EN 12096:1997
Current
Current
The latest, up-to-date edition.
Mechanical vibration - Declaration and verification of vibration emission values
Published date
07-23-1997
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions and symbols
4 Declaration of vibration emission values
5 Presentation of declared vibration emission values
6 Verification of declared vibration emission values
Annex A (informative) Definitions of statistical terms
Annex B (informative) Guidelines for declaration of vibration
emission values
Annex C (informative) Examples of vibration emission declarations
Annex D (informative) Guidelines for verification when the
vibration emission value is declared without the
uncertainty, K
Annex E (informative) Bibliography
This European standard establishes the requirements for declaration and verification of vibration emission values. It applies to hand-arm and whole- body vibration values achieved by measurements according to type-B and Type-C standards. It gives guidance on the declaration of vibration emission values; it describes vibration and product information to be given in technical documents supplied to users by the manufacturer.
| Committee |
CEN/TC 231
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 12096:1997 | Identical |
| NF EN 12096 : 1997 | Identical |
| I.S. EN 12096:1998 | Identical |
| NEN EN 12096 : 1997 | Identical |
| PN EN 12096 : 2002 | Identical |
| SN EN 12096 : 1998 | Identical |
| UNI EN 12096 : 1999 | Identical |
| NBN EN 12096 : 1997 | Identical |
| NS EN 12096 : 1ED 1997 | Identical |
| UNE-EN 12096:1998 | Identical |
| DIN EN 12096:1997-09 | Identical |
| DIN EN ISO 28927-4:2011-05 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
| DIN EN ISO 28927-7:2010-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) |
| DIN EN ISO 11148-6:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012) |
| UNI EN ISO 11148-2 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| BS EN ISO 11148-11:2011 | Hand-held non-electric power tools. Safety requirements Nibblers and shears |
| I.S. EN ISO 28927-9:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMERS AND NEEDLE SCALERS |
| 12/30236576 DC : 0 | BS EN 12786 - SAFETY OF MACHINERY - RULES FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS |
| 12/30244749 DC : 0 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| S.R. CEN/TR 614-3:2010 | SAFETY OF MACHINERY - PART 3: ERGONOMIC PRINCIPLES FOR THE DESIGN OF MOBILE MACHINERY |
| I.S. EN 60335-2-79:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS (IEC 60335-2-79:2012 (MOD)) |
| NF EN ISO 28927-4 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
| PD CEN/TR 1030-2:2016 | Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace |
| DIN EN ISO 11148-9:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
| 08/30179253 DC : DRAFT JULY 2008 | BS EN 474-1 AMD1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 28927-1:2010-05 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS |
| NF EN ISO 11148-10 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| BS EN ISO 28927-9:2009 | Hand-held portable power tools. Test methods for evaluation of vibration emission Scaling hammers and needle scalers |
| BS EN 15954-2:2013 | Railway applications. Track. Trailers and associated equipment General safety requirements |
| UNI EN ISO 28927-11 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 11: STONE HAMMERS |
| DIN EN ISO 11148-5:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
| BS EN ISO 11148-10:2011 | Hand-held non-electric power tools. Safety requirements Compression power tools |
| ISO 13578:2017 | Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
| 08/30181096 DC : DRAFT APR 2008 | BS EN ISO 28927-9 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMERS AND NEEDLE SCALERS |
| DIN EN 15954-2:2013-11 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| 12/30244743 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 08/30182206 DC : DRAFT SEP 2008 | BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY |
| PREN 474-1 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 08/30181082 DC : DRAFT APR 2008 | BS EN ISO 28927-8 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SAWS WITH OSCILLATING OR ROTATING ACTION |
| 10/30185766 DC : 0 | BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| 08/30181072 DC : DRAFT APR 2008 | BS EN ISO 28927-7 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 7: NIBBLERS AND SHEARS |
| IEC 60335-2-79:2016 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
| I.S. EN ISO 28927-2:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUT RUNNERS AND SCREWDRIVERS (ISO 28927-2:2009) |
| 08/30169607 DC : DRAFT APR 2008 | BS EN ISO 28927-2 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUT RUNNERS AND SCREWDRIVERS |
| UNI EN ISO 28927-7 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 7: NIBBLERS AND SHEARS |
| I.S. EN ISO 11148-2:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011) |
| DIN EN ISO 28927-10:2011-07 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
| UNE-EN ISO 28927-6:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) |
| I.S. EN ISO 11148-1:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011) |
| ISO 18758-2:2018 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
| I.S. EN ISO 28927-10:2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS |
| I.S. EN ISO 11148-10:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011) |
| ISO 11148-13:2017 | Hand-held non-electric power tools Safety requirements Part 13: Fastener driving tools |
| I.S. EN ISO 11148-8:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011) |
| I.S. EN ISO 28927-12:2012 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 12: DIE GRINDERS (ISO 28927-12:2012) |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ISO 5395-1:2013 | Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests |
