• There are no items in your cart

EN 12168:2016

Current
Current

The latest, up-to-date edition.

Copper and copper alloys - Hollow rod for free machining purposes
Published date

07-20-2016

European Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, packaging, labeling
Bibliography

This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy hollow rod, finally produced by drawing or extruding, specifically intended for free machining purposes.NOTEHollow products having an outside diameter greater than 80 mm and/or a wall thickness less than 2 mm are specified in EN 12449.The sampling procedures, the methods of test for verification of conformity to the requirements of this European Standard, are also specified.

Committee
CEN/TC 133
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
DIN EN 12168:2000-09 Identical
I.S. EN 12168:2016 Identical
NS EN 12168 : 2016 Identical
UNI EN 12168:2016 Identical
DIN EN 12168:2015-12 (Draft) Identical
NEN EN 12168 : 2016 Identical
UNE-EN 12168:2017 Identical
BS EN 12168:1998 Identical
NF EN 12168 : 2016 Identical
SN EN 12168:2016 Identical
UNI EN 12168 : 2011 Identical
SS-EN 12168:2016 Identical
PN EN 12168 : 2016 Identical
NBN EN 12168 : 2011 Identical
BS EN 12168:2016 Identical

EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
17/30350901 DC : 0 BS EN 215 - THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
05/30134037 DC : 0 EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
DIN EN 12449:2015-11 (Draft) COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
BS EN 16617:2015 Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking
DIN EN 16617:2015-07 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
DIN 3523:2001-04 Fittings for drinking water installations - Extensions
DIN CEN/TS 13547:2007-02 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
07/30168082 DC : 0 BS EN 1173 - COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION
UNE-EN 13547:2014 Industrial valves - Copper alloy ball valves
DD CEN/TS 13388:2008 Copper and copper alloys. Compendium of compositions and products
DIN 30690-1:2016-04 CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS
I.S. EN 13547:2013 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
PD CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications Design method
I.S. EN 215:2004 THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
BS EN 12288:2010 Industrial valves. Copper alloy gate valves
UNE-EN 331:2016 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
I.S. EN 12288:2010 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
I.S. EN 14424:2013 HOSE FITTINGS WITH SCREWED FERRULES
EN 12288:2010 Industrial valves - Copper alloy gate valves
EN 1173:2008 Copper and copper alloys - Material condition designation
EN 13547:2013 Industrial valves - Copper alloy ball valves
CEN/TS 13547:2006 Industrial valves - Copper alloy ball valves
I.S. EN 12449:2016 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
PREN 1503-4 : DRAFT 2015 VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS
11/30239433 DC : 0 BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
ASTM F 2854 : 2010 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
DD CEN/TS 13547:2006 Industrial valves. Copper alloy ball valves
EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
ISO 6509-2:2017 Corrosion of metals and alloys Determination of dezincification resistance of copper alloys with zinc Part 2: Assessment criteria
S.R. CEN/TS 13388:2015 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
I.S. EN 16617:2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
I.S. EN 14423:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
BS EN 12449:2016 Copper and copper alloys. Seamless, round tubes for general purposes
PD CEN/TS 13388:2015 Copper and copper alloys. Compendium of compositions and products
DIN EN 12516-4:2015-01 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
DIN EN 12288:2010-10 Industrial valves - Copper alloy gate valves
DIN EN 14422:2013-09 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
DIN EN 14424:2013-09 HOSE FITTINGS WITH SCREWED FERRULES
DIN EN 1173:2008-08 Copper and copper alloys - Material condition designation
I.S. EN 331:2015 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
I.S. EN 14422:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
I.S. EN 1173:2008 COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION
I.S. EN 1503-4:2016 VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS
DIN SPEC 9700 E : 2013 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
PREN 12516-4 : DRAFT 2011 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
I.S. EN 12516-4:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
09/30205880 DC : DRAFT OCT 2009 BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
10/30234607 DC : 0 BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES
11/30249111 DC : 0 BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
