EN 13451-1:2011+A1:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Swimming pool equipment - Part 1: General safety requirements and test methods
Superseded date
11-20-2020
Published date
10-12-2016
Publisher
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements
5 Test methods
6 Instruction and information
7 Marking
Annex A (normative) - Loads
Annex B (normative) - Method of calculation of structural
integrity
Annex C (normative) - Physical testing of structural
integrity
Annex D (normative) - Methods of test for entrapment
Annex E (normative) - Testing of slip resistance
Annex F (normative) - Use of stainless steel with load bearing
functions in the swimming pool atmosphere
Bibliography
This European Standard specifies general safety requirements and test methods for equipment used in classified swimming pools as specified in EN 15288-1 and EN 15288-2.Where specific standards exist, this general standard should not be used alone.Special care is required in applying this general standard alone to equipment for which no product specific standard has yet been published.
| Committee |
CEN/TC 136
|
| DevelopmentNote |
Supersedes PREN 13451-1. (09/2011) 2011 Edition Re-Issued in October 2016 & incorporates AMD 1 2016. (10/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN 13451-1:2016 | Identical |
| DIN EN 13451-1:2001-07 | Identical |
| ONORM EN 13451-1 : 2016 | Identical |
| UNI EN 13451-1 : 2011 | Identical |
| DIN EN 13451-1:2016-12 | Identical |
| I.S. EN 13451-1:2011 | Identical |
| NEN EN 13451-1 : 2011 + A1 2016 | Identical |
| BS EN 13451-1 : 2011 | Identical |
| SN EN 13451-1 : 2011 + A1 2016 | Identical |
| NS EN 13451-1 : 2011 + A1 2016 | Identical |
| DIN EN 13451-1:2011-11 | Identical |
| NBN EN 13451-1 : 2011 | Identical |
| PN EN 13451-1 : 2012 + A1 2017 | Identical |
| NF EN 13451-1 : 2011 + A1 2016 | Identical |
| UNE-EN 13451-1:2012+A1:2018 | Identical |
| UNE-EN 13451-1:2012 | Identical |
| I.S. EN 13451-8:2001 | SWIMMING POOL EQUIPMENT - PART 8: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LEISURE WATER FEATURES |
| BS EN 15288-1 : 2008 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| 12/30266561 DC : 0 | BS EN 13451-10 - SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
| 08/30181446 DC : DRAFT JULY 2008 | BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| 12/30266564 DC : 0 | BS EN 13451-11 - SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVABLE POOL FLOORS AND MOVABLE BULKHEADS |
| BS EN 16927:2017 | Mini-pools. Specific requirements including safety and test methods for mini-pools |
| UNI EN 15836-2 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| 17/30360253 DC : 0 | BS EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| I.S. EN 15836-2:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| I.S. EN 13451-10:2014 | SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
| 17/30360256 DC : 0 | BS EN 15288-2 - SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| DIN EN 13451-11:2014-05 | Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
| BS EN 13451-11:2014 | Swimming pool equipment Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
| BS EN 13451-5:2014 | Swimming pool equipment Additional specific safety requirements and test methods for lane lines and dividing line |
| UNE-EN 13451-11:2014 | Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
| BS EN 13451-8:2001 | Swimming pool equipment Additional specific safety requirements and test methods for leisure water features |
| BS EN 13451-6:2001 | Swimming pool equipment Additional specific safety requirements and test methods for turning boards |
| I.S. EN 13451-5:2014 | SWIMMING POOL EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LANE LINES AND DIVIDING LINE |
| I.S. EN 13451-4:2014 | SWIMMING POOL EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR STARTING PLATFORMS |
| EN 60601-2-52:2010/A1:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-52: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL BEDS |
| EN 1069-1:2017 | Water slides - Part 1: Safety requirements and test methods |
| EN 13451-6:2001 | Swimming pool equipment - Part 6: Additional specific safety requirements and test methods for turning boards |
| DIN EN 13451-10:2014-05 | SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
| DIN EN 1069-1:2017-11 | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| EN 13451-7:2001 | Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals |
| EN 13451-8:2001 | Swimming pool equipment - Part 8: Additional specific safety requirements and test methods for leisure water features |
| EN 13451-11:2014 | Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
| PREN 13451-5 : DRAFT 2012 | SWIMMING POOL EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LANE LINES AND DIVIDING LINE |