| NF EN ISO 10517 : 2009 AMD 1 2013 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| DIN EN 792-8:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
| DIN EN 500-1:2010-05 | Mobile road construction machinery - Safety - Part 1: Common requirements (includes Amendment A1:2009) |
| DIN EN 792-1:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| DIN EN 792-7:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| DIN EN 792-5:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| BS EN ISO 19432:2012 | Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements |
| UNE-EN 13977:2012 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| BS EN 792-10 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| BS EN 1032 : 2003 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| BS EN 12984 : 2005 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 792-2 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| UNE-EN ISO 28927-12:2013 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) |
| BS EN 792-4 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| BS EN 12853 : 2001 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12418 : 2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| I.S. EN 13977:2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| UNI EN 15746-2 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| CEN/TR 1030-2:2016 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace |
| EN 12418:2000+A1:2009 | Masonry and stone cutting-off machines for job site - Safety |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| EN 1501-1:2011+A1:2015 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
| EN 1248:2001+A1:2009 | Foundry machinery - Safety requirements for abrasive blasting equipment |
| EN 60335-2-79:2012 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
| EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
| EN ISO 20643:2008/A1:2012 | Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012) |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 11148-11:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
| DIN EN 15955-2:2013-09 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| BS EN ISO 28927-3:2009 | Hand-held portable power tools. Test methods for evaluation of vibration emission Polishers and rotary, orbital and random orbital sanders |
| I.S. EN ISO 28927-7:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 7: NIBBLERS AND SHEARS |
| UNI EN ISO 10517 : 2014 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| BS EN ISO 11148-1:2011 | Hand-held non-electric power tools. Safety requirements Assembly power tools for non-threaded mechanical fasteners |
| S.R. CEN/TR 1030-2:2016 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE |
| NF EN ISO 28927-2 : 2010 AMD 1 2017 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUTRUNNERS AND SCREWDRIVERS |
| NF EN ISO 28927-10 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS |
| UNI EN ISO 11148-1 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| 08/30181058 DC : DRAFT APR 2008 | BS EN ISO 28927-5 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| NF EN ISO 28927-3 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
| BS EN ISO 11148-12:2012 | Hand-held non-electric power tools. Safety requirements Circular, oscillating and reciprocating saws |
| 17/30341100 DC : 0 | BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS |
| 09/30187383 DC : 0 | BS ISO 11148-11 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| I.S. EN 792-9:2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| DIN EN ISO 28927-3:2010-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
| 08/30183842 DC : DRAFT JUNE 2008 | BS EN ISO 11148-6 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| 08/30183838 DC : DRAFT JUNE 2008 | BS EN ISO 11148-4 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| DIN EN ISO 16089 E : 2016 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
| EN 474-1:2006+A5:2018 | Earth-moving machinery - Safety - Part 1: General requirements |
| BS EN ISO 28927-6:2009 | Hand-held portable power tools. Test methods for evaluation of vibration emission Rammers |
| UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| BS EN 60335-2-79:2012 | Household and similar electrical appliances. Safety Particular requirements for high pressure cleaners and steam cleaners |
| DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| ISO/TR 27609:2007 | Vibration in hand-held tools Vibration measurement methods for grinders Evaluation of round-robin test |
| BS EN ISO 11148-5:2011 | Hand-held non-electric power tools. Safety requirements Rotary percussive drills |
| PREN 1889-1 : DRAFT 2010 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| NF EN ISO 28927-1 : 2010 AMD 1 2017 | HAND-HELD PORTABLE POWER TOOLS - TEST METHOD FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS |
| UNI EN ISO 11148-5 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| UNI EN ISO 11148-6 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| 09/30187493 DC : 0 | BS EN ISO 28927-10 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS |
| 01/715338 DC : DRAFT NOV 2001 | PREN 1915-3 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS |
| 08/30181068 DC : DRAFT APR 2008 | BS EN ISO 28927-6 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 6: RAMMERS |
| 09/30187371 DC : 0 | BS ISO 11148-1 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| BS EN 60745-1 : 2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| PD ISO/TR 27609:2007 | Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test |
| 09/30202532 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 02/561267 DC : DRAFT MAR 2002 | PREN 14386 - SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES FOR THE OPERABILITY OF MOBILE MACHINERY |
