Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • There are no items in your cart
Please enter a keyword to search
Advanced search

EN 13000:2010+A1:2014

Current
Current

The latest, up-to-date edition.

Cranes - Mobile cranes
Published date

05-14-2014

Publisher

Comite Europeen de Normalisation

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
5 Verification
6 Information for use
7 Marking
Annex A (normative) - Examples of mobile crane types
Annex B.1 (informative) - Major parts of telescopic cranes
Annex B.2 (informative) - Major parts of lattice boom cranes
Annex C (normative) - List of hazards
Annex D (normative) - Load effects of combined motions
Annex E (normative) - Crane operator's seat dimensions
Annex F (normative) - Rigid body stability: Load effects
        due to acceleration
Annex G.1 (normative) - Noise test code for mobile cranes
Annex G.2 (normative) - Noise measurement, test report
Annex H (normative) - Limit values for structural and fine
        grain steel types
Annex J.1 (normative) - Minimum requirements for
           specification of hoist/derrick gears
Annex K.1 (normative) - Minimum requirements for the
           specification of lifting hooks
Annex L (normative) - Proof of competence
Annex M (normative) - Test of steering systems for
        off-road mobile cranes
Annex N.1 (informative) - Wind speed as a function of
          Elevation
Annex P (normative) - Efficiency of sheave sets
Annex Q (informative) - Manufacturer's sign
Annex R (normative) - Certificate for wire rope, requirements
Annex S (normative) - Certificate for chain, requirements
Annex T (informative) - Test procedures: Selection of load
        cases
Annex U (normative) - Test certificate
Annex V (informative) - Additional information of the
        concept of the limiting and indicating device
Annex W (informative) - Selection of a suitable set of
        crane standards for a given application
Annex ZA (informative) - Relation between this European
         Standard and the Essential Requirements of
         EU Directive 2006/42/EC
Bibliography

This European Standard is applicable to the design, construction, installation of safety devices, information for use, maintenance and testing of mobile cranes as defined in ISO 4306 2. Examples of mobile crane types are given in Annex A.This European Standard does not apply to:-loader cranes (see EN 12999)-off-shore cranes (see EN 13852 1)-floating cranes (see EN 13852 2)-variable reach truck (see EN 1459)NOTE 1 Variable Reach Trucks are commonly known as telehandlers.-mobile self-erecting tower cranes-earth-moving machinery used for object handling (see EN 474-series).This standard does not cover hazards related to the lifting of persons.NOTE 2The use of mobile cranes for the lifting of persons is subject to specific national regulations.Mobile cranes covered by this European Standard are designed for a limited number of stress cycles and particular properties of motions, e.g. smooth application of the driving forces and loading conditions according to ISO 4301 2:1985, group A1.For a duty cycle such as grab, magnet or similar work, additional provisions are required which are outside the scope of this European Standard.The hazards covered by this European Standard are identified by Annex C.This document is not applicable to mobile cranes which are manufactured before the date of publication of this document by CEN.

DevelopmentNote
Supersedes PREN 13000. (11/2010) 2010 Edition Re-Issued in May 2014 & incorporates AMD 1 2014. (06/2014)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

