• There are no items in your cart

EN 12094-2:2003

Current
Current

The latest, up-to-date edition.

Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
Published date

04-23-2003

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
  4.1 General design
  4.2 Connection threads
  4.3 Signal processing and indication
  4.4 System delay
  4.5 Function at ambient temperatures
  4.6 Internal pressure
  4.7 Strength
  4.8 Operational reliability
  4.9 Corrosion
  4.10 Stress corrosion
  4.11 Vibration
  4.12 Pneumatic energy supply using pilot containers
  4.13 Operating force
  4.14 Functional reliability
  4.15 Safety classification
  4.16 Test facility
  4.17 Documentation
5 Tests
  5.1 Test conditions
  5.2 Test samples and order of tests
  5.3 Compliance
  5.4 Function
  5.5 System delay
  5.6 Temperature
  5.7 Internal pressure
  5.8 Strength
  5.9 Operational reliability
  5.10 Corrosion
  5.11 Stress corrosion
  5.12 Vibration
  5.13 Energy supply
  5.14 Operating force
  5.15 Functional reliability
6 Marking and data
7 Evaluation of conformity
  7.1 General
  7.2 Initial type testing
  7.3 Factory production control (FPC)
Annex ZA (informative) Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Directive
Bibliography

This European Standard specifies requirements and test methods for non-electric automatic control devices incorporating non-electric delay devices for CO2, inert gas- or halo-carbon-gas fire extinguishing systems. This standard is applicable for devices which may be triggered by: - an automatic fire detection installation; - an electrical control device; - a non-electrical special fire detector; - a manual triggering device or; - a combination of the above.

Committee
CEN/TC 191
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

07/30173831 DC : 0 BS EN 15004-1 - FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
04/30119106 DC : DRAFT AUG 2004 EN 14972 - FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION
UNI EN 15004-1 : 2008 FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
DIN EN 13565-2:2016-08 (Draft) FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 2: DESIGN, CONSTRUCTION AND MAINTENANCE
EN 15004-1:2008 Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2006, modified)
DIN EN 15004-1:2008-09 FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
14/30274909 DC : 0 BS EN 15004-1 - FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
ONORM EN 15004-1 : 2008 FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
I.S. EN 15004-1:2008 FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
BS EN 15004-1:2008 Fixed firefighting systems. Gas extinguishing systems Design, installation and maintenance
EN 13565-2:2009/AC:2010 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 2: DESIGN, CONSTRUCTION AND MAINTENANCE
BS EN 13565-2:2009 Fixed firefighting systems. Foam systems Design, construction and maintenance
DIN EN 13565-2:2009-09 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 2: DESIGN, CONSTRUCTION AND MAINTENANCE
BS EN 12094-1:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for electrical automatic control and delay devices
DIN EN 15004-1:2016-09 (Draft) FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
PREN 13565-2 : DRAFT 2016 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 2: DESIGN, CONSTRUCTION AND MAINTENANCE
I.S. EN 13565-2:2009 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 2: DESIGN, CONSTRUCTION AND MAINTENANCE
UNI EN 13565-2 : 2009 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 2: DESIGN, CONSTRUCTION AND MAINTENANCE
EN 12094-1:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
89/686/EEC : 1989 AMD 5 2012 COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
EN 12094-9:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
1989/336/EEC : 1989 COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
EN 12094-10:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
EN 45011:1998 General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996)
1990/384/EEC : 1990 COUNCIL DIRECTIVE OF 20 JUNE 1990 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO NON-AUTOMATIC WEIGHING INSTRUMENTS
1988/378/EEC : 1988 COUNCIL DIRECTIVE OF 3 MAY 1988 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING THE SAFETY OF TOYS
EN 45011 : 1998 GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
1973/23/EEC : 1973 COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 12094-11 : 2003 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 11: REQUIREMENTS AND TEST METHODS FOR MECHANICAL WEIGHING DEVICES
ISO 9001:2015 Quality management systems — Requirements
IEC 60068-2-42:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
92/42/EEC : 1992 AMD 5 2013 COUNCIL DIRECTIVE 92/42/EEC OF 21 MAY 1992 ON EFFICIENCY REQUIREMENTS FOR NEW HOT-WATER BOILERS FIRED WITH LIQUID OR GASEOUS FUELS
ISO/IEC Guide 65:1996 General requirements for bodies operating product certification systems
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 54-1:2011 Fire detection and fire alarm systems - Part 1: Introduction
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
1987/404/EEC : 1987 COUNCIL DIRECTIVE OF 25 JUNE 1987 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO SIMPLE PRESSURE VESSELS
1990/396/EEC : 1990 COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.