| 09/30202538 DC : DRAFT JUN 2009 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN ISO 28927-4:2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
| PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| NF EN ISO 11148-9 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| DIN EN ISO 11148-8:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
| I.S. EN ISO 28927-3:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
| BS EN ISO 28927-2 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUTRUNNERS AND SCREWDRIVERS |
| I.S. EN 15746-2:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 15955-2:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN ISO 28927-8:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SMALL SAWS WITH OSCILLATING OR ROTATING ACTION (ISO 28927-8:2009) |
| I.S. TS 8662-11:2004 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 11: FASTENER DRIVING TOOLS |
| UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| PREN ISO 28927-4 : DRAFT 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
| NF EN ISO 11148-11 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| EN ISO 5395-1:2013/A1:2018 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS - AMENDMENT 1: ANNEX G (VIBRATION TEST CODE - HAND-ARM VIBRATION AND WHOLE-BODY VIBRATION) (ISO 5395-1:2013/AMD 1:2017) |
| I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 792-13:2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| DIN EN 13059:2009-06 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION |
| DIN EN 1915-3:2009-06 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS AND REDUCTION |
| DIN EN 12984:2011-02 | Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12418:2010-03 | Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009) |
| DIN EN 14681:2010-10 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010) |
| DIN EN 792-12:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
| DIN EN 14656:2010-10 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
| BS EN 792-8 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| BS EN 14673 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| BS EN 792-12 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
| BS EN 792-6 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| BS EN 13218 : 2002 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| I.S. EN 12418:2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| I.S. EN 14656:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| I.S. EN 1248:2001 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| I.S. EN ISO 20643:2008 | MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005) |
| I.S. EN ISO 19432:2012 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| DIN EN 1248:2010-06 | Foundry machinery - Safety requirements for abrasive blasting equipment (includes Amendment A1:2009) |
| UNI CEN/TR 15350 : 2013 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
| DIN EN 792-3:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| DIN EN 792-2:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| DIN EN 792-6:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| DIN EN 792-4:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| I.S. EN ISO 22867:2011 | FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES (ISO 22867:2011) |
| DIN EN 13218:2010-09 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| DIN EN 792-1:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| DIN EN 792-7:2002-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| DIN EN 792-4:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| DIN EN 792-3:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| I.S. EN 1915-3:2004 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS AND REDUCTION |
| DIN EN ISO 10517:2014-03 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009 + AMD 1:2013) |
| DIN EN 792-5:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| DIN EN 792-6:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| I.S. EN 12348:2000 | CORE DRILLING MACHINES ON STAND - SAFETY |
| DIN EN 1459:2012-06 | SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED VARIABLE REACH TRUCKS |
| DIN EN 13218:2002-09 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| I.S. EN 14681:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| I.S. EN 500-1:2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| I.S. EN 1889-1:2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| I.S. EN 13059:2002 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION |
| I.S. EN 12786:2013 | SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARD |
| I.S. EN 12984:2006 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 792-9:2001-08 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| I.S. EN 12853:2001 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 792-8:2001-08 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| I.S. EN 14673:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| I.S. EN 1032:2003 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| I.S. EN 1501-1:2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
| UNI EN 792-11 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| UNI EN 792-7 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| VDI 2057 Blatt 2:2016-03 | Human exposure to mechanical vibrations - Hand-arm vibration |
| BS EN ISO 28927-5 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| UNE-EN ISO 28927-9:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
| DIN EN ISO 11148-3:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012) |
| DIN EN ISO 11148-2:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) |
| I.S. EN ISO 5395-1:2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS (ISO 5395-1:2013) |
