EN 10264-4:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
02-21-2022
01-11-2012
Foreword
1 Scope
2 Normative references
3 Designation of product
4 General conditions of manufacture
5 Characteristics and requirements
6 Test methods
This part of this European Standard specifies the characteristics of stainless steel wire for the manufacture of ropes that are exposed to corrosion and in some cases to a moderate temperature.This part of this European Standard specifies the following for stainless steel wire for ropes:-dimensional tolerances;-mechanical characteristics;-requirements relating to the chemical composition of the stainless steel wire;-conditions to be satisfied by any coating.
Committee |
CEN/TC 459/SC 6
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
BS EN 10264-4:2012 | Identical |
NF EN 10264-4 : 2012 | Identical |
NBN EN 10264-4 : 2012 | Identical |
I.S. EN 10264-4:2012 | Identical |
NS EN 10264-4 : 2012 | Identical |
SN EN 10264-4 : 2012 | Identical |
UNE-EN 10264-4:2012 | Identical |
PN EN 10264-4 : 2012 | Identical |
UNI EN 10264-4 : 2012 | Identical |
NEN EN 10264-4 : 2012 | Identical |
DIN EN 10264-4:2012-03 | Identical |
PREN 13658-2 : DRAFT 2017 | METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING |
UNE-EN 10088-5:2010 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
PREN 13658-1 : DRAFT 2017 | METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING |
15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
I.S. EN 10088-5:2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
BS EN 13658-2:2005 | Metal lath and beads. Definitions, requirements and test methods External rendering |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
I.S. EN 10264-1:2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
DIN EN 10088-1:2014-12 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
DIN EN 1993-1-11:2010-12 | Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components (includes Corrigendum AC:2009) |
I.S. EN 10088-1:2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN EN 10088-3:2014-12 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 10088-5 : 2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction |
99/107820 DC : DRAFT OCT 1999 | BS EN 13658-2 - METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING |
CEN/TR 15623:2008 | Food processing machinery - Route map - Materials for food area |
UNE-EN 1993-1-11:2015 | Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components |
S.R. CEN TR 15623:2008 | FOOD PROCESSING MACHINERY - ROUTE MAP - MATERIALS FOR FOOD AREA |
EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
BS EN 10264-1:2012 | Steel wire and wire products. Steel wire for ropes General requirements |
UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 10264-1 : 2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
EN 10264-1:2012 | Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
UNI EN 1993-1-11 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
UNI EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
17/30357430 DC | BS EN 13658-2. Metal lath and beads. Definitions, requirements and test methods. Part 2. External rendering |
08/30180147 DC : DRAFT JUNE 2008 | BS EN 10264-1 - STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
DIN EN 10088-5:2009-07 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
17/30357427 DC | BS EN 13658-1. Metal lath and beads. Definitions, requirements and test methods. Part 1. Internal plastering |
NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
BS EN 13658-1:2005 | Metal lath and beads. Definitions, requirements and test methods Internal plastering |
UNE-EN 10264-1:2012 | Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
EN 13658-2:2005 | Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering |
EN 13658-1:2005 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
EN 1993-1-11:2006/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
I.S. EN 1993-1-11:2006 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS (INCLUDING IRISH NATIONAL ANNEX) |
PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
PD CEN/TR 15623:2008 | Food processing machinery. Route map. Materials for food area |
BS EN 10088-5:2009 | Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
99/105869 DC : DRAFT JUL 1999 | EN 13658-1 - METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING |
11/30254165 DC : 0 | BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
PREN 10088-1 : DRAFT 2011 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
DIN EN 13658-1:2005-09 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
DIN EN 13658-2:2005-09 | Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering |
BS EN 1993-1-11:2006 | Eurocode 3. Design of steel structures Design of structures with tension components |
UNE-EN 10088-1:2015 | Stainless steels - Part 1: List of stainless steels |
BS EN 10088-1:2014 | Stainless steels List of stainless steels |
DIN EN 10264-1:2012-03 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
EN 10095:1999 | Heat resisting steels and nickel alloys |
EN 10264-1:2012 | Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.