| 15/30328805 DC : 0 | BS EN 16927 - MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| 05/30139205 DC : 0 | EN 15288-2 - SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| DIN EN 16582-1 E : 2015 | DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| I.S. EN 16927:2017 | MINI-POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI-POOLS |
| 13/30287839 DC : 0 | BS EN 13451-2 - SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
| DIN EN 15288-1:2010-12 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| 08/30181781 DC : DRAFT JULY 2008 | BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| I.S. EN 1069-1:2017 | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| UNE-EN 15288-1:2009 | Swimming pools - Part 1: Safety requirements for design |
| DIN EN 13451-2:2016-03 | SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
| UNE-EN 13451-5:2015 | Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines and dividing line |
| UNE-EN 13451-2:2016 | Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends |
| EN 13451-2:2015 | SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
| I.S. EN 13451-11:2014 | SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVEABLE POOL FLOORS AND MOVEABLE BULKHEADS |
| DIN EN 13451-11:2004-04 | SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVEABLE POOL FLOORS AND MOVEABLE BULKHEADS |
| I.S. EN 13451-3:2011 | SWIMMING POOL EQUIPMENT - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR INLETS AND OUTLETS AND WATER/AIR BASED WATER LEISURE FEATURES |
| DIN EN 13451-5:2001-07 | SWIMMING POOL EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LANE LINES AND DIVIDING LINE |
| DIN EN 16927:2017-05 | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| 18/30351048 DC : 0 | BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| ISO 20380:2017 | Public swimming pools — Computer vision systems for the detection of drowning accidents in swimming pools — Safety requirements and test methods |
| BS EN 16582-1:2015 | Domestic swimming pools General requirements including safety and test methods |
| UNE-EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| DIN EN 15288-2:2009-05 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| 05/30135907 DC : 0 | EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| I.S. EN 50637:2017 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL BEDS FOR CHILDREN |
| UNE-EN 13451-10:2014 | Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment |
| BS EN 60601-2-52 : 2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-52: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL BEDS |
| I.S. EN 15288-1:2008 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| I.S. EN 16582-1:2015 | DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| I.S. EN ISO 20380:2017 | PUBLIC SWIMMING POOLS - COMPUTER VISION SYSTEMS FOR THE DETECTION OF DROWNING ACCIDENTS IN SWIMMING POOLS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 20380:2017) |
| EN 13451-10:2014 | Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment |
| PREN 13451-10 : DRAFT 2016 | SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
| DIN EN 1069-1:2015-09 (Draft) | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| UNE-EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| DIN EN 13451-3:2016-06 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features (includes Amendment A3:2016) |
| DIN EN 13451-4:2014-12 | SWIMMING POOL EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR STARTING PLATFORMS |
| UNE-EN 13451-4:2015 | Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms |
| EN 15288-1:2008+A1:2010 | Swimming pools - Part 1: Safety requirements for design |
| I.S. EN 13451-2:2015 | SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
| UNI EN 13451-4 : 2014 | SWIMMING POOL EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR STARTING PLATFORMS |
| UNI EN 13451-11 : 2014 | SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVEABLE POOL FLOORS AND MOVEABLE BULKHEADS |
| EN 60601-2-52:2010/A1:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-52: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL BEDS |
| UNI EN 13451-5 : 2014 | SWIMMING POOL EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LANE LINES AND DIVIDING LINE |
| DIN EN 15836-2:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| BS EN 15288-2:2008 | Swimming pools Safety requirements for operation |
| PREN 13451-2 : DRAFT 2013 | SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
| UNI EN 15288-1 : 2010 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| PREN 13451-11 : DRAFT 2016 | SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVEABLE POOL FLOORS AND MOVEABLE BULKHEADS |
| 13/30279620 DC : 0 | BS EN 16582-1 - DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| BS EN ISO 20380:2017 | Public swimming pools. Computer vision systems for the detection of drowning accidents in swimming pools. Safety requirements and test methods |
