EN 13285:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Unbound mixtures - Specifications
06-22-2019
09-15-2010
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Evaluation of conformity
6 Designation and description
7 Marking and labelling
Annex A (informative) - Use of the supplier declared value
Annex B (informative) - Guidance on the assessment of
the mechanical behaviour of unbound mixtures
Annex C (normative) - Factory production control
Bibliography
This European Standard specifies requirements for unbound mixtures used for construction and maintenance of roads, airfields and other trafficked areas. The requirements are defined with appropriate cross-reference to EN 13242.This European Standard applies to unbound mixtures of natural, artificial and recycled aggregates with a upper sieve size (D) from 8 mm to 90 mm and lower sieve size (d) = 0 at the point of delivery.NOTE 1Mixtures with an upper sieve size (D) greater than 90 mm are not covered by this European Standard but may be specified in the place of use.NOTE 2Water content of the mixture and the density of the installed layer are not specified mixture requirements. Both parameters are related to the control of the construction of the layer and are outside the scope of this European Standard.
| Committee |
CEN/TC 227
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NS EN 13285 : 1ED 2010 | Identical |
| DIN EN 13285:2018-10 | Identical |
| DIN EN 13285:2010-12 | Identical |
| PN EN 13285:2018 | Identical |
| NF EN 13285 : 2010 | Identical |
| ONORM EN 13285 : 2011 | Identical |
| BS EN 13285:2003 | Identical |
| I.S. EN 13285:2010 | Identical |
| I.S. EN 13285:2018 | Identical |
| NS EN 13285:2018 | Identical |
| PN EN 13285 : 2010 | Identical |
| UNI EN 13285 : 2010 | Identical |
| BS EN 13285:2018 | Identical |
| NBN EN 13285 : 2010 | Identical |
| SN EN 13285 : 2010 | Identical |
| NEN EN 13285 : 2010 | Identical |
| UNE-EN 13285:2010 | Identical |
| ÖNORM EN 13285: 2018 | Identical |
| UNI EN 13285:2018 | Identical |
| BS EN 13285:2010 | Identical |
| 15/30270279 DC : 0 | BS EN 16432-2 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SUBSYSTEMS AND COMPONENTS |
| DIN EN 16432-2:2015-04 (Draft) | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| I.S. EN 16432-2:2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| 11/30240498 DC : 0 | BS EN 14227-2 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND MIXTURES |
| DIN EN 14227-2:2013-08 | Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures; German version EN 14227-2:2013 |
| I.S. EN 14227-2:2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND MIXTURES |
| UNI EN 14227-2 : 2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND GRANULAR MIXTURES |
| DIN EN 16432-2 E : 2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| BS EN 14227-2:2013 | Hydraulically bound mixtures. Specifications Slag bound granular mixtures |
| BS EN 13286-7:2004 | Unbound and hydraulically bound mixtures Cyclic load triaxial test for unbound mixtures |
| UNE-EN 14227-2:2014 | Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures |
| EN 14227-2:2013 | Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures |
| DIN EN 13286-7:2004-04 | Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures; German version EN 13286-7:2004 |
| EN 13286-7 : 2004 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 7: CYCLIC LOAD TRIAXIAL TEST FOR UNBOUND MIXTURES |
| EN 13286-1:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
| EN 13286-2:2010/AC:2012 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| EN 1744-1:2009+A1:2012 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
| EN 13242:2002+A1:2007 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 13286-5:2003 | Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table |
| EN 13286-4:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER |
| EN 13286-3:2003 | Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters |
| EN 13286-7 : 2004 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 7: CYCLIC LOAD TRIAXIAL TEST FOR UNBOUND MIXTURES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.