EN 13411-7:2006+A1:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
07-27-2021
10-22-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
6 Verification of safety requirements
7 Information for use
Annex A (informative) Construction and sizes for one design
of symmetric wedge socket with welded socket body
Annex B (informative) Recommendations for safe use and
inspection of symmetric wedge sockets conforming to
Annex A, to be provided by the manufacturer
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 95/16/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZC (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
This European Standard specifies the minimum requirements for symmetrical wedge socket terminations for stranded steel wire ropes conforming to EN 12385-5 for lifts.This European Standard covers those symmetric wedge sockets intended for use at temperatures between -20 °C and 100 °C.This European Standard only covers those symmetric wedge sockets that have welded socket bodies.An example of the construction and sizes of a symmetric wedge socket is given in informative Annex A.The informative Annex B gives the recommendations for the safe use and inspection of symmetric wedge socket according to Annex A.This European Standard deals with all significant hazards, hazardous situations and events relevant to symmetric wedge sockets for terminations for steel wire ropes, when used as intended and under conditions of misuse which are reasonable foreseeable by the manufacturer.The hazards covered by this European Standard are identified in Clause 4.This European Standard applies to symmetric wedge sockets, which are manufactured after the date of its publication.
| DevelopmentNote |
2006 Edition Re-Issued in October 2008 & incorporates AMD 1 2008. (11/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 13411-7 : 2006 + A1 2009 | Identical |
| SANS 53411-7 : 1ED 2015 | Identical |
| NF EN 13411-7 : 2006 + A1 2008 | Identical |
| UNE-EN 13411-7:2006 | Identical |
| NS EN 13411-7 : 2006 + A1 2008 | Identical |
| SS-EN 13411-7:2006+A1:2008 | Identical |
| DIN EN 13411-7 E : 2009 | Identical |
| UNI EN 13411-7 : 2009 | Identical |
| NEN EN 13411-7:2018 Ontw.en | Identical |
| SN EN 13411-7 : 2006 + A1 2009 | Identical |
| NEN EN 13411-7 : 2006 + A1 2008 | Identical |
| I.S. EN 13411-7:2006 | Identical |
| DIN EN 13411-7:2018-11 (Draft) | Identical |
| PN EN 13411-7 : 2007 + A1 2009 | Identical |
| BS EN 13411-7 : 2006 | Identical |
| ONORM EN 13411-7 : 2009 | Identical |
| DIN EN 13411-7:2009-04 | Identical |
| UNE-EN 13411-7:2006+A1:2008 | Identical |
| BS EN 13411-7:2006+A1:2008 | Identical |
| 11/30251717 DC : 0 | BS EN 81-20 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| 09/30202029 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| 07/30158774 DC : 0 | BS EN 791 AMD1 - DRILL RIGS - SAFETY |
| BS EN 16869:2017 | Design/construction of Via Ferratas |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 15567-1:2015 | Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements |
| 17/30356606 DC : 0 | BS ISO 8100-1 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 1: SAFETY REQUIREMENTS FOR PASSENGER AND GOODS PASSENGER LIFTS |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| EN 13157:2004+A1:2009 | Cranes - Safety - Hand powered cranes |
| EN 13135-2:2004+A1:2010 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| 13/30279677 DC : 0 | BS EN 15567-1 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| I.S. EN 16869:2017 | DESIGN/CONSTRUCTION OF VIA FERRATAS |
| UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| 15/30321787 DC : 0 | BS EN 16869 - DESIGN/CONSTRUCTION OF VIA FERRATA |
| 11/30235009 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| UNI EN 81-20 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| S.R. CWA 15902-1:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS) |
| DIN EN 13157:2010-07 | Cranes - Safety - Hand powered cranes (includes Amendment A1:2009) |
| DIN EN 81-20 E : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| BS EN 15567-1:2015 | Sports and recreational facilities. Ropes courses Construction and safety requirements |
| UNE-EN 81-20:2017 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts |
| UNE-EN 13135-2:2005 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 13852-1:2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES |
| I.S. EN 13157:2004 | CRANES - SAFETY - HAND POWERED CRANES |
| 09/30181658 DC : DRAFT JAN 2009 | BS EN 13157 AMD1 - CRANES - SAFETY - HAND POWERED LIFTING EQUIPMENT |
| PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| 13/30277463 DC : 0 | BS EN 12927 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES |
| PREN 15567-1 : DRAFT 2013 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| BS EN 13135-2 : 2004 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| UNI EN 13135-2 : 2010 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| UNI EN 13157 : 2009 | CRANES - SAFETY - HAND POWERED CRANES |
| UNI EN 13852-1 : 2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| PREN 13852-1 : DRAFT 2011 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| EN 16869:2017/AC:2018 | DESIGN/CONSTRUCTION OF VIA FERRATAS |
| DIN EN 13852-1:2014-01 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| BS EN 13157 : 2004 | CRANES - SAFETY - HAND POWERED CRANES |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 81-20:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts |
| I.S. EN 15567-1:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| UNE-EN 13852-1:2014 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN 14492-1:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN 14492-2:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| 10/30194893 DC : 0 | BS EN 13135-2:2004/A1 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| I.S. EN 81-20:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 13135-2:2011-07 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS EN 13852-1:2013 | Cranes. Offshore cranes General-purpose offshore cranes |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 15567-1:2015-08 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| DIN EN 81-20:2014-11 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| DIN 1684-1:1998-08 | ROUGH CASTINGS OF MALLEABLE IRON - GENERAL TOLERANCES AND MACHINING ALLOWANCES |
| EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| EN 1562:2012 | Founding - Malleable cast irons |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| 1995/16/EC : 1995 | DIRECTIVE 95/16/EC OF 29 JUNE 1995 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO LIFTS |
| EN ISO 12100-1:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 1289:1998/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN 12385-5:2002/AC:2005 | STEEL WIRE ROPES - SAFETY - PART 5: STRANDED ROPES FOR LIFTS |
| EN ISO 12100-2:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| EN 1290:1998/A2:2003 | NON-DESTRUCTIVE EXAMINATION OF WELDS - MAGNETIC PARTICLE EXAMINATION OF WELDS |
| EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| EN 1561:2011 | Founding - Grey cast irons |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.