• There are no items in your cart

EN 13164:2012+A1:2015

Current
Current

The latest, up-to-date edition.

Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
Published date

02-18-2015

Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units, abbreviated terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy of
  Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Determination of the declared values
        of thermal resistance and thermal conductivity
Annex B (normative) - Product type determination (PTD) and
        Factory production control (FPC)
Annex C (normative) - Determination of the aged values of
        thermal resistance and thermal conductivity
Annex D (normative) - XPS multi-layered insulation products
Annex E (informative) - Additional properties
Annex F (informative) - Plan for cutting test specimen
Annex ZA (informative) - Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Regulation
Bibliography

This European Standard specifies the requirements for factory made products of extruded polystyrene foam, with or without facings or coatings, which are used for thermal insulation of buildings. The products are manufactured in the form of boards which are also available with special edge and surface treatment (tongue & grooves, shiplap etc.).

Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered.

This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.

The standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.

Products with a declared thermal resistance lower than 0,25 m²K/W or a declared thermal conductivity greater than 0,060 W/(mK) at 10 C are not covered by this standard.

This standard does not cover in situ insulation products, nor products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14307), or civil engineering applications (covered by EN 14934).

DevelopmentNote
Supersedes PREN 13164. (01/2013) 2012 Edition Re-Issued in February 2015 & incorporates AMD 1 2015. (03/2015)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

BS EN 14509:2013 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
DIN EN 16855-1 E : 2017 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
15/30315078 DC : DRAFT MAY 2015 BS EN 14307 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
DIN EN 14509:2013-12 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
07/30167661 DC : DRAFT AUG 2007 BS EN 15715 - THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
PREN 16855 : DRAFT 2015 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
UNE-EN 16783:2017 Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
I.S. EN 16783:2017 THERMAL INSULATION PRODUCTS - PRODUCT CATEGORY RULES (PCR) FOR FACTORY MADE AND IN-SITU FORMED PRODUCTS FOR PREPARING ENVIRONMENTAL PRODUCT DECLARATIONS
S.R. CEN/TS 16459:2013 EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187
DIN EN 13830:2015-07 CURTAIN WALLING - PRODUCT STANDARD
EN 13172:2012 Thermal insulation products - Evaluation of conformity
PREN 13830 : DRAFT 2013 CURTAIN WALLING - PRODUCT STANDARD
13/30266550 DC : 0 BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
BS EN 16783:2017 Thermal insulation products. Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
02/105004 DC : DRAFT JULY 2002 PREN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING SANDWICH PANELS - FACTORY MADE PRODUCTS - SPECIFICATION
13/30281348 DC : 0 BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD
UNI EN 15715 : 2009 THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
12/30268937 DC : 0 BS EN 16491 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION
UNE-EN 13830:2016 Curtain walling - Product standard
I.S. EN 13830:2015 CURTAIN WALLING - PRODUCT STANDARD
I.S. EN 13950:2014 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 13172:2012 THERMAL INSULATION PRODUCTS - EVALUATION OF CONFORMITY
DIN EN 16855-1:2017-05 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
11/30237554 DC : 0 BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS
UNI CEN/TS 16459 : 2014 EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187
14/30301580 DC : 0 BS EN/TC 16783 - THERMAL INSULATION PRODUCTS - PRODUCT CATEGORY RULES (PCR) FOR FACTORY MADE AND IN-SITU FORMED PRODUCTS FOR PREPARING ENVIRONMENTAL PRODUCT DECLARATIONS
BS EN 15715:2009 Thermal insulation products. Instructions for mounting and fixing for reaction to fire testing. Factory made products
15/30320130 DC : 0 BS EN 16855 - WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
DIN EN 15498:2008-08 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
DIN EN 15715:2010-04 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
04/30113509 DC : DRAFT MAY 2004 BS EN 14934 - THERMAL INSULATION OF ROAD AND RAILWAYS AND EMBANKMENT FILLING - FACTORY MADE PRODUCTS OF EXTRUDED POLYSTYRENE FOAM (XPS) - SPECIFICATION
BS EN 15498:2008 Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance
DIN EN 14307:2016-03 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
I.S. EN 15715:2009 THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
PREN 14509 : DRAFT 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 16855-1:2017 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
PREN 14307 : DRAFT 2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
UNI EN 15498 : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
PREN 13950 : DRAFT 2011 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13172:2012-04 THERMAL INSULATION PRODUCTS - EVALUATION OF CONFORMITY
I.S. EN 14509:2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 15498:2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
DIN EN 13950:2014-09 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 14509:2014 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
BS EN 13172:2012 Thermal insulation products. Evaluation of conformity
EN 13830:2015 Curtain walling - Product standard
UNI EN 13172 : 2012 Thermal insulation products - Evaluation of conformity
UNI EN 14509 : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 13950 : 2014 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 15498 E : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
11/30251985 DC : 0 BS EN 13950 - GYPSUM PLASTERBOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 16855-1:2015-06 (Draft) WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
UNE-EN 14307:2017 Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
DIN EN 14509 E : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
PD CEN/TS 16459:2013 External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187
UNE-EN 15715:2012 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
PREN 16491 : DRAFT 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION
BS EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels. Definitions, requirements and test methods
CEN/TS 16459:2013 External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187
BS EN 13830:2015 Curtain walling. Product standard
UNE-EN 13172:2012 Thermal insulation products - Evaluation of conformity
EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
EN 15498:2008 Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance
EN 14509:2013 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
EN 16783:2017 Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
EN 16855-1:2017 Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 1: Prefabricated cold room kits
EN 15715:2009 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
17/30354084 DC : 0 BS EN 16855-2 - WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 2: CUSTOMIZED COLD ROOMS
DIN EN 14307 E : 2016 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
BS EN 16855-1:2017 Walk-in cold rooms. Definition, thermal insulation performance and test methods Prefabricated cold room kits
DIN EN 15715 E : 2010 THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS

ISO 9229:2007 Thermal insulation Vocabulary
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN ISO 10456:2007/AC:2009 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
EN 13820:2003 Thermal insulating materials for building applications - Determination of organic content
EN 1606:2013 Thermal insulating products for building applications - Determination of compressive creep
EN 12939:2000 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
ISO 1716:2010 Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
EN ISO 9229:2007 Thermal insulation - Vocabulary (ISO 9229:2007)
EN 1605:2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
EN 824:2013 Thermal insulating products for building applications - Determination of squareness
ISO 4590:2016 Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells
EN 14307:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
EN 825:2013 Thermal insulating products for building applications - Determination of flatness
EN 823:2013 Thermal insulating products for building applications - Determination of thickness
ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
EN 13793:2003 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
EN 12090:2013 Thermal insulating products for building applications - Determination of shear behaviour
ISO 16269-6:2014 Statistical interpretation of data Part 6: Determination of statistical tolerance intervals
EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
EN 12091:2013 Thermal insulating products for building applications - Determination of freeze-thaw resistance
EN 12089:2013 Thermal insulating products for building applications - Determination of bending behaviour
ISO 11561:1999 Ageing of thermal insulation materials Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
EN 14934:2007 Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 826:2013 Thermal insulating products for building applications - Determination of compression behaviour
EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
EN 15715:2009 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
EN ISO 11925-2:2010/AC:2011 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
EN 12086:2013 Thermal insulating products for building applications - Determination of water vapour transmission properties
EN 13172:2012 Thermal insulation products - Evaluation of conformity
EN 822:2013 Thermal insulating products for building applications - Determination of length and width

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.