Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • There are no items in your cart
Please enter a keyword to search
Advanced search

EN 13852-2:2004

Current
Current

The latest, up-to-date edition.

Cranes - Offshore cranes - Part 2: Floating cranes
Published date

10-27-2004

Publisher

Comite Europeen de Normalisation

Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 List of significant hazards
5 Safety requirements and/or protective measures
  5.1 General
  5.2 Structure and mechanisms
  5.3 Equipment and components
  5.4 Drive systems
  5.5 Health and safety
  5.6 Controls, indicators and limiting devices
  5.7 Protection systems
  5.8 Lifting of personnel
6 Verification of the safety requirements and/or
  protective measures
  6.1 General
  6.2 Testing
7 Information for use
  7.1 Documentation
  7.2 Operation
  7.3 Maintenance
  7.4 Inspections
  7.5 Marking
Annex A (informative) Selection of a suitable set of
        crane standards for a given application
Annex B (normative) Determination of factors
      B.1 Calculation of the dynamic coefficient Phi[n]
          by the simplified method
      B.2 Calculation of dynamic coefficient Phi[n] by
          motion response analysis
      B.3 Out of plane influences
      B.4 Hook velocity
      B.5 Load combinations
Annex C (normative) Environmental influences
      C.1 General
      C.2 Wind
      C.3 Ice
      C.4 Stowage and transportation
      C.5 Corrosion protection
      C.6 Lightning protection
      C.7 High temperatures
Annex D (normative) Failure mode analysis
      D.1 General
      D.2 Failure mode charts
Annex E (normative) Material selection
      E.1 General
      E.2 Verification of material quality
      E.3 Forged rings for slewing bearings
      E.4 Slewing bearing fasteners
      E.5 Welded structures
      E.6 Non-welded components
Annex F (informative) Control station instrumentation
Annex G (normative) Wire rope safety factors
      G.1 General
      G.2 Static safety factors
      G.3 Dynamic safety factors
Annex H (normative) Slewing systems
      H.1 Systems incorporating slewing rings
      H.2 Systems incorporating house rollers and pintle
          type design
Annex I (normative) Requirements for brakes
Annex J (normative) Ranking of safety systems
Annex K (normative) Winches
Annex L (informative) Typical floating cranes
Annex M (informative) Excursion envelope for offlead and
        sidelead
Annex N (normative) Equipment for use in a hazardous area
      N.1 General
      N.2 Avoidance or reduction of ignition sources
      N.3 Electrotechnical equipment
      N.4 Non-electrotechnical equipment
      N.5 Electrostatic discharge
Bibliography

This document specifies the safety requirements for floating cranes including their supporting pedestals or structures.This document applies to cranes manufactured after the date of issue of this document.This document does not cover:a)fabrication, assembly, dismantling or changing the configuration of the crane;b)lifting accessories, i.e. any item between the hook and the load;c)design temperature below -20 °C;d)operations at an ambient temperature above 50 °C;e)cranes covered by the Machinery Directive.The significant hazards covered by this document are identified in clause 4.This document includes requirements for lifting of persons. The use of cranes for lifting of persons may be subject to specific national regulations. Where National Authorities permit the use of a floating crane for the lifting of persons, the crane would at least need to fulfil the requirements of this standard and be adopted in accordance with the relevant National regulations for the lifting of persons.

Committee
CEN/TC 147
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

UNE-EN 16851:2017 Cranes - Light crane systems
BS EN 13001-1:2015 Cranes. General design General principles and requirements
EN 16851:2017 Cranes - Light crane systems
I.S. EN 13001-1:2015 CRANES - GENERAL DESIGN - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
I.S. EN 16851:2017 CRANES - LIGHT CRANE SYSTEMS
DIN EN 13001-1:2015-06 CRANES - GENERAL DESIGN - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
UNE-EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements
DIN EN 16851 E : 2017 CRANES - LIGHT CRANE SYSTEMS
API 2FPS : 2011 PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS
BS EN 16851:2017 Cranes. Light crane systems
DIN EN 16851:2015-05 (Draft) CRANES - LIGHT CRANE SYSTEMS
DIN EN 16851:2017-06 Cranes - Light crane systems
EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements

EN 10113-2 : 1993 HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
ISO 4308-1:2003 Cranes and lifting appliances Selection of wire ropes Part 1: General
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
EN 12385-2:2002+A1:2008 Steel wire ropes - Safety - Part 2: Definitions, designation and classification
EN 12385-4:2002+A1:2008 Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 13557:2003+A2:2008 Cranes - Controls and control stations
EN 418 : 1992 SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 12385-1:2002+A1:2008 Steel wire ropes - Safety - Part 1: General requirements
ISO 12480-1:1997 Cranes Safe use Part 1: General
EN 12644-2:2000+A1:2008 Cranes - Information for use and testing - Part 2: Marking
EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
IEC 61131-3:2013 Programmable controllers - Part 3: Programming languages
EN 10137-1 : 1995 PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 50020:2002 Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i'
EN 12385-3:2004+A1:2008 Steel wire ropes - Safety - Part 3: Information for use and maintenance
EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 13135-2:2004+A1:2010 Cranes - Equipment - Part 2: Non-electrotechnical equipment
ISO 12478-1:1997 Cranes Maintenance manual Part 1: General
EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
ISO 8566-1:2010 Cranes Cabins and control stations Part 1: General
EN 10025:1990/A1:1993 HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
ISO 9927-1:2013 Cranes — Inspections — Part 1: General
EN 13586:2004+A1:2008 Cranes - Access
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 50017:1998 Electrical apparatus for potentially explosive atmospheres - Powder filling "q"
EN 61131-3:2013 Programmable controllers - Part 3: Programming languages
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN 13411-3:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
EN 10137-2 : 1995 PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR QUENCHED AND TEMPERED STEELS
EN 13135-1:2003+A1:2010 Cranes - Equipment - Part 1: Electrotechnical equipment
EN 10113-1 : 1993 HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - GENERAL DELIVERY CONDITIONS
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
EN 61000-6-4:2007/A1:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
EN 13411-4:2011 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
EN 10204:2004 Metallic products - Types of inspection documents
EN 60079-10:2003 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 50015:1998 Electrical apparatus for potentially explosive atmospheres - Oil immersion "o"
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
EN 50016:2002 Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p"
EN 457 : 1992 SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 12482-1:1995 Cranes Condition monitoring Part 1: General
PREN 14502-1 : DRAFT 2002 CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS
EN 1070 : 1998 SAFETY OF MACHINERY - TERMINOLOGY
IEC 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
EN 10113-3 : 1993 HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us