EN 13134:2000
Current
Current
The latest, up-to-date edition.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information and requirements to be agreed
and to be documented
5 Brazing variables
6 pBPS
7 Approval of BPS
8 Test pieces and test specimens
9 Examination and testing
10 Range of approval
11 Brazing procedure approval record (BPAR)
Annex A (informative) - Guidelines for practical
application of brazing procedure approval
Annex B (informative) - Brazing procedure approval
record (BPAR) form - Part 1: Procedure
approval certificate
Annex C (informative) - Brazing procedure approval
record (BPAR) form - Part 2: Approved
brazing procedure
Annex D (informative) - Brazing procedure approval
record (BPAR) form - Part 3: Test results
Annex ZA (informative) - Clauses of this European
Standard addressing essential requirements
or other provisions of EU Directives
This European Standard specifies general rules (test procedures, test pieces) for the specification and approval of brazing procedures for all materials, metallic and non-metallic. It is anticipated that, where necessary, specific requirements for individual industries will be developed within this framework and detailed in the relevant application standard. The recommended format for the procedure approvalcertificate is given in annex B. It assumes that the brazing procedure specifications are used in production and, in the case of manual flame brazing, by competent brazers approved in accordance with EN 13133, where relevant.
| Committee |
CEN/TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 13134 : 2001 | Identical |
| DIN EN 13134:2000-12 | Identical |
| UNI EN 13134 : 2002 | Identical |
| SN EN 13134 : 2000 | Identical |
| BS EN 13134:2000 | Identical |
| NBN EN 13134 : 2000 | Identical |
| NEN EN 13134 : 2000 | Identical |
| I.S. EN 13134:2000 | Identical |
| NS EN 13134 : 1ED 2000 | Identical |
| UNE-EN 13134:2001 | Identical |
| PN EN 13134 : 2004 | Identical |
| I.S. EN ISO 11118:2015&LC:2015-12 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
| DIN EN ISO 13585:2012-10 | Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) |
| DIN EN ISO 11118:2016-03 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS |
| 05/30133040 DC : DRAFT APR 2005 | BS EN 1866 - MOBILE FIRE EXTINGUISHERS |
| BS EN ISO 10961:2012 | Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection |
| 12/30266853 DC : 0 | BS EN 1866-2 - MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
| I.S. EN ISO 7396-1:2016 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| DIN ISO 11745:2016-09 | Brazing for aerospace applications - Qualification test for brazers and brazing operators - Brazing of metallic components (ISO 11745:2010 + Amd.1:2015) |
| 01/713049 DC : DRAFT SEP 2001 | PREN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES |
| 01/703999 DC : DRAFT FEB 2001 | EN ISO 10380 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES |
| BS EN ISO 7396-1:2016 | Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum |
| BS ISO 11745 : 2010 | BRAZING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR BRAZERS AND BRAZING OPERATORS - BRAZING OF METALLIC COMPONENTS |
| I.S. EN ISO 14903:2017 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS (ISO 14903:2017) |
| I.S. EN 13445-4:2014 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| DIN EN 14197-2:2006-11 | CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING |
| DIN EN 14324 E : 2004 | BRAZING - GUIDANCE ON THE APPLICATION OF BRAZED JOINTS |
| UNE-EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| BS EN 13807:2017 | Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs). Design, manufacture, identification and testing |
| EN 13133:2000 | Brazing - Brazer approval |
| DIN EN 14800:2007-06 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| EN 13458-2:2002/AC:2006 | CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING |
| EN 12205:2001 | Transportable gas cylinders - Non refillable metallic gas cylinders |
| DIN EN 1866:2006-03 | MOBILE FIRE EXTINGUISHERS |
| BS EN 16084:2011 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| 15/30318290 DC : 0 | BS EN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES |
| DIN ISO 11745 E : 2016 | BRAZING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR BRAZERS AND BRAZING OPERATORS - BRAZING OF METALLIC COMPONENTS (ISO 11745:2010 + AMD.1:2015) |
| 09/30186922 DC : 0 | BS EN ISO 13585 - BRAZING - BRAZER QUALIFICATION |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN 1866-2:2014 | Mobile fire extinguishers Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 |
| 16/30338439 DC : 0 | BS EN ISO 14903 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| BS ISO 10961 : 2010 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION |
| I.S. EN 16084:2011 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| DIN EN 16084:2011-07 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| I.S. EN 1866-2:2014 | MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
| EN ISO 10961:2012 | Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010) |
| DIN EN 12807:2016-09 (Draft) | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| EN 13445-4 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| UNI EN 3-8 : 2007 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| DIN EN 14324:2004-12 | Brazing - Guidance on the application of brazed joints; German version EN 14324:2004 |
| BS EN 3-8:2006 | Portable fire extinguishers Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
| BS EN 14197-2 : 2003 | CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING |
| DIN EN 1866:1998-11 | MOBILE FIRE EXTINGUISHERS |
| DIN EN 14585-1:2006-04 | Corrugated metal hose assemblies for pressure applications - Part 1: Requirements |
| I.S. EN 13807:2017 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| I.S. EN ISO 17662:2016 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| I.S. EN 14398-2:2003 | CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING |
| ISO 14903:2017 | Refrigerating systems and heat pumps — Qualification of tightness of components and joints |
| 02/712507 DC : DRAFT OCT 2002 | EN 14585 - PRESSURISED CORRUGATED METAL HOSE ASSEMBLIES |
| UNI EN ISO 10961 : 2012 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION |
| 13/30255929 DC : 0 | BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| 07/30161864 DC : 0 | BS EN 12807 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| 14/30287821 DC : 0 | BS EN 13807 - TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| EN ISO 14903:2017 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017) |