11/30236563 DC : 0 BS EN 16228-4 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT
12/30244749 DC : 0 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 16228-5:2014-10 Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
DIN EN 16228-4:2014-10 Drilling and foundation equipment - Safety - Part 4: Foundation equipment
BS EN 12999 : 2011 CRANES - LOADER CRANES
SAE AS 13004 : 2017 PROCESS FAILURE MODE AND EFFECTS ANALYSIS (PFMEA) AND CONTROL PLANS
14/30258503 DC : 0 BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
UNE-EN 16851:2017 Cranes - Light crane systems
12/30244743 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNE-EN 1459-2:2016 Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
DIN EN 1459-2 E : 2016 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
DIN EN 15746-2:2016-02 (Draft) Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
BS EN 1459-2 : 2015 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
BS EN 13001-1:2015 Cranes. General design General principles and requirements
UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
EN 16228-4:2014 Drilling and foundation equipment - Safety - Part 4: Foundation equipment
DIN EN 15954-2:2013-11 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
DIN EN 15955-2:2013-09 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS EN 14033-3 : 2009 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
BS EN 16228-4:2014 Drilling and foundation equipment. Safety Foundation equipment
UNI EN 16228-4 : 2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT
BS EN 16851:2017 Cranes. Light crane systems
PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 12999:2011 CRANES - LOADER CRANES
UNE-EN 16228-5:2015 Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 15955-2:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 12999:2013-02 CRANES - LOADER CRANES
EN 12999:2011+A2:2018 Cranes - Loader cranes
EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
EN 16851:2017 Cranes - Light crane systems
I.S. EN 13001-1:2015 CRANES - GENERAL DESIGN - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
VDI 2381 Blatt 2:2009-07 Final inspection of mobile cranes - Instructional form for experts
VDI 3570:2013-08 Overload safeguards for cranes
BS EN 15954-2:2013 Railway applications. Track. Trailers and associated equipment General safety requirements
BS EN 130300:1998 Harmonized system of quality assessment for electronic components. Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte
I.S. EN 16851:2017 CRANES - LIGHT CRANE SYSTEMS
NF EN 15746-2 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 16228-5:2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 5: DIAPHRAGM WALLING EQUIPMENT
DIN EN 13001-1:2015-06 CRANES - GENERAL DESIGN - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
UNE-EN 15954-2:2014 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
UNE-EN 15955-2:2014 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
UNE-EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements
CSA Z150 : 2016 SAFETY CODE ON MOBILE CRANES
UNI EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
PREN 474-12 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
I.S. EN 16228-4:2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT
BS EN 16228-5:2014 Drilling and foundation equipment. Safety Diaphragm walling equipment
05/30082472 DC : DRAFT AUG 2005 BS 7121-1 - CODE OF PRACTICE FOR SAFE USE OF CRANES - PART 1: GENERAL
BS EN 15955-2:2013 Railway applications. Track. Demountable machines and associated equipment General safety requirements
I.S. EN 1459-2:2015 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
UNI EN 16228-5 : 2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 5: DIAPHRAGM WALLING EQUIPMENT
DIN EN 16851:2015-05 (Draft) CRANES - LIGHT CRANE SYSTEMS
I.S. EN 15954-2:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
EN 1459-2:2015 Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
EN 15955-2:2013 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
EN 14033-3:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
DIN EN 16851 E : 2017 CRANES - LIGHT CRANE SYSTEMS
UNE-EN 16228-4:2015 Drilling and foundation equipment - Safety - Part 4: Foundation equipment
11/30236567 DC : 0 BS EN 16228-5 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 5: DIAPHRAGM WALLING EQUIPMENT
07/30172833 DC : DRAFT DEC 2007 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
09/30202538 DC : DRAFT JUN 2009 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 14033-3:2014-08 (Draft) RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
I.S. EN 14033-3:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
07/30164729 DC : 0 BS EN 12999 - CRANES - LOADER CRANES
BS EN 15746-2 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNE-EN 12999:2011 Cranes - Loader cranes
15/30279801 DC : 0 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
EN 16228-5:2014 Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
DIN EN 16851:2017-06 Cranes - Light crane systems
EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements
DIN EN 15746-2:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
UNE-EN 15746-2:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements

