EN 12417:2001+A2:2009/AC:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
MACHINE TOOLS - SAFETY - MACHINING CENTRES
Amendment of
Superseded date
02-23-2022
Published date
01-12-2013
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of safety requirements and/or protective
measures
7 Information for use
Annex A (normative) Guards on machines centres - Impact
test method
Annex B (informative) Equipment of test method
Annex C (informative) Illustrative figures used as examples
Annex D (normative) Noise emission measurement
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC, amended by Directive 98/79/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Provides the technical safety requirements and protective measures to be adopted by persons undertaking the design, construction and supply of machining centres.
| Committee |
TC 143
|
| DevelopmentNote |
2001 Edition Re-Issued in February 2009 & incorporates AMD 2 2009. (03/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NS EN 12417 : 2001 AC 2010 | Identical |
| UNI EN 12417 : 2009 | Identical |
| NEN EN 12417 : 2001 + A2/C1 2010 | Identical |
| DIN EN 12417:2009-07 | Identical |
| GOST EN 12417 : 2006 | Identical |
| UNE-EN 12417:2002 | Identical |
| NF EN 12417 : 2001 + A2 2009 | Identical |
| I.S. EN 12417:2001 | Identical |
| BS EN 12417 : 2001 | Identical |
| SN EN 12417 : 2001 CORR 2010 | Identical |
| NBN EN 12417 : 2001 COR 2010 | Identical |
| PN EN 12417 : 2003 + A2 2011 | Identical |
| UNE-EN 12417:2002+A2:2009 | Identical |
| BS EN 12417:2001+A2:2009 | Identical |
| I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
| DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNE-EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
| UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| 07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
| BS EN ISO 23125:2015 | Machine tools. Safety. Turning machines |
| BS EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
| ISO 23125:2015 | Machine tools Safety Turning machines |
| BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| EN 14070:2003+A1:2009/AC:2010 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| I.S. EN ISO 23125:2015 | MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015) |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 12626 : 1997 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - SAFETY REQUIREMENTS |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| EN 12413:2007+A1:2011 | Safety requirements for bonded abrasive products |
| ISO 11161:2007 | Safety of machinery — Integrated manufacturing systems — Basic requirements |
| EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| ISO 513:2012 | Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| ISO 7250:1996 | Basic human body measurements for technological design |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN 12415:2000/A1:2002 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 1550:1997+A1:2008 | Machine-tools safety - Safety requirements for the design and construction of work holding chucks |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN ISO 15641:2001 | Milling cutters for high speed machining - Safety requirements (ISO 15641:2001) |
| EN 50081-2:1993 | Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment |
| ISO 15641:2001 | Milling cutters for high speed machining — Safety requirements |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| PREN 13236 : DRAFT 2017 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN ISO 7250 : 1997 | BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN |
| EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| ISO 2806:1994 | Industrial automation systems — Numerical control of machines — Vocabulary |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 11553:1996 | Safety of machinery — Laser processing machines — Safety requirements |
| EN 457 : 1992 | SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| IEC 61000-6-2 : 3.0:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
| IEC 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| EN 692:2005+A1:2009 | Machine tools - Mechanical presses - Safety |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.