| 09/30182200 DC : 0 | BS EN 500-1:2006/A1 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| BS EN ISO 11148-2:2011 | Hand-held non-electric power tools. Safety requirements Cutting-off and crimping power tools |
| NF EN ISO 11148-5 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY, PERCUSSIVE DRILLS |
| NF EN ISO 28927-11 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 11: STONE HAMMERS |
| DIN EN ISO 11148-12:2013-05 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
| 09/30183551 DC : 0 | BS ISO 11148-7 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| 08/30183566 DC : DRAFT JUNE 2008 | BS ISO 11148-3 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| UNE-EN ISO 28927-5:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) |
| 09/30175678 DC : 0 | BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| UNE-EN ISO 28927-11:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) |
| 09/30175681 DC : 0 | BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS EN ISO 28927-10:2011 | Hand-held portable power tools. Test methods for evaluation of vibration emission Percussive drills, hammers and breakers |
| 14/30274816 DC : 0 | BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| 14/30242985 DC : 0 | BS EN ISO 28927-8:2009/A1 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SMALL SAWS WITH OSCILLATING OR ROTATING ACTION |
| UNI EN ISO 11148-12 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS |
| I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| DIN EN ISO 28927-6:2010-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) |
| UNI EN ISO 11148-8 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| UNI EN ISO 28927-6 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 6: RAMMERS |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| BS PD ISO/TR 19664 : 2017 | HUMAN RESPONSE TO VIBRATION - GUIDANCE AND TERMINOLOGY FOR INSTRUMENTATION AND EQUIPMENT FOR THE ASSESSMENT OF DAILY VIBRATION EXPOSURE AT THE WORKPLACE ACCORDING TO THE REQUIREMENTS OF HEALTH AND SAFETY |
| NF EN 61029-1 : 2009 AMD 11 2011 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 5395-1 : 2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS |
| PREN 12786 : DRAFT 2012 | SAFETY OF MACHINERY - RULES FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS |
| I.S. CEN TR 15350:2006 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
| UNI EN ISO 11148-4 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| I.S. EN ISO 11148-3:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012) |
| UNI EN ISO 11148-9 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| DIN EN 474-1:2014-03 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 11148-12:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012) |
| EN ISO 10517:2009/A1:2013 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009/AMD 1:2013) |
| I.S. EN 474-1:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 11148-6:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012) |
| I.S. EN ISO 10517:2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009) |
| BS EN ISO 16089:2015 | Machine tools. Safety. Stationary grinding machines |
| UNI EN ISO 28927-9 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMERS AND NEEDLE SCALERS |
| ISO 16089:2015 | Machine tools Safety Stationary grinding machines |
| NF EN ISO 11148-2 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| NF EN ISO 28927-8 : 2010 AMD 1 2016 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SAWS WITH OSCILLATING OR ROTATING ACTION |
| ISO 28927-4:2010 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 4: Straight grinders |
| EN ISO 28927-1:2009/A1:2017 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS (ISO 28927-1:2009/AMD 1:2017) |
| DIN EN 12348:2010-01 | Core drilling machines on stand - Safety (includes Amendment A1:2009) |
| DIN EN 12853:2012-02 | Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12786:2013-05 | SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS |
| DIN EN ISO 20643 E : 2012 | MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005 + AMD 1:2012) |
| DIN EN 1032:2009-02 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| DIN EN 792-11:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| DIN EN ISO 19432 E : 2012 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| DIN EN 14673:2010-10 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
| UNE-EN 15954-2:2014 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| UNE-EN 1889-1:2012 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| UNE-EN 62841-1:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements |
| UNE-EN 15955-2:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| BS EN 792-5 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| ISO 28927-11:2011 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 11: Stone hammers |
| ISO 11148-4:2012 | Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools |
| DIN EN 1889-1:2011-10 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| ISO 22867:2011 | Forestry and gardening machinery Vibration test code for portable hand-held machines with internal combustion engine Vibration at the handles |
| CEN/TR 15350:2013 | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
| EN 60745-1:2009/A11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN ISO 28927-8:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) |
| EN 60745-1:2006 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 792-13:2001 | HAND-HELD NON-ELECTRIC POWER TOOLS. SAFETY REQUIREMENTS. PART 13: FASTENER DRIVING TOOLS. |
| EN ISO 19432:2012 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
| EN 792-6:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners |
| EN 792-13:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools |
