EN 12812:2008
Current
Current
The latest, up-to-date edition.
Falsework - Performance requirements and general design
Published date
07-16-2008
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Design classes
5 Materials
6 Brief
7 Design requirements
8 Actions
9 Structural design for classes B1 and B2
Annex A (informative) - Relation with site activities
Annex B (informative) - Friction coefficients
Bibliography
This European Standard specifies performance requirements and limit state design methods for two design classes of falsework.It sets out the rules that have to be taken into account to produce a safe falsework structure.It also provides information where falsework is required to support a "permanent structure", or where the design or supply of falsework has to be commissioned.This European Standard also gives information on foundations.This European Standard does not specify requirements for formwork, although formwork may be a part of the falsework construction. Nor does it provide information on access and working scaffolds, which is given in EN 12811-1.This European Standard does not provide information about site activities. It does not provide information about the use of some standardized products, including timber formwork beams conforming to EN 13377 and props conforming to EN 1065.
| Committee |
CEN/TC 53
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 12812:2008-12 | Identical |
| I.S. EN 12812:2008 | Identical |
| BS EN 12812:2008 | Identical |
| NEN EN 12812 : 2008 | Identical |
| NF EN 12812 : 2008 | Identical |
| SN EN 12812 : 2008 | Identical |
| UNI EN 12812 : 2008 | Identical |
| NBN EN 12812 : 2009 | Identical |
| NS EN 12812 : 2ED 2008 | Identical |
| PN EN 12812 : 2008 | Identical |
| UNE-EN 12812:2008 | Identical |
| DIN EN 16508 E : 2016 | TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| DIN EN 16508:2016-02 | TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| I.S. EN 74-1:2005 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES |
| PD ISO/TR 12603:2010 | Building construction machinery and equipment. Classification |
| 07/19978687 DC : 0 | BS EN 74-2 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| I.S. EN 74-2:2008 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| UNI EN 74-2 : 2009 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| UNE-EN 74-2:2010 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| I.S. EN 1991-1-6:2005 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION |
| DIN EN 12813:2004-09 | Temporary works equipment - Loadbearing towers of prefabricated components - Particular methods of structural design |
| BS EN 12813:2004 | Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design |
| EN 12813:2004 | Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural design |
| DIN EN 16031:2012-09 | ADJUSTABLE TELESCOPIC ALUMINUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS |
| DIN EN 13670:2011-03 | Execution of concrete structures |
| BS EN 13670:2009 | Execution of concrete structures |
| BS EN 16031:2012 | Adjustable telescopic aluminium props. Product specifications, design and assessment by calculation and tests |
| DIN EN 74-1:2005-12 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
| 09/30211977 DC : 0 | BS EN 16031 - ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS |
| I.S. EN 13670:2009 | EXECUTION OF CONCRETE STRUCTURES |
| BS EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures |
| ISO/TR 12603:2010 | Building construction machinery and equipment Classification |
| DIN EN 1991-1-6:2010-12 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS, ACTIONS DURING EXECUTION |
| UNI EN 1991-1-6 : 2005 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION |
| ONORM EN 74-1 : 2006 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES |
| I.S. EN 16031:2012 | ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS |
| UNI EN 16031 : 2012 | ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS |
| I.S. EN 16508:2015 | TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| BS EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Part 1: Couplers for tubes - Requirements and test procedures |
| UNE-EN 13670:2013 | Execution of concrete structures |
| BS EN 1991-1-6:2005 | Eurocode 1. Actions on structures General actions. Actions during execution |
| EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| EN 16508:2015 | Temporary works equipment - Encapsulation constructions - Performance requirements and general design |
| EN 1991-1-6:2005/AC:2013 | Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution |
| EN 16031:2012 | Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests |
| EN 13670:2009 | Execution of concrete structures |
| EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
| BS EN 16508:2015 | Temporary works equipment. Encapsulation constructions. Performance requirements and general design |
| DIN EN 74-2:2009-01 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| UNI EN 13670 : 2010 | EXECUTION OF CONCRETE STRUCTURES |
| UNE-EN 16031:2013 | Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests |
| UNE-EN 1991-1-6:2018 | Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution. |
| EN 12811-1:2003 | Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design |
| EN 13377:2002 | Prefabricated timber formwork beams - Requirements, classification and assessment |
| EN 39:2001 | Loose steel tubes for tube and coupler scaffold - Technical delivery conditions |
| EN 12811-3:2002 | Temporary works equipment - Part 3: Load testing |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| EN 1065:1998 | Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests |
| BS EN 12811-1:2003 | Temporary works equipment Scaffolds. Performance requirements and general design |
| BS EN 13670:2009 | Execution of concrete structures |
| EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| EN 74-3:2007 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures |
| BS 5975(2008) : 2008 | CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
| DIN 18218:2010-01 | Pressure of fresh concrete on vertical formwork |
| EN 12810-1:2003 | Façade scaffolds made of prefabricated components - Part 1: Products specifications |
| EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
| EN 1993-1-1:2005/A1:2014 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| EN 12813:2004 | Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural design |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.