• There are no items in your cart

EN 10270-3:2011

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Steel wire for mechanical springs - Part 3: Stainless spring steel wire
Superseded date

02-19-2022

Published date

10-26-2011

Foreword
1 Scope
2 Normative references
3 Information to be supplied by the purchaser
4 Requirements
5 Testing and inspection
6 Marking and packaging
Annex A (informative) - Additional information
Annex B (informative) - Cross reference of steel grade
        designations
Bibliography

1.1This European Standard applies to the grades of stainless steels listed in Table 1, which are usually used in the cold drawn condition in the form of wire of circular cross-section up to 10,00 mm in diameter, for the production of springs and spring parts that are exposed to corrosive effects and sometimes to slightly increased temperatures (see A.1).1.2In addition to the steels listed in Table 1 certain of the steel grades covered by EN 10088-3 e.g. 1.4571, 1.4539, 1.4028 are also used for springs, although to much lesser extent. In these cases the mechanical properties (tensile strength, etc.) should be agreed between purchaser and supplier. Similarly, diameters between 10,00 mm and 15,00 mm may be ordered according to this standard; in this case the parties should agree upon the required mechanical characteristics.1.3In addition to this European Standard the general technical delivery requirements of EN 10021 are applicable.

Committee
CEN/TC 459/SC 6
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
UNE-EN 10088-5:2010 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
BS EN 6092:2016 Aerospace series. Receptacle, floating, double lug
BS EN 10088-5:2009 Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
12/30271121 DC : 0 BS EN 13906-1 - CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 1: COMPRESSION SPRINGS
PREN 14129 : DRAFT 2011 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS
15/30316161 DC : 0 BS ISO 6931-1 - STAINLESS STEELS FOR SPRINGS - PART 1: WIRE
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
PREN 6093 : 200P1 AEROSPACE SERIES - RECEPTACLE, FLOATING, SINGLE LUG
EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
I.S. EN 10088-5:2009 STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
I.S. EN 13906-3:2014 CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 3: TORSION SPRINGS
DIN EN 15800:2009-03 CYLINDRICAL HELICAL SPRINGS MADE OF ROUND WIRE - QUALITY SPECIFICATIONS FOR COLD COILED COMPRESSION SPRINGS
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
08/30167437 DC : DRAFT JAN 2008 BS EN ISO 28622 - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
UNE-EN 13175:2015 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
12/30265334 DC : 0 BS EN 13953 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
12/30271124 DC : 0 BS EN 13906-2 - CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 2: EXTENSION SPRINGS
11/30248684 DC : 0 BS EN 14129 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS
PREN 13906-3 : DRAFT 2013 CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 3: TORSION SPRINGS
I.S. EN 14071:2015 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
BS EN 13175:2014 LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
UNE-EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
BS EN 14071:2015 LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
UNE-EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
17/30362889 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
EN 13953:2015 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
I.S. EN 13906-2:2013 CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 2: EXTENSION SPRINGS
I.S. EN 13953:2015 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
I.S. EN 13799:2012 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS
DIN EN 10088-1:2014-12 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
I.S. EN 14129:2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
I.S. EN 10088-1:2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
I.S. EN 10088-3:2014 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 10088-3:2014-12 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 13906-1:2013 CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BARS - CALCULATION AND DESIGN - PART 1: COMPRESSION SPRINGS
PREN 13953 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
10/30218988 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) TANK VALVES AND FITTINGS
14/30300117 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
UNI EN 10088-5 : 2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction
08/30178034 DC : DRAFT APR 2008 BS EN 15800 - CYLINDRICAL HELICAL SPRINGS MADE OF ROUND WIRE - QUALITY SPECIFICATIONS FOR COLD COILED COMPRESSION SPRINGS
13/30279723 DC : 0 BS EN 13906-3 - CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 3: TORSION SPRINGS
CEN/TR 15623:2008 Food processing machinery - Route map - Materials for food area
PREN 13906-1 : DRAFT 2012 CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 1: COMPRESSION SPRINGS
PREN 6092 : 200P2 AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG
S.R. CEN TR 15623:2008 FOOD PROCESSING MACHINERY - ROUTE MAP - MATERIALS FOR FOOD AREA