DIN 15403:1969-12 LIFTING HOOKS FOR HOISTS; KNUCKLE THREADS
EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
IEC 61672-2:2013+AMD1:2017 CSV Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
ISO 4308-1:2003 Cranes and lifting appliances Selection of wire ropes Part 1: General
ISO 11660-2:2015 Cranes Access, guards and restraints Part 2: Mobile cranes
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
EN 13557:2003+A2:2008 Cranes - Controls and control stations
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
ISO 5349-2:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace
ISO 11660-1:2008 Cranes — Access, guards and restraints — Part 1: General
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
EN ISO 6683:2008 Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)
ISO 12480-1:1997 Cranes Safe use Part 1: General
ISO 4306-1:2007 Cranes — Vocabulary — Part 1: General
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 4310:2009 Cranes — Test code and procedures
ISO 7096:2000 Earth-moving machinery Laboratory evaluation of operator seat vibration
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
ISO 6683:2005 Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
ISO 7250:1996 Basic human body measurements for technological design
EN 14502-2:2005+A1:2008 Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations
EN 61672-2:2013/A1:2017 ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017)
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
ISO 8566-2:2016 Cranes — Cabins and control stations — Part 2: Mobile cranes
EN 811 : 1996 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
ISO 13200:1995 Cranes Safety signs and hazard pictorials General principles
EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
ISO 4308-2:1988 Cranes and lifting appliances Selection of wire ropes Part 2: Mobile cranes Coefficient of utilization
ISO 11662-1:1995 Mobile cranes — Experimental determination of crane performance — Part 1: Tipping loads and radii
ISO 8686-1:2012 Cranes — Design principles for loads and load combinations — Part 1: General
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 13586:2004+A1:2008 Cranes - Access
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
DIN 15401-1:1982-11 LIFTING HOOKS; SHANK HOOKS WITH A POINT; FORGINGS
EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
EN ISO 5349-2:2001/A1:2015 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349 2:2001/AMD 1:2015)
ISO 7752-2:2011 Cranes — Control layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes
ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN ISO 5353:1998 Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995)
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN 13001-2:2014 Crane safety - General design - Part 2: Load actions
ISO 10973:1995 Cranes Spare parts manual
EN 626-2:1996+A1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 61672-1:2013 Electroacoustics - Sound level meters - Part 1: Specifications
ISO 4301-2:2009 Cranes Classification Part 2: Mobile cranes
ISO 4309:2010 Cranes Wire ropes Care and maintenance, inspection and discard
EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN ISO 5349-1 : 2001 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)
ISO 4305:2014 Mobile cranes — Determination of stability
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
EN 61000-6-4:2007/A1:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN ISO 6385:2016 ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS (ISO 6385:2016)
ISO 8087:1985 Mobile cranes Drum and sheave sizes
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
ISO 8995-3:2006 Lighting of work places Part 3: Lighting requirements for safety and security of outdoor work places
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 6309:1987 Fire protection — Safety signs
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
ISO 7296-2:1996 Cranes Graphical symbols Part 2: Mobile cranes
IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
ISO 261:1998 ISO general purpose metric screw threads General plan
DIN 15400:1990-06 LIFTING HOOKS - MATERIALS, MECHANICAL PROPERTIES, LIFTING CAPACITY AND STRESSES
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 10025-6:2004+A1:2009 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN ISO 7250 : 1997 BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN
ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
DIN 15061-2:1977-08 CRANES; GROOVE PROFILES FOR WIRE ROPE DRUMS
DIN 15401-2:1983-09 LIFTING HOOKS FOR LIFTING APPLIANCES - SINGLE HOOKS - FINISHED PARTS WITH THREADED SHANK
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
ISO 4301-1:2016 Cranes — Classification — Part 1: General
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 12482-1:1995 Cranes Condition monitoring Part 1: General
ISO 4306-2:1994 Cranes — Vocabulary — Part 2: Mobile cranes
ISO 6385:2016 Ergonomics principles in the design of work systems
ISO 8995-1:2002 Lighting of work places Part 1: Indoor
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN 2:1992/A1:2004 CLASSIFICATION OF FIRES
1987/404/EEC : 1987 COUNCIL DIRECTIVE OF 25 JUNE 1987 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO SIMPLE PRESSURE VESSELS
EN ISO 7096:2008/AC:2009 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
ISO 4014:2011 Hexagon head bolts Product grades A and B

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us