EN 10303:2015
Current
The latest, up-to-date edition.
Thin magnetic steel strip and sheet for use at medium frequencies
10-28-2015
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Designation
6 Information to be supplied by purchaser
7 General requirements
8 Technical requirements
9 Inspection
10 Marking, labelling and packaging
11 Complaints
Annex A (informative) - Minimum stacking factor for
non-oriented coated products
Annex B (informative) - Maximum specific total loss
at 1,0T and 700 Hz and at 1,5T and 400Hz for
non-oriented products
Annex C (informative) - Density determination
Annex D (informative) - Mechanical properties for
non-oriented products
Annex E (informative) - Changes to the previous version
EN 10303:2001
Bibliography
This European Standard defines the grades of thin non-oriented magnetic steel strip and sheet in nominal thicknesses of 0,05 mm, 0,10 mm, 0,15 mm, 0,20 mm, 0,25 mm, 0,27 mm,0,30 mm and 0,35 mm, and of thin grain-oriented magnetic steel strip and sheet in nominal thicknesses of 0,05 mm, 0,10 mm, 0,15 mm and 0,18 mm. In particular, it gives general requirements, magnetic properties, geometric characteristics and tolerances and technological characteristics, as well as inspection procedure.This European Standard applies to magnetic steel strip and sheet supplied in the finally annealed condition in coils and intended for the construction of magnetic circuits used at frequencies equal to or higher than 100 Hz.
| Committee |
CEN/TC 459/SC 8
|
| DevelopmentNote |
Supersedes PREN 10303. (11/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 10303:2016 | Identical |
| NEN EN 10303 : 2015 | Identical |
| I.S. EN 10303:2015 | Identical |
| BS EN 10303:2015 | Identical |
| DIN EN 10303:2016-02 | Identical |
| UNI EN 10303 : 2003 | Identical |
| NF EN 10303 : 2015 | Identical |
| UNE-EN 10303:2016 | Identical |
| NBN EN 10303 : 2015 | Identical |
| SN EN 10303:2015 | Identical |
| NS EN 10303 : 2001 | Identical |
| PN EN 10303 : 2016 | Identical |
| EN 10079:2007 | Definition of steel products |
| I.S. EN 10342:2005 | MAGNETIC MATERIALS - CLASSIFICATION OF SURFACE INSULATIONS OF ELECTRICAL STEEL SHEET, STRIP AND LAMINATIONS |
| DIN EN 10342:2005-09 | MAGNETIC MATERIALS - CLASSIFICATION OF SURFACE INSULATIONS OF ELECTRICAL STEEL SHEET, STRIP AND LAMINATIONS |
| 04/30125760 DC : DRAFT NOV 2004 | EN 10342 - MAGNETIC MATERIALS - CLASSIFICATION OF SURFACE INSULATIONS OF ELECTRICAL STEEL SHEET, STRIP AND LAMINATIONS |
| I.S. EN 10079:2007 | DEFINITION OF STEEL PRODUCTS |
| UNI EN 10079 : 2007 | DEFINITION OF STEEL PRODUCTS |
| BS EN 10342:2005 | Magnetic materials. Classification of surface insulations of electrical steel sheet, strip and laminations |
| BS EN 10079:2007 | Definition of steel products |
| EN 10342:2005 | Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations |
| DIN EN 10079:2007-06 | Definition of steel products |
| EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| IEC 60404-10:2016 | Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies |
| EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| IEC 60050-221:1990 | International Electrotechnical Vocabulary (IEV) - Part 221: Magnetic materials and components |
| ISO 7799:1985 | Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test |
| EN ISO 7799:2000 | Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 60404-2:1998/A1:2008 | MAGNETIC MATERIALS - PART 2: METHODS OF MEASUREMENT OF THE MAGNETIC PROPERTIES OF ELECTRICAL STEEL STRIP AND SHEET BY MEANS OF AN EPSTEIN FRAME |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| EN 60404-13 : 2007 | MAGNETIC MATERIALS - PART 13: METHODS OF MEASUREMENT OF DENSITY, RESISTIVITY AND STACKING FACTOR OF ELECTRICAL STEEL SHEET AND STRIP |
| EN 10251:1997 | Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
| IEC 60050-121:1998 | International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism |
| EN 10342:2005 | Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations |
| IEC 60404-2:1996+AMD1:2008 CSV | Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| IEC 60404-13:1995 | Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
| EN 10252:1997 | Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.