15/30322049 DC : DRAFT MAY 2015 BS EN 1503-4 - VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS
UNI EN 12516-4 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
PD 6641:1999 Copper and copper alloys. Compendium of compositions and products
UNI EN 13547 : 2013 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
I.S. CEN TS 13547:2006 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
DIN EN 331:2016-04 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
DIN EN 14424 E : 2013 HOSE FITTINGS WITH SCREWED FERRULES
DIN EN 14422 E : 2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
UNE-EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
UNI EN 12288 : 2010 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
UNI EN 14424 : 2013 HOSE FITTINGS WITH SCREWED FERRULES
UNI EN 1173 : 2008 COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION
UNI EN 14422 : 2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
DIN EN 13547:2013-12 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
PREN 14424 : DRAFT 2010 HOSE FITTINGS WITH SCREWED FERRULES
BS EN 13547:2013 Industrial valves. Copper alloy ball valves
10/30234634 DC : 0 BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
BS EN 12516-4 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
UNE-EN 16617:2015 Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking
ONORM EN 215 : 2006 THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
PREN 12288 : DRAFT 2009 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
S.R. CEN/TR 14585-3:2017 CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD
ASTM F 2854 : 2010 : R2016 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
PREN 12449 : DRAFT 2011 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
UNE-EN 14423:2014 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
EN 12861:2018 Copper and copper alloys - Scrap
I.S. EN 12861:1999 COPPER AND COPPER ALLOYS - SCRAP
I.S. CEN TS 13388:2004 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
DIN EN 215:2007-11 THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
DIN EN 1503-4:2016-06 VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS
UNE-CEN/TS 13388:2010 EX Copper and copper alloys - Compendium of compositions and products
BS EN 215:2004 Thermostatic radiator valves. Requirements and test methods
BS EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
BS EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
CEN/TS 13388:2015 Copper and copper alloys - Compendium of compositions and products
UNE-EN 14422:2014 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
BS EN 14424:2013 Hose fittings with screwed ferrules
UNE-EN 14424:2014 Hose fittings with screwed ferrules
EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
EN 14424:2013 Hose fittings with screwed ferrules
EN 215 : 2004 AMD 1 2006 THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
EN 16617 : 2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications - Part 3: Design method
PREN 14422 : DRAFT 2010 CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES
10/30234604 DC : 0 BS EN 14424 - HOSE FITTINGS WITH SCREWED FERRULES
DIN EN 16617 E : 2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
UNE-EN 12516-4:2016 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
DIN CEN/TS 13388 E : 2013 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
BS EN 14423:2013+A2:2019 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
BS EN 1503-4:2016 Valves. Materials for bodies, bonnets and covers Copper alloys specified in European Standards
BS EN 1173:2008 Copper and copper alloys. Material condition designation
DIN CEN/TS 13388;DIN SPEC 9700:2013-05 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
EN 1655:1997 Copper and copper alloys - Declarations of conformity
EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ISO 6509-1:2014 Corrosion of metals and alloys Determination of dezincification resistance of copper alloys with zinc Part 1: Test method
EN ISO 80000-1:2013 Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011)
EN 1412:2016 Copper and copper alloys - European numbering system
ISO 1190-1:1982 Copper and copper alloys Code of designation Part 1: Designation of materials
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
ISO 1811-2:1988 Copper and copper alloys Selection and preparation of samples for chemical analysis Part 2: Sampling of wrought products and castings
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
EN 1173:2008 Copper and copper alloys - Material condition designation
EN ISO 6509-1:2014 Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 10204:2004 Metallic products - Types of inspection documents
ISO 80000-1:2009 Quantities and units — Part 1: General
ISO 9001:2015 Quality management systems — Requirements
ISO 6957:1988 Copper alloys Ammonia test for stress corrosion resistance
EN 12163:2016 Copper and copper alloys - Rod for general purposes

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.