EN 14351-1:2006+A2:2016
Current
Current
The latest, up-to-date edition.
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
Published date
09-21-2016
Publisher
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics and special requirements
5 Classification and designation
6 Handling, installation, maintenance and care
7 Evaluation of conformity
8 Labelling and marking
Annex A (informative) - Interdependence between
characteristics and components
Annex B (normative) - Determination of sound insulation of windows
Annex C (informative) - Standards and draft standards on glass
Annex D (informative) - Examples of performance and
requirement profiles of a roof window
Annex E (normative) - Determination of characteristics
Annex F (informative) - Optional selection of representative
test specimens for windows
Annex G (informative) - Examples of test sequences
for optional combined determination of characteristics
for windows
Annex H (normative) - Selection, preparation, mounting
and fixing of test specimen for testing roof windows in
accordance with EN 13823 and EN ISO 11925-2 and field of
direct application
Annex I (normative) - Classification of air permeability
of products with described product characteristics
Annex J (normative) - Thermal transmittance for windows with bars
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Product Directive
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZC (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 2006/95/EC
Annex ZD (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 2006/42/EC
Bibliography
This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, that are applicable to windows (including roof windows, roof windows with external fire resistance and door height windows), external pedestrian doorsets (and their assemblies, including unframed glass doorsets, escape route doorsets) and screens.Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are covered by EN 16034.This European Standard applies to:a)fixed windows or fixed lights, manually or power operated windows and door height windows, and screens for installation in vertical wall apertures and roof windows for installation in roofs, complete with:1)related hardware, if any;2)weather stripping, if any;3)glazed apertures when intended to have glazed apertures;4)with or without incorporated shutters and/or shutter boxes and/or blinds;and manually or power operated windows, roof windows, door height windows and screens that are:5)fully or partially glazed including any non-transparent infill;6)fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding);b)manually operated external pedestrian doorsets with flush or panelled leaves, complete with:1)integral fanlights, if any;2)adjacent parts that are contained within a single frame for inclusion in a single aperture, if any.The windows covered by this standard are not assessed regarding their ability to release (to open).The products covered by this European Standard are not assessed for structural applications.This European Standard does not apply to:-rooflights according to EN 1873 and EN 14963;-curtain walling according to EN 13830;-industrial, commercial and garage doors and gates according to EN 13241;-internal pedestrian doorsets according to prEN 14351 2;-revolving doorsets;-power operated pedestrian doorsets according to EN 16361;-windows intended to be part of internal partition.
| DevelopmentNote |
2006 Edition Re-Issued in September 2016 & incorporates AMD 2 2016. (10/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN 14351-1:2016 | Identical |
| DIN EN 14351-1:2006-07 | Identical |
| NS EN 14351-1 : 2006 + A2 + NA 17 | Identical |
| I.S. EN 14351-1:2006 | Identical |
| UNE-EN 14351-1:2006 | Identical |
| NF EN 14351-1 : 2006 + A2 2016 | Identical |
| DIN EN 14351-1:2010-08 | Identical |
| BS EN 14351-1 : 2006 | Identical |
| UNI EN 14351-1 : 2010 | Identical |
| SN EN 14351-1 : 2006 + A2 2016 | Identical |
| I.S. EN 14351-1:2006+A2:2016 | Identical |
| NEN EN 14351-1 : 2006 + A2 2016 | Identical |
| DIN EN 14351-1:2016-12 | Identical |
| NBN EN 14351-1 : 2006 + A2 2016 | Identical |
| PN EN 14351-1 : 2006 + A2 2016 | Identical |
| UNE-EN 14351-1:2006+A2:2017 | Identical |
| UNE-EN 13126-5:2012 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows |
| PREN 17213 : DRAFT 2018 | WINDOWS AND DOORS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WINDOWS AND PEDESTRIAN DOORSETS |
| BS EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics |
| 12/30263172 DC : 0 | BS EN 1935 - BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS |
| 09/30202303 DC : 0 | BS EN 13420 - WINDOWS - BEHAVIOUR BETWEEN DIFFERENT CLIMATES - TEST METHOD |
| I.S. EN 16034:2014 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS |
| UNI EN 16034 : 2014 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS |
| PD CEN/TS 16459:2013 | External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187 |
| S.R. CEN/TS 16459:2013 | EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187 |
| EN ISO 52016-1:2017 | Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017) |
| DIN EN 13022-2:2014-08 | GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: ASSEMBLY RULES |
| UNE-EN 13022-2:2015 | Glass in building - Structural sealant glazing - Part 2: Assembly rules |
| BS EN 1873 : 2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| EN 13022-2:2014 | Glass in building - Structural sealant glazing - Part 2: Assembly rules |
| EN 13126-5:2011+A1:2014 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows |
| EN 12488:2016 | Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing |
| EN 50583-2:2016 | Photovoltaics in buildings - Part 2: BIPV systems |
| BS EN ISO 52016-1:2017 | Energy performance of buildings. Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads Calculation procedures |
| BS EN 50583-1:2016 | Photovoltaics in buildings BIPV modules |
| BS EN 50583-2:2016 | Photovoltaics in buildings BIPV systems |
| PREN