EN 1074-1:2000
Current
The latest, up-to-date edition.
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements
04-19-2000
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Design requirements
4.1 Materials
4.2 DN
4.3 Pressures
4.4 Temperatures
4.5 Design of the shell and obturator
4.6 End types and interchangeability
4.7 Operating direction
4.8 Maximum water velocity
4.9 All materials, including lubricants, in contact
with water intended for human consumption
4.10 Internal corrosion and ageing resistance
4.11 External corrosion and ageing resistance
5 Performance requirements
5.1 Mechanical strength
5.2 Leak-tightness
5.3 Hydraulic or airflow characteristics
5.4 Resistance to disinfection products
5.5 Endurance
6 Conformity assessment
6.1 General
6.2 Type tests
6.3 Control of production process and quality system
7 Marking
8 Packaging
Annex A (normative) Test method for the resistance to
internal pressure of the shell and of all
pressure containing components
Annex B (normative) Test methods for the resistance of the
obturator to differential pressure
Annex C (normative) Test method for the resistance of valves
to bending
Annex D (normative) Minimal test method for the leak-
tightness to external pressure of the shell
and all pressure containing components
Annex E (normative) Test method for the resistance to
disinfection products
This European Standard defines the minimum fitness for purpose requirements for valves to be used in, or connected to, water supply pipe systems above or below ground (see prEN 805, including the meter valves), and also suitable for pipe systems carrying raw or treated water (e.g. for irrigation, for fire fighting).
| Committee |
CEN/TC 69
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 1074-1 : 2000 | Identical |
| NF EN 1074-1 : 2000 | Identical |
| I.S. EN 1074-1:2000 | Identical |
| SN EN 1074-1 : 2000 | Identical |
| NS EN 1074-1 : 1ED 2000 | Identical |
| NBN EN 1074-1 : 2000 | Identical |
| PN EN 1074-1 : 2002 | Identical |
| BS EN 1074-1:2000 | Identical |
| UNE-EN 1074-1:2001 | Identical |
| UNI EN 1074-1 : 2001 | Identical |
| DIN EN 1074-1:2000-07 | Identical |
| I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| DIN EN 14267 E : 2004 | IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS |
| BS EN 12201-4:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Valves |
| BS EN 1074-4:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Air valves |
| BS EN 14267:2004 | Irrigation techniques. Irrigation hydrants |
| DIN EN 13244-4:2003-04 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 4: VALVES |
| EN 12201-4:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
| EN 1074-3:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves |
| EN 1074-4:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves |
| EN 13244-4:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves |
| EN 1074-5:2001 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves |
| I.S. EN 13244-4:2002 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - VALVES |
| DIN EN 14267:2004-10 | IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS |
| DIN EN 14384:2005-10 | PILLAR FIRE HYDRANTS |
| DIN EN 14339:2005-10 | UNDERGROUND FIRE HYDRANTS |
| BS EN 13244-4:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Valves |
| I.S. EN 12201-4:2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 4: VALVES FOR WATER SUPPLY SYSTEMS |
| I.S. EN 1074-6:2009 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| DIN EN 1074-6:2009-03 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| BS EN 1074-3:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Check valves |
| UNI EN 14384 : 2006 | PILLAR FIRE HYDRANTS |
| UNI EN 12201-4 : 2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 4: VALVES FOR WATER SUPPLY SYSTEMS |
| UNI EN 1074-6 : 2009 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| 16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| UNE-EN 12201-4:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
| BS EN 1074-5:2001 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Control valves |
| UNE-EN 1074-6:2011 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants |
| BS EN 1074-2:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Isolating valves |
| BS EN 1074-6:2008 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Hydrants |
| EN 14384:2005 | Pillar fire hydrants |
| EN 14339:2005 | Underground fire hydrants |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN 14267:2004/AC:2008 | IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS |
| BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
| DIN EN 12201-4:2012-04 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
| DIN EN 14339 E : 2005 | UNDERGROUND FIRE HYDRANTS |
| DIN EN 14384 E : 2005 | PILLAR FIRE HYDRANTS |
| BS EN 14339:2005 | Underground fire hydrants |
| BS EN 14384:2005 | Pillar fire hydrants |
| EN 1074-6:2008 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants |
| DIN EN 1074-2:2004-07 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves |
| EN 1074-2:2000/A1:2004 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 2 - ISOLATING VALVES |
| EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| EN 681-1:1996/A3:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| EN 558-1 : 1995 | INDUSTRIAL VALVES - FACE-TO-FACE AND CENTRE-TO-FACE DIMENSIONS OF METAL VALVES FOR USE IN FLANGED PIPE SYSTEMS - PN-DESIGNATED VALVES |
| EN 805:2000 | Water supply - Requirements for systems and components outside buildings |
| PREN 19 : DRAFT 2014 | INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| PREN 1092-1 : DRAFT 2016 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
| PREN 12266-1 : DRAFT 2009 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| ISO/TR 9080:1992 | Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.