| I.S. EN ISO 13585:2012 | BRAZING - QUALIFICATION TEST OF BRAZERS AND BRAZING OPERATORS (ISO 13585:2012) |
| UNI EN 12807 : 2009 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| UNI EN ISO 13585 : 2012 | BRAZING - QUALIFICATION TEST OF BRAZERS AND BRAZING OPERATORS |
| BS EN 12807:2009 | LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction |
| UNE-EN 16084:2011 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints |
| DIN EN ISO 7396-1:2016-09 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| 17/30359538 DC : 0 | BS EN 14324 - BRAZING - GUIDANCE ON THE APPLICATION OF BRAZED JOINTS |
| DIN EN ISO 17662:2016-09 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| DIN EN 14800 E : 2007 | CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS |
| DIN EN 3-8:2015-07 (Draft) | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| DIN EN 13807:2016-02 (Draft) | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCS) - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN 1866:2005 | Mobile fire extinguishers |
| UNE-EN 13807:2017 | Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing |
| UNE-EN 13445-4:2015 | Unfired pressure vessels - Part 4: Fabrication |
| UNI EN 14398-2 : 2008 | CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING |
| UNI EN 14800 : 2007 | CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION DOMESTIC APPLIANCES USING GASEOUS FUELS |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 13458-2 : 2004 | CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING |
| 04/30088537 DC : DRAFT SEP 2004 | PREN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| 08/30190636 DC : DRAFT OCT 2008 | BS ISO 10961 - GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| PREN 13807 : DRAFT 2014 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| 08/30178313 DC : 0 | BS ISO 11745 - BRAZING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST OF BRAZERS AND BRAZING OPERATORS - BRAZING OF METALLIC COMPONENTS |
| BS EN ISO 11118:2015 | Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods |
| 06/30153331 DC : DRAFT JULY 2006 | BS ISO 21009-1 - CRYOGENIC VESSELS - STATIC VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| NF EN 16084 : 2011 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| UNI EN 16084 : 2011 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| UNE-EN ISO 11118:2016 | Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015) |
| PREN 14324 : DRAFT 2017 | BRAZING - GUIDANCE ON THE APPLICATION OF BRAZED JOINTS |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| I.S. EN ISO 10961:2012 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
| EN 3-8:2006/AC:2007 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| UNE-EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| I.S. EN 3-8:2006 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| EN 12807:2009 | LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
| I.S. EN 12807:2009 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN 13769:2005-09 | TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| BS EN 14398-2 : 2003 | CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING |
| BS EN 13133:2000 | Brazing. Brazer approval |
| ISO 11118:2015 | Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods |
| BS EN 13458-2:2002 | Cryogenic vessels. Static vacuum insulated vessels Design, fabrication, inspection and testing |
| ISO 13585:2012 | Brazing Qualification test of brazers and brazing operators |
| BS EN 13769:2003 | Transportable gas cylinders. Cylinder bundles. Design, manufacture, identification and testing |
| EN ISO 11118 : 2015 COR 2015 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
| BS EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| ISO 10961:2010 | Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
| DIN EN 13769:2003-12 | TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| EN 14585-1:2006 | Corrugated metal hose assemblies for pressure applications - Part 1: Requirements |
| EN 14398-2:2003+A2:2008 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 1866-2:2014 | Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 |
| EN 16084:2011 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints |
| EN 1866:2005 | Mobile fire extinguishers |
| EN 13769:2003/A1:2005 | TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| EN 14197-2:2003/AC:2006 | CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING |
| EN 14324:2004 | Brazing - Guidance on the application of brazed joints |
| EN 13807:2017 | Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing |
| I.S. EN 1866:2006 | MOBILE FIRE EXTINGUISHERS |
| I.S. EN 13769:2003 | TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| DIN EN ISO 10961:2012-06 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
| BS ISO 14903:2012 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| BS EN ISO 13585:2012 | Brazing. Qualification test of brazers and brazing operators |
| BS EN ISO 14903:2017 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| BS ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels Part 1: Design, fabrication, inspection and tests |
| 06/30100042 DC : DRAFT APR 2006 | BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION - RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
| UNI EN 1866-2 : 2014 | MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
| UNE-EN 1866-2:2015 | Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 |
| DIN EN 14398-2:2008-11 | CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING |
| BS EN 13445-4 : 2014 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| ISO 17662:2016 | Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities |
| BS EN ISO 17662:2016 | Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities |
| BS EN 14324:2004 | Brazing. Guidance on the application of brazed joints |
| BS EN 14585-1:2006 | Corrugated metal hose assemblies for pressure applications Requirements |
| BS EN 12205:2001 | Transportable gas cylinders. Non-refillable metallic gas cylinders |
| EN ISO 13585:2012 | Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) |
| DIN EN 13807:2017-05 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCS) - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| EN 12797:2000/A1:2003 | BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| EN 13133:2000 | Brazing - Brazer approval |
| EN 12799:2000/A1:2003 | BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.