EN 1062-1:2004
Current
Current
The latest, up-to-date edition.
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification
Published date
06-09-2004
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description
4.1 Description by chemical type of binder
4.2 Description by the state of dissolution
or dispersion of the binder in the coating material
5 Classification
5.1 General
5.2 Gloss
5.3 Dry film thickness
5.4 Grain size
5.5 Water vapour transmission rate
5.6 Liquid water permeability
5.7 Crack-bridging
5.8 Carbon dioxide permeability
6 Designation code
Annex A (informative) Guide to selection of coatings
A.1 Introduction
A.2 Scope
A.3 Selection of coatings
A.4 Suitability factors
A.4.1 Substrate factors
A.4.2 Architectural factors
A.4.3 Environmental factors
A.4.4 Durability factors
A.4.5 Specification factors
A.5 Coating properties and characteristics
A.5.1 Classification
A.5.2 Special requirements for coating systems for
exterior masonry and concrete
A.6 Coating application: basic principles
A.6.1 General
A.6.2 Conditions of use
This European Standard specifies a general system for the description of coating materials and coating systems for the preservation, decoration and protection of exterior new and old, coated or uncoated masonry and concrete. It also includes a classification system based on certain physical properties.This European Standard is applicable to all coating materials and coating systems for exterior masonry and concrete, including those for use in external thermal insulation systems.
| Committee |
CEN/TC 139
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 1062-1:2004 | Identical |
| NEN EN 1062-1 : 2004 | Identical |
| I.S. EN 1062-1:2004 | Identical |
| NS EN 1062-1 : 2ED 2004 | Identical |
| PN EN 1062-1 : 2005 | Identical |
| NF EN 1062-1 : 2004 | Identical |
| DIN EN 1062-1:2004-08 | Identical |
| UNI EN 1062-1 : 2005 | Identical |
| UNE-EN 1062-1:2005 | Identical |
| NBN EN 1062-1 : 2004 | Identical |
| SN EN 1062-1 : 2004 | Identical |
| DIN EN 16566 E : 2014 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTION OF FILLERS TO EUROPEAN STANDARDS |
| I.S. EN ISO 7783-2:1999 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 2: DETERMINATION AND CLASSIFICATION OF WATER-VAPOUR TRANSMISSION RATE (PERMEABILITY) |
| DIN EN 16566:2014-08 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTION OF FILLERS TO EUROPEAN STANDARDS |
| BS EN 16105:2011 | Paints and varnishes. Laboratory method for determination of release of substances from coatings in intermittent contact with water |
| 02/123276 DC : DRAFT AUG 2002 | BS EN 1062-7 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 7: DETERMINATION OF CRACK BRIDGING PROPERTIES |
| I.S. EN 13300:2001 | PAINTS AND VARNISHES - WATER-BORNE COATING MATERIALS AND COATING SYSTEMS FOR INTERIOR WALLS AND CEILINGS - CLASSIFICATION |
| I.S. EN 16105:2011 | PAINTS AND VARNISHES - LABORATORY METHOD FOR DETERMINATION OF RELEASE OF SUBSTANCES FROM COATINGS IN INTERMITTENT CONTACT WITH WATER |
| UNE-EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| I.S. EN 1062-3:2008 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
| EN 1062-7:2004 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
| 10/30218101 DC : 0 | BS EN 16105 - PAINTS AND VARNISHES - LEACHING OF SUBSTANCES FROM COATINGS - LABORATORY IMMERSION METHOD |
| BS EN 16566:2014 | Paints and varnishes. Fillers for internal and/or external works. Adaptation of fillers to European standards |
| 12/30256053 DC : 0 | BS EN 16383 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE HYGROTHERMAL BEHAVIOUR OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERS (ETICS) |
| BS EN 16383:2016 | Thermal insulation products for building applications. Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) |
| UNI EN 16566 : 2014 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
| I.S. EN 16566:2014 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
| BS EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| UNI EN 1062-3 : 2008 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
| 13/30276214 DC : 0 | BS EN 16566 - PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
| 06/30096144 DC : 0 | EN 998-3 - SPECIFICATION FOR MORTAR FOR MASONRY - PART 3: RENDERING AND PLASTERING MORTAR WITH ORGANIC POLYMER BINDING AGE |
| DIN EN 15824 E : 2017 | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| EN 13300:2001 | Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification |
| BS EN 1062-7:2004 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of crack bridging properties |
| ISO 7783-2:1999 | Paints and varnishes Coating materials and coating systems for exterior masonry and concrete Part 2: Determination and classification of water-vapour transmission rate (permeability) |
| BS EN 1062-3:2008 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of liquid water permeability |
| BS EN 1062-6:2002 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of carbon dioxide permeability |
| EN 16105:2011 | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
| EN 16566:2014 | Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
| EN 16383:2016 | Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) |
| EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| EN ISO 7783-2:1999 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999) |
| 15/30320410 DC : 0 | BS EN 16383 - THERMAL INSULATION PRODUCTS FOR BUILDINGS APPLICATIONS - DETERMINATION OF THE HYGROTHERMAL BEHAVIOUR OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERS (ETICS) |
| DIN EN 16105:2011-12 | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
| UNE-EN 16566:2014 | Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
| DIN EN 15824:2015-11 (Draft) | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| UNI EN 16105 : 2011 | PAINTS AND VARNISHES - LABORATORY METHOD FOR DETERMINATION OF RELEASE OF SUBSTANCES FROM COATINGS IN INTERMITTENT CONTACT WITH WATER |
| UNE-EN 16105:2012 | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
| I.S. EN 15824:2017 | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| DIN EN 1062-3:2008-04 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
| DIN EN 1062-7:2004-08 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
| BS EN 13300:2001 | Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification |
| BS EN ISO 7783-2:1999 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination and classification of water-vapour transmission rate (permeability) |
| DIN EN 15824:2017-09 | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| EN 1062-6:2002 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
| EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
| ISO 7783-2:1999 | Paints and varnishes Coating materials and coating systems for exterior masonry and concrete Part 2: Determination and classification of water-vapour transmission rate (permeability) |
| EN ISO 787-18 : 1995 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 18: DETERMINATION OF RESIDUE ON SIEVE - MECHANICAL FLUSHING PROCEDURE |
| ISO 3233:1998 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
| EN 971-1 : 1996 | PAINTS AND VARNISHES - TERMS AND DEFINITIONS FOR COATING MATERIALS - PART 1: GENERAL TERMS |
| EN ISO 1524:2013 | Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
| ISO 787-7:2009 | General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure |
| ISO 787-18:1983 | General methods of test for pigments and extenders — Part 18: Determination of residue on sieve — Mechanical flushing procedure |
| EN 1062-11:2002/AC:2005 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 11: METHODS OF CONDITIONING BEFORE TESTING |
| EN 1062-6:2002 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
| EN ISO 7783-2:1999 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999) |
| ISO 1524:2013 | Paints, varnishes and printing inks Determination of fineness of grind |
| EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| EN 1062-7:2004 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.