ISO 6931-1:2016 Stainless steels for springs Part 1: Wire
DIN EN 13906-1:2013-11 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs
BS EN 13906-3:2014 Cylindrical helical springs made from round wire and bar. Calculation and design Torsion springs
BS EN 13906-1:2013 Cylindrical helical springs made from round wire and bar. Calculation and design Compression springs
UNE-EN 10088-3:2015 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
UNE-EN 13953:2015 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
UNI EN 10088-3 : 2014 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 13799 : 2012 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS
UNI EN 13906-3 : 2014 CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 3: TORSION SPRINGS
UNI EN 13906-1 : 2013 CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 1: COMPRESSION SPRINGS
UNI EN 13906-2 : 2013 CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 2: EXTENSION SPRINGS
UNI EN 14129 : 2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
UNI EN 10088-1 : 2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
09/30205570 DC : 0 BS EN 13799 - LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS
UNI EN 15800 : 2009 CYLINDRICAL HELICAL SPRINGS MADE OF ROUND WIRE - QUALITY SPECIFICATIONS FOR COLD COILED COMPRESSION SPRINGS
12/30266928 DC : 0 BS EN 14071 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
11/30254168 DC : 0 BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
BS EN 6094:2016 Aerospace series. Washer, spring, countersunk
PREN 13906-2 : DRAFT 2012 CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 2: EXTENSION SPRINGS
DIN EN 10088-5:2009-07 STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
DIN 20043:2003-09 STAPLE-LOCK COUPLINGS FOR HYDRAULIC POWER-TRANSMISSION CIRCUITS
I.S. EN 6092:2016 AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG
DIN EN 14071:2015-08 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
PREN 13799 : DRAFT 2009 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS
DIN EN 13906-3:2014-06 CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 3: TORSION SPRINGS
DIN EN 13953:2015-05 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
DIN EN 14129:2014-05 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
DIN EN 13799:2012-06 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 14129:2014 LPG Equipment and accessories. Pressure relief valves for LPG pressure vessels
BS EN 13799:2012 LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 10088-3:2014 Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
BS EN 13953:2015 LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
EN 15800:2008 Cylindrical helical springs made of round wire - Quality specifications for cold coiled compression springs
EN 6094:2016 Aerospace series - Washer, spring, countersunk
EN 13906-2:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs
EN 6092:2016 Aerospace series - Receptacle, floating, double lug
EN 14129:2014 LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs
EN 13906-3:2014 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3: Torsion springs
I.S. EN 15800:2009 CYLINDRICAL HELICAL SPRINGS MADE OF ROUND WIRE - QUALITY SPECIFICATIONS FOR COLD COILED COMPRESSION SPRINGS
BS EN 15800:2008 Cylindrical helical springs made of round wire. Quality specifications for cold coiled compression springs
UNI EN 13175 : 2015 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
DIN EN 15800 E : 2009 CYLINDRICAL HELICAL SPRINGS MADE OF ROUND WIRE - QUALITY SPECIFICATIONS FOR COLD COILED COMPRESSION SPRINGS
PREN 10088-3 : DRAFT 2011 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
PD CEN/TR 15623:2008 Food processing machinery. Route map. Materials for food area
01/715519 DC : DRAFT NOV 2001 PREN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
I.S. EN 6094:2016 AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK
01/715452 DC : DRAFT NOV 2001 PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
11/30254165 DC : 0 BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
PREN 6091 : 200P1 AEROSPACE SERIES - CIRCLIP
I.S. EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
DIN EN 13175:2015-02 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
PREN 10088-1 : DRAFT 2011 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
UNE-EN 10088-1:2015 Stainless steels - Part 1: List of stainless steels
BS EN 13906-2:2013 Cylindrical helical springs made from round wire and bar. Calculation and design Extension springs
BS EN 10088-1:2014 Stainless steels List of stainless steels
EN 10088-5:2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
DIN EN 13906-2:2013-09 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10218-1:2012 Steel wire and wire products - General - Part 1: Test methods
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
BS 2056:1991 Specification for stainless steel wire for mechanical springs
EN 10021:2006 General technical delivery conditions for steel products
EN 10204:2004 Metallic products - Types of inspection documents
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
ISO 6931-1:2016 Stainless steels for springs Part 1: Wire

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.