EN 13877-1:2013
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Concrete pavements - Part 1: Materials
09-30-2013
03-27-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for constituent materials
of concrete
5 Basic requirements for concrete
6 Basic requirements for other materials for
concrete pavements
Bibliography
This European Standard specifies requirements for:-the constituents (concrete and other materials) of concrete pavements;-the properties of fresh and hardened concrete.This European Standard is applicable to concrete pavements cast in situ. Concrete compacted by rollers is not covered by this European Standard.This European Standard covers concrete pavements for roads, motorways and airports, pedestrian footpaths, cycle tracks, storage areas, and in general all traffic-bearing structures.
| Committee |
CEN/TC 227
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| DS EN 13877-1 : 2013 | Identical |
| NBN EN 13877-1 : 2013 | Identical |
| NS EN 13877-1 : 2013 | Identical |
| NF EN 13877-1 : 2013 | Identical |
| NEN EN 13877-1 : 2013 | Identical |
| SN EN 13877-1 : 2016 | Identical |
| UNI EN 13877-1 : 2013 | Identical |
| DIN EN 13877-1:2013-06 | Identical |
| BS EN 13877-1:2013 | Identical |
| I.S. EN 13877-1:2013 | Identical |
| UNE-EN 13877-1:2013 | Identical |
| PN EN 13877-1 : 2013 | Identical |
| ONORM EN 13877-1 : 2013 | Identical |
| 15/30270279 DC : 0 | BS EN 16432-2 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SUBSYSTEMS AND COMPONENTS |
| DIN EN 16432-2:2015-04 (Draft) | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| I.S. EN 16432-2:2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| BS EN 13877-3:2004 | Concrete pavements Specifications for dowels to be used in concrete pavements |
| UNE-EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| I.S. EN 13877-2:2013 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| PD ISO/TS 13471-1:2017 | Acoustics. Temperature influence on tyre/road noise measurement Correction for temperature when testing with the CPX method |
| BS EN 16432-2:2017 | Railway applications. Ballastless track systems System design, subsystems and components |
| UNI EN 13877-2 : 2013 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| DIN EN 16432-2 E : 2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| BS EN 13877-2:2013 | Concrete pavements Functional requirements for concrete pavements |
| EN 16432-2:2017 | Railway applications - Ballastless track systems - Part 2: System design, subsystems and components |
| EN 13877-3:2004 | Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements |
| EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| ISO/TS 13471-1:2017 | Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method |
| DIN EN 13877-2:2013-06 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| DIN EN 13877-3:2005-02 | Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements |
| EN 12390-3:2009/AC:2011 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
| EN 12350-6:2009 | Testing fresh concrete - Part 6: Density |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
| EN 12350-3:2009 | Testing fresh concrete - Part 3: Vebe test |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 14188-3 : 2006 | JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
| CEN/TS 14754-1:2007 | Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| EN 12390-1:2012 | TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS |
| EN 13877-3:2004 | Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements |
| EN 12350-4:2009 | Testing fresh concrete - Part 4: Degree of compactability |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| EN 14188-1 : 2004 | JOINT FILLERS AND SEALANTS - PART 1: SPECIFICATIONS FOR HOT APPLIED SEALANTS |
| CEN/TS 12390-9:2016 | Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling |
| EN 206-1:2000/A2:2005 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| EN 12350-1:2009 | Testing fresh concrete - Part 1: Sampling |
| EN 14188-2 : 2004 | JOINT FILLERS AND SEALANTS - PART 2: SPECIFICATIONS FOR COLD APPLIED SEALANTS |
| EN 12390-6:2009 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
| EN 12350-7:2009 | Testing fresh concrete - Part 7: Air content - Pressure methods |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.