EN 1337-2:2004
Current
The latest, up-to-date edition.
Structural bearings - Part 2: Sliding elements
03-17-2004
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
4 Functional requirements
5 Material properties
6 Design requirements
7 Manufacturing, assembly and tolerances
8 Conformity evaluation
9 Installation
10 Criteria for in-service inspection
Annex A (informative) Reduced area for sliding elements
Annex B (informative) Coefficient of friction for dimpled
PTFE sheets
Annex C (informative) Method for calculating the deformation
of backing plates attached to concrete
Annex D (normative) Test methods for friction
Annex E (normative) Hard chromium plated surfaces - Ferroxyl
test
Annex F (normative) Thickness measurement of the anodized
surfaces
Annex G (normative) Lubricant - oil separation test
Annex H (normative) Oxidation stability of lubricant
Annex J (normative) Austenitic steel sheets adhesive - Lap
shear test
Annex K (normative) Factory Production Control (FPC)
Annex L (informative) Audit testing
Bibliography
This European Standard specifies the characteristics for the design and manufacture of sliding elements and guides which are not structural bearings but only parts of them for combination with structural bearings as defined in other Parts of this European Standard.Suitable combinations are shown in Table 1 of EN 1337-1:2000.Sliding surfaces with a diameter of the circumscribing circle of single or multiple PTFE sheets less than 75 mm or greater than 1500 mm, or with effective bearing temperatures less than -35°C or greater than 48°C are outside the scope of this European Standard.Sliding elements for use as temporary devices during construction, for example during launching of the superstructure, are also outside the scope of this European Standard.In this standard the specification is also given for curved sliding surfaces which are not part of separate sliding elements but which are incorporated in cylindrical or spherical PTFE bearings as per EN 1337.NOTE The general principles detailed in this European Standard may be applied for sliding elements outside this scope, but their suitability for the intended use should be proven.
| Committee |
CEN/TC 167
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 1337-2:2004 | Identical |
| NEN EN 1337-2 : 2004 | Identical |
| NBN EN 1337-2 : 2004 | Identical |
| DIN EN 1337-2:2004-07 | Identical |
| UNE-EN 1337-2:2006 | Identical |
| PN EN 1337-2 : 2005 | Identical |
| UNI EN 1337-2 : 2004 | Identical |
| I.S. EN 1337-2:2004 | Identical |
| DIN EN 1337-2 E : 2004 | Identical |
| NF EN 1337-2 : 2004 | Identical |
| NS EN 1337-2 : 2ED 2004 | Identical |
| SN EN 1337-2 : 2004 | Identical |
| 02/105261 DC : 0 | BS EN 1337-8 - STRUCTURAL BEARINGS - GUIDED BEARINGS AND RESTRAINED BEARINGS |
| DIN EN 1337-8 E : 2008 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1998-2 : 2005 | EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES |
| EN 1337-8:2007 | Structural bearings - Part 8: Guide Bearings and Restraint Bearings |
| EN 1337-7:2004 | Structural bearings - Part 7: Spherical and cylindrical PTFE bearings |
| I.S. EN 1998-2:2006 | EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 1337-4:2004/AC:2007 | STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
| EN 1337-5:2005 | Structural bearings - Part 5: Pot bearings |
| EN 1337-6:2004 | Structural bearings - Part 6: Rocker bearings |
| EN 15129:2018 (edition 2) | Anti-seismic devices |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1337-3:2005-07 | Structural bearings - Part 3: Elastomeric bearings |
| DIN EN 1337-6:2004-08 | Structural bearings - Part 6: Rocker bearings |
| DIN EN 1337-5:2005-07 | Structural bearings - Part 5: Pot bearings |
| BS EN 1337-5:2005 | Structural bearings Pot bearings |
| I.S. EN 1337-7:2004 | STRUCTURAL BEARINGS - PART 7: SPHERICAL AND CYLINDRICAL PTFE BEARINGS |
| DIN EN 1337-8:2008-01 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
| 11/30247279 DC : 0 | BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL |
| 17/30347025 DC : 0 | BS EN 15129 - ANTI-SEISMIC DEVICES |
| BS EN 1337-8:2007 | Structural bearings Guide bearings and restraint bearings |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 1337-8:2007 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1337-4 E : 2004 | STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
| DIN EN 1337-7 E : 2004 | STRUCTURAL BEARINGS - PART 7: SPHERICAL AND CYLINDRICAL PTFE BEARINGS |
| DIN EN 1337-5 E : 2005 | STRUCTURAL BEARINGS - PART 5: POT BEARINGS |
| DIN EN 1337-3 E : 2005 | STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| DIN EN 1337-4:2004-08 | Structural bearings - Part 4: Roller bearings |
| UNI EN 1998-2 : 2011 | EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES |
| UNE-EN 1998-2:2012 | Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 18/30365845 DC : 0 | BS EN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| BS EN 1337-6:2004 | Structural bearings Rocker bearings |
| BS EN 1337-3:2005 | Structural bearings Elastomeric bearings |
| BS EN 1337-7:2004 | Structural bearings Spherical and cylindrical PTFE bearings |
| DIN EN 1337-7:2004-08 | Structural bearings - Part 7: Spherical and cylindrical PTFE bearings |
| EN 1998-2:2005/A2:2011 | EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES |
| I.S. EN 15129:2009 | ANTI-SEISMIC DEVICES |
| PREN 15129 : DRAFT 2017 | ANTI-SEISMIC DEVICES |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1337-6 E : 2004 | STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
| BS EN 1337-4:2004 | Structural bearings Roller bearings |
| EN 1337-3:2005 | Structural bearings - Part 3: Elastomeric bearings |
| DIN EN 1998-2:2011-12 | Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges (includes Amendment A1:2009 + A2:2011 + Corrigendum AC:2010) |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| EN ISO 4287:1998/A1:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| EN 1337-1:2000 | Structural bearings - Part 1: General design rules |
| EN 10137-1 : 1995 | PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS |
| ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
| ISO 6507-2:2005 | Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines |
| ISO 2039-1:2001 | Plastics Determination of hardness Part 1: Ball indentation method |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| ISO 2137:2007 | Petroleum products and lubricants Determination of cone penetration of lubricating greases and petrolatum |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN 1337-11:1997 | Structural bearings - Part 11: Transport, storage and installation |
| EN 10113-1 : 1993 | HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - GENERAL DELIVERY CONDITIONS |
| EN 1337-9:1997 | Structural bearings - Part 9: Protection |
| EN ISO 2039-1 : 2003 | PLASTICS - DETERMINATION OF HARDNESS - PART 1: BALL INDENTATION METHOD (ISO 2039-1:2001) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 1337-10:2003 | Structural Bearings - Part 10: Inspection and maintenance |
| EN 1337-7:2004 | Structural bearings - Part 7: Spherical and cylindrical PTFE bearings |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ENV 1992-1-1 : DRAFT 91 COR 1992 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| EN ISO 527-3:1995/AC:2002 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS |
| ISO 2176:1995 | Petroleum products — Lubricating grease — Determination of dropping point |
| ISO 3522:2007 | Aluminium and aluminium alloys Castings Chemical composition and mechanical properties |
| ISO 3755:1991 | Cast carbon steels for general engineering purposes |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.