| UNI EN 792-3 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| UNI EN ISO 28927-12 : 2012 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 12: DIE GRINDERS |
| UNI EN 792-12 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
| UNI EN 13059 : 2008 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION |
| UNI EN 1889-1 : 2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN 500-1 : 2010 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN 15954-2 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 13977 : 2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| UNI EN 792-2 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| UNI EN 14673 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| UNI EN 792-4 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| UNI EN 1459 : 2013 | SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED VARIABLE REACH TRUCKS |
| UNI EN 792-10 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| UNI EN 792-5 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| UNI EN 792-13 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| UNI EN 12786 : 2013 | SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS |
| UNI EN 12984 : 2010 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 19432 : 2013 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS |
| UNI EN ISO 20643 : 2012 | MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION |
| UNI EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| UNI EN 14656 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| UNI EN 1915-3 : 2012 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS AND REDUCTION |
| UNI EN 792-8 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| UNI EN 13218 : 2008 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| UNI EN 792-6 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| UNI EN 792-9 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| UNI EN 12853 : 2010 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 15955-2 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 1248 : 2009 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| UNI EN 12348 : 2009 | CORE DRILLING MACHINES ON STAND - SAFETY |
| UNI EN 1032 : 2009 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| UNI EN 792-1 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| UNI EN 14681 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| ISO/TR 19664:2017 | Human response to vibration Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety |
| NF EN ISO 28927-5 : 2010 AMD 1 2015 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| 09/30183554 DC : 0 | BS EN ISO 11148-8 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| DIN EN ISO 11148-1:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
| BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
| 15/30264711 DC : 0 | BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| DIN EN ISO 11148-4:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012) |
| BS EN ISO 11148-8:2011 | Hand-held non-electric power tools. Safety requirements Sanders and polishers |
| BS EN ISO 28927-11:2011 | Hand-held portable power tools. Test methods for evaluation of vibration emission Stone hammers |
| 16/30321757 DC : 0 | BS ISO 28927-13 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 13: FASTENER DRIVING TOOLS |
| BS EN ISO 11148-6:2012 | Hand-held non-electric power tools. Safety requirements Assembly power tools for threaded fasteners |
| 09/30180832 DC : DRAFT AUG 2009 | BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT |
| 09/30175684 DC : 0 | BS EN 14673:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| 09/30187498 DC : 0 | BS EN ISO 28927-11 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 11: STONE HAMMERS |
| ISO 28927-1:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 1: Angle and vertical grinders |
| 09/30187374 DC : 0 | BS ISO 11148-2 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| DIN EN ISO 28927-5:2015-12 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009 + AMD 1:2015) |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| UNE-CEN/TR 15172-2:2010 IN | Whole-body vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace |
| 08/30169621 DC : DRAFT APR 2008 | BS EN ISO 28927-3 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
| 08/30175652 DC : DRAFT SEP 2008 | BS EN 1248 AMD1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| ISO 10517:2009 | Powered hand-held hedge trimmers Safety |
| 02/706469 DC : DRAFT MAY 2002 | PREN ISO 20643 - HAND-TRANSMITTED VIBRATION FROM HAND-HELD OR HAND-GUIDED MACHINERY - MEASUREMENT OF VIBRATION AT THE GRIP SURFACE |
| BS EN ISO 28927-12:2012 | Hand-held portable power tools. Test methods for evaluation of vibration emission Die grinders |
| 09/30205267 DC : 0 | BS ISO 22867 - FORESTRY AND GARDEN MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES |
| 09/30169628 DC : 0 | BS EN ISO 28927-4 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
| BS EN ISO 11148-7:2012 | Hand-held non-electric power tools. Safety requirements Grinders |
| 09/30187380 DC : 0 | BS ISO 11148-10 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| BS EN 15955-2:2013 | Railway applications. Track. Demountable machines and associated equipment General safety requirements |
| PD CEN/TR 15350:2013 | Mechanical vibration. Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
| UNI EN ISO 28927-10 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS |
| 07/30171078 DC : DRAFT AUG 2007 | BS EN 61029-1 - SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 28927-9:2010-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
| DIN EN ISO 11148-10:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
| UNI EN ISO 11148-11 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| I.S. CEN/TR 15172-2:2005 | WHOLE-BODY VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE |
