-2:2000 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 2: - NON-ALLOY QUALITY AND SPECIAL STEELS
UNI EN 1554 : 2012 CONVEYOR BELTS - DRUM FRICTION TESTING
I.S. EN 10087:1999 FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS
BS EN 4632-003:2010 Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
BS EN ISO 14713-1:2017 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures General principles of design and corrosion resistance
DIN EN ISO 14713-1:2010-05 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
UNI EN 10343 : 2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
DIN EN 14592:2012-07 Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012)
PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
13/30241415 DC : 0 BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
DIN 20043:2003-09 STAPLE-LOCK COUPLINGS FOR HYDRAULIC POWER-TRANSMISSION CIRCUITS
DIN EN 14638-3:2012-06 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012)
09/30195286 DC : 0 BS EN 14587-3 - RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
DIN 1652-1:1990-11 BRIGHT STEEL - GENERAL TECHNICAL DELIVERY CONDITIONS
00/705761 DC : DRAFT FEB 2000 PREN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
UNI EN 14638-3 : 2010 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
UNE-EN 14592:2009 Timber structures - Dowel-type fasteners - Requirements
UNI EN 4500-005 : 2014 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS
PREN 13852 : DRAFT 2000 CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
EN 10083-3:2006/AC:2008 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
DIN EN 13322-1:2006-05 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
ISO/TR 14799-2:2015 Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
I.S. EN 14592:2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
EN 12480:2018 Gas meters - Rotary displacement gas meters
I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
DIN EN 13814:2005-06 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
DIN EN 15049 E : 2007 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
UNE-EN 1554:2012 Conveyor belts - Drum friction testing
DIN EN 10084:2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN ISO 18265:2014-02 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
DIN EN 13852-1:2014-01 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
DIN EN 10085:2001-07 Nitriding steels - Technical delivery conditions; English version of DIN EN 10085
BS EN 13322-1 : 2003 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN 10084 : 2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
BS EN 10087 : 1999-01 FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS
ISO 14713-1:2017 Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance
15/30324856 DC : 0 BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
BS EN 10083-2:2006 Steels for quenching and tempering Technical delivery conditions for non alloy steels
BS EN 1337-6:2004 Structural bearings Rocker bearings
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
BS EN 1065:1999 Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests
BS EN 13411-7 : 2006 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
BS EN 10048:1997 Hot rolled narrow steel strip. Tolerances on dimensions and shape
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
BS EN 15049:2007 Railway applications. Suspension components. Torsion bar, steel
PD ISO/TR 14799-2:2005 Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments
UNE-EN ISO 18265:2014 Metallic materials - Conversion of hardness values (ISO 18265:2013)
BS EN 10085 : 2001-05 NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS
BS EN 13298:2003 Railway applications. Suspension components. Helical suspension springs, steel
UNE-EN 13852-1:2014 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 4500-005:2012 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN 13814:2004 Fairground and amusement park machinery and structures - Safety
EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
I.S. EN 15520:2007 THERMAL SPRAYING - RECOMMENDATIONS FOR CONSTRUCTIONAL DESIGN OF COMPONENTS WITH THERMALLY SPRAYED COATINGS
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
EN 1554:2012 Conveyor belts - Drum friction testing
EN ISO 18265:2013 Metallic materials - Conversion of hardness values (ISO 18265:2013)
EN ISO 14713-1:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
EN 13852-1:2013 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 14638-3:2010/AC:2012 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
EN 4632-003:2010 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
EN 15520:2007 Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings
EN 13852-2:2004 Cranes - Offshore cranes - Part 2: Floating cranes
I.S. EN 13814:2005 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
10/30239363 DC : 0 BS EN 4500-5 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 5: SPECIFIC RULES FOR STEELS
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
I.S. EN 1554:2012 CONVEYOR BELTS - DRUM FRICTION TESTING
I.S. EN 4500-005:2012 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS
11/30250552 DC : 0 BS EN 1554 - CONVEYOR BELTS - DRUM FRICTION TESTING
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
NF EN 14638-3 : 2010 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL, CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
I.S. EN ISO 14713-1:2017 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
UNE-EN 14638-3:2011 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
BS EN 13001-3-5:2016 Cranes. General design Limit states and proof of competence of forged hooks
DIN 1652-4:1990-11 BRIGHT STEEL MADE FROM STEEL FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS
17/30335249 DC : 0 BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES
UNE-EN ISO 14713-1:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
DIN EN ISO 14713-1 E : 2010 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
PREN 4500-005 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS
KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
I.S. EN 10343:2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
BS EN 115-1:2017 Safety of escalators and moving walks Construction and installation
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 13322-1:2003/A1:2006 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
I.S. EN 10083-3:2006 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
DIN EN 13298:2003-11 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HELICAL SUSPENSION SPRINGS, STEEL
DIN EN 1337-6 E : 2004 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
BS EN 13852-2:2004 Cranes. Offshore cranes Floating cranes
BS EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes
BS EN 15520:2007 Thermal spraying. Recommendations for constructional design of components with thermally sprayed coatings
BS EN 13814:2004 Fairground and amusement park machinery and structures. Safety
BS EN 13852-1:2013 Cranes. Offshore cranes General-purpose offshore cranes
BS EN 1337-4:2004 Structural bearings Roller bearings
BS EN ISO 18265:2013 Metallic materials. Conversion of hardness values
PD ISO/TR 14799-1:2005 Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
EN 10087:1998 Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods
DIN EN 13411-6:2009-04 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
EN 10084:2008 Case hardening steels - Technical delivery conditions
EN 10250-2:1999 Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 10343:2009 Steels for quenching and tempering for construction purposes - Technical delivery conditions
EN 1065:1998 Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards
EN 12699:2015 Execution of special geotechnical works - Displacement piles
EN 10089:2002 Hot-rolled steels for quenched and tempered springs - Technical delivery conditions
DIN EN 13411-7:2009-04 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket (includes Amendment A1:2008)
DIN EN 10111:2008-06 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 13298:2003 Railway applications - Suspension components - Helical suspension springs, steel

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
CR 10261 : 1995 ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 10079:2007 Definition of steel products
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
ISO 642:1999 Steel — Hardenability test by end quenching (Jominy test)
EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
ISO 3887:2003 Steels Determination of depth of decarburization
EN 10021:2006 General technical delivery conditions for steel products
EN ISO 642:1999 Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999)
AS 1735.5.1:2019 Lifts, escalators and moving walks Safety of escalators and moving walks - Construction and installation (EN 115-1:2017, MOD)
EN 10204:2004 Metallic products - Types of inspection documents
ISO 643:2012 Steels Micrographic determination of the apparent grain size
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
EN 10020:2000 Definition and classification of grades of steel
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
EN 10083-3:2006/AC:2008 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.