| BS EN 13451-10:2014 | Swimming pool equipment Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment |
| 16/30341161 DC : 0 | BS EN 13451-10 - SWIMMING PL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
| I.S. EN 15288-2:2008 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| EN 15288-2:2008 | Swimming pools - Part 2: Safety requirements for operation |
| UNI EN 15288-2 : 2009 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| DIN EN 13451-10:2016-08 (Draft) | SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
| I.S. EN 60601-2-52:2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-52: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL BEDS (IEC 60601-2-52:2009) |
| BS EN 13451-3 : 2011 | SWIMMING POOL EQUIPMENT - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR INLETS AND OUTLETS AND WATER/AIR BASED WATER LEISURE FEATURES |
| BS EN 1069-1:2017 | Water slides Safety requirements and test methods |
| BS EN 13451-7:2001 | Swimming pool equipment Additional specific safety requirements and test methods for water polo goals |
| BS EN 13451-2:2015 | Swimming pool equipment Additional specific safety requirements and test methods for ladders, stepladders and handle bends |
| IEC 60601-2-52:2009+AMD1:2015 CSV | Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds |
| EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| EN 16927:2017 | Mini-pools - Specific requirements including safety and test methods for mini-pools |
| BS EN 50637:2017 | Medical electrical equipment. Particular requirements for the basic safety and essential performance of medical beds for children |
| DIN EN 16927 E : 2017 | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| 13/30281468 DC : 0 | BS EN 13451-4 - SWIMMING POOL EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR STARTING PLATFORMS |
| 15/30325361 DC : 0 | BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 15836-2:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| 12/30270970 DC : 0 | BS EN 13451-5 - SWIMMING POOL EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LANE LINES AND DIVIDING LINE |
| DIN EN 16582-1:2015-11 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| PREN 13451-4 : DRAFT 2013 | SWIMMING POOL EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR STARTING PLATFORMS |
| PREN 1069-1 : DRAFT 2015 | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| NF EN 15288-1 : 2008 + A1 2010 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| UNE-EN 16927:2017 | Mini-pools - Specific requirements including safety and test methods for mini-pools |
| UNI EN 13451-10 : 2014 | SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
| DIN EN 16927:2015-10 (Draft) | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| UNE-EN 1069-1:2017 | Water slides - Part 1: Safety requirements and test methods |
| BS EN 13451-4:2014 | Swimming pool equipment Additional specific safety requirements and test methods for starting platforms |
| EN 50637:2017 | Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children |
| EN 13451-4:2014 | Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms |
| EN 13451-3:2011+A3:2016 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
| EN 13451-5:2014 | Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines and dividing line |
| UNE-EN 13451-3:2012 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
| CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 12503-6:2001 | Sports mats - Part 6: Determination of the top friction |
| EN 1991-1-3:2003/A1:2015 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS |
| EN 12503-5:2001 | Sports mats - Part 5: Determination of the base friction |
| EN 12503-1:2013 | Sports mats - Part 1: Gymnastic mats, safety requirements |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 5904:1981 | Gymnastic equipment Landing mats and surfaces for floor exercises Determination of resistance to slipping |
| EN 1991-1-2:2002/AC:2013 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
| EN 1176-1:2017 | Playground equipment and surfacing - Part 1: General safety requirements and test methods |
| NFT 54 405-1 : 2002 | UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) EXTRUDED OR COEXTRUDED PROFILES FOR OUTSIDE USE - SPECIFICATIONS AND TEST METHODS - PART 1: SOLID WALL PVC-U |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| EN 335-1:2006 | Durability of wood and wood- based products - Definition of use classes - Part 1: General |
| GUV 18.14 : 1984 | |
| EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
| EN 1991-1-4:2005/A1:2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
| EN 15288-2:2008 | Swimming pools - Part 2: Safety requirements for operation |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 13451-3:2011+A3:2016 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.