| BS EN 61029-1 : 2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN ISO 28927-4 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
| BS EN ISO 28927-1 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS - CUPPED WIRE BRUSHES (ISO 28927-1:2009) |
| UNI EN ISO 11148-3 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| I.S. EN 15954-2:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| BS EN ISO 28927-8 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SAWS WITH OSCILLATING OR ROTATING ACTION (ISO 28927-8:2009) |
| I.S. EN ISO 28927-1:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS (ISO 28927-1:2009) |
| S.R. CEN/TR 15350:2013 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
| BS EN 474-1 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 474-1:2006+A6:2019 | Earth-moving machinery. Safety General requirements |
| DIN EN ISO 28927-8:2016-07 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SMALL SAWS WITH OSCILLATING OR ROTATING ACTION (ISO 28927-8:2009 + AMD 1:2015) |
| DIN EN ISO 5395-1:2014-03 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS (ISO 5395-1:2013) |
| BS EN ISO 5395-1 : 2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS (ISO 5395-1:2013) |
| I.S. EN 61029-1:2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| EN ISO 28927-4:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) |
| I.S. EN 60745-1:2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 22867:2012-04 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| DIN EN 14681 E : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| DIN EN 13977:2011-04 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| DIN EN 792-13:2009-01 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| DIN EN 14673 E : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| DIN EN 14656 E : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| 12/30272980 DC : 0 | BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 12786:2013 | Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards |
| BS EN 792-11 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| ISO 11148-6:2012 | Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners |
| UNE-EN 60335-2-79:2013 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
| ISO 11148-1:2011 | Hand-held non-electric power tools Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners |
| ISO 19432:2012 | Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements |
| BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| BS EN 12786:2013 | Safety of machinery. Requirements for the drafting of the vibration clauses of safety standards |
| ISO 28927-3:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 3: Polishers and rotary, orbital and random orbital sanders |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| UNE-EN 1459:2000 | SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED VARIABLE REACH TRUCKS |
| ISO 28927-5:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 5: Drills and impact drills |
| BS EN 500-1 : 2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNE-EN ISO 22867:2012 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| BS EN 13977:2011 | Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance |
| ISO 28927-8:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action |
| ISO 11148-2:2011 | Hand-held non-electric power tools Safety requirements Part 2: Cutting-off and crimping power tools |
| UNE-EN 1248:2001 | Foundry Machinery - Safety requirements for abrasive blasting equipment. |
| ISO 11148-9:2011 | Hand-held non-electric power tools Safety requirements Part 9: Die grinders |
| CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ISO 11148-8:2011 | Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishers |
| DIN EN ISO 20643:2012-10 | Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005 + Amd. 1:2012) (includes Amendment :2012) |
| BS EN 12348 : 2000 | CORE DRILLING MACHINES ON A STAND - SAFETY |
| ISO 28927-6:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 6: Rammers |
| UNE-EN ISO 19432:2013 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
| ISO 11148-11:2011 | Hand-held non-electric power tools Safety requirements Part 11: Nibblers and shears |
| ISO 28927-7:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 7: Nibblers and shears |
| ISO 28927-9:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 9: Scaling hammers and needle scalers |
| ISO 8662-11:1999 | Hand-held portable power tools Measurement of vibrations at the handle Part 11: Fastener driving tools |
| BS EN 1248 : 2001 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| BS EN 1501-1 : 2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
| ISO 11148-5:2011 | Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills |
| ISO 28927-10:2011 | Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percussive drills, hammers and breakers |
| BS EN 792-13 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| DIN EN ISO 19432:2012-12 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| ISO 11148-7:2012 | Hand-held non-electric power tools — Safety requirements — Part 7: Grinders |
| ISO 11148-10:2011 | Hand-held non-electric power tools Safety requirements Part 10: Compression power tools |
| BS EN ISO 20643 : 2008 | MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005) |
| ISO 28927-2:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 2: Wrenches, nutrunners and screwdrivers |
| BS EN 13059 : 2002 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION |
| UNE-EN ISO 10517:2010 | Powered hand-held hedge trimmers - Safety (ISO 10517:2009) |
| ISO 28927-12:2012 | Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 12: Die grinders |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| DIN EN 792-11:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| EN ISO 28927-7:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) |
| EN 792-5:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills |
| EN ISO 11148-8:2011 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
| EN ISO 28927-11:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) |
| EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| EN 792-7:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
| EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| EN 13977:2011 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
| EN ISO 28927-6:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) |
| EN 12984:2005+A1:2010 | Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements |
| EN ISO 11148-7:2012 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) |
| EN 1459:1998+A3:2012 | Safety of industrial trucks - Self-propelled variable reach trucks |
| EN ISO 11148-6:2012 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) |
| EN ISO 11148-4:2012 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) |
| CEN ISO/TS 8662-11:2004/AC:2004 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 11: FASTENER DRIVING TOOLS |
| EN 792-10:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools |
| EN ISO 11148-12:2012 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
| EN ISO 11148-2:2011 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) |
| EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| EN ISO 11148-5:2011 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
| EN 500-1:2006+A1:2009 | Mobile road construction machinery - Safety - Part 1: Common requirements |
| EN ISO 28927-3:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
| EN 792-8:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers |
| EN 13218:2002+A1:2008/AC:2010 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| EN ISO 11148-1:2011 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
| EN 14681:2006+A1:2010 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
| EN 1889-1:2011 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| EN ISO 11148-3:2012 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) |
| EN ISO 11148-11:2011 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
| EN 1915-3:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
| EN ISO 28927-12:2012 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) |
| EN 792-4:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools |
| EN ISO 28927-9:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
| EN 792-11:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears |
| EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
| EN 792-1:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| EN ISO 16089:2015 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
| EN 792-9:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
| EN ISO 11148-9:2011 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
| EN 792-2:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools |
| EN 792-3:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers |
| EN 792-12:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws |
| EN 13059:2002+A1:2008 | Safety of industrial trucks - Test methods for measuring vibration |
| EN ISO 11148-10:2011 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
| EN ISO 28927-2:2009/A1:2017 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017) |
| UNE-EN ISO 28927-10:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
| 09/30183560 DC : 0 | BS ISO 11148-12 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS |
| UNI EN ISO 11148-7 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| I.S. EN ISO 11148-9:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011) |
| UNI EN ISO 28927-3 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
| BS EN ISO 11148-3:2012 | Hand-held non-electric power tools. Safety requirements Drills and tappers |
| BS EN ISO 28927-7:2009 | Hand-held portable power tools. Test methods for evaluation of vibration emission Nibblers and shears |
| 10/30227635 DC : 0 | BS EN ISO 28927-12 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 12: DIE GRINDERS |
| DIN EN ISO 28927-11:2011-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) |
| I.S. EN ISO 11148-4:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012) |
| 09/30187377 DC : 0 | BS ISO 11148-5 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| I.S. EN 792-7:2002 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| 08/30182209 DC : DRAFT SEP 2008 | BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| 08/30169617 DC : DRAFT APR 2008 | BS EN ISO 28927-1 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS |
| DIN EN ISO 11148-7:2013-01 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012) |
| UNE-CEN/TR 15350:2013 IN | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
| BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| BS EN ISO 11148-9:2011 | Hand-held non-electric power tools. Safety requirements Die grinders |
| 14/30258503 DC : 0 | BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| UNE-EN ISO 28927-3:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
| DIN EN ISO 28927-12:2013-02 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) |
| UNE-EN ISO 28927-4:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) |
| PD CEN/TR 614-3:2010 | Safety of machinery Ergonomic principles for the design of mobile machinery |
| BS EN ISO 11148-4:2012 | Hand-held non-electric power tools. Safety requirements Non-rotary percussive power tools |
| DIN EN 15746-2:2016-02 (Draft) | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015 |
| BS ISO 22867:2004 | Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles |
| NF EN ISO 28927-9 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMARS AND NEEDLE SCALERS |
| 03/112608 DC : DRAFT AUG 2003 | ISO 22867 - PORTABLE HAND-HELD FORESTRY MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION TEST CODE - MEASUREMENT OF VIBRATION AT THE HANDLES |
| PD CEN/TR 15172-2:2005 | Whole-body vibration. Guidelines for vibration hazards reduction Management measures at the workplace |
| NF EN ISO 11148-8 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| UNE-EN ISO 28927-7:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) |
| BS EN ISO 10517 : 2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| I.S. EN ISO 11148-7:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012) |
| I.S. EN ISO 11148-11:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011) |
| BS EN ISO 28927-4 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
| NF EN ISO 28927-6 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 6: RAMMERS |
| BS EN 15746-2 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN ISO 28927-5:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009) |
| NF EN ISO 11148-1 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| DIN EN ISO 16089:2016-06 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
| NF EN ISO 28927-7 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 7: NIBBLERS AND SHEARS |
| I.S. EN ISO 16089:2015 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014) |
| 15/30279801 DC : 0 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN ISO 11148-10 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| I.S. EN ISO 11148-5:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011) |
| I.S. EN ISO 28927-6:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 6: RAMMERS |
| DIN EN 1501-1:2016-03 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles (includes Amendment A1:2015) |
| DIN EN 792-2:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| DIN EN 1889-1 E : 2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| DIN EN 792-9:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| DIN EN 792-10:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| BS EN 792-1 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| BS EN 1889-1:2011 | Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles |
| BS EN 792-3 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| BS EN 14656 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS EN 1459 : 1999 | SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED VARIABLE REACH TRUCKS |
| ISO 20643:2005 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
| BS EN 1915-3 : 2004 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS AND REDUCTION |
| BS EN ISO 22867:2008 | Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles |
| ISO 11148-3:2012 | Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers |
| BS EN 792-9 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| BS EN 14681 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| BS EN 792-7 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| ISO 11148-12:2012 | Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws |
| EN 12853:2001+A1:2010/AC:2010 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 12786:2013 | Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards |
| EN 61029-1:2009/A11:2010 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CEN/TR 614-3:2010 | Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery |
| EN ISO 22867:2011 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| EN 12348:2000+A1:2009 | Core drilling machines on stand - Safety |
| CEN/TR 15172-2:2005 | Whole-body vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace |
| DIN EN 792-12:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
| EN ISO 28927-5:2009/A1:2015 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009/AMD 1:2015) |
| DIN EN 15746-2:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011) |
| DIN EN 792-10:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| UNE-EN 15746-2:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| UNE-EN 500-1:2007 | Mobile road construction machinery - Safety - Part 1: Common requirements |
| UNE-EN 1501-1:2012 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
| ISO 7574-2:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 2: Methods for stated values for individual machines |
| ISO 5349:1986 | Mechanical vibration — Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration |
| EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
| ISO 7574-4:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines |
| EN 28662-2 : 94 AMD 2 2001 | HAND HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 2: CHIPPING HAMMERS AND RIVETING HAMMERS |
| EN 1033 : 1995 | HAND-ARM VIBRATION - LABORATORY MEASUREMENT OF VIBRATION AT THE GRIP SURFACE OF HAND-GUIDED MACHINERY - GENERAL |
| ISO 8662-2:1992 | Hand-held portable power tools Measurement of vibrations at the handle Part 2: Chipping hammers and riveting hammers |
| EN 27574-2 : 1988 | ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - PART 2: METHODS FOR STATED VALUES FOR INDIVIDUAL MACHINES |
| ENV 28041 : DRAFT 1993 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
| ISO 8041:2005 | Human response to vibration Measuring instrumentation |
| EN 28662-1:1992 | HAND HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - GENERAL |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| EN 27574-4 : 1988 | ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - PART 4: METHODS FOR STATED VALUES FOR BATCHES OF MACHINES |
| ISO 8662-1:1988 | Hand-held portable power tools Measurement of vibrations at the handle Part 1: General |
| ENV 25349 : 1992 | MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT AND THE ASSESSMENT OF HUMAN EXPOSURE TO HAND TRANSMITTED VIBRATION (ISO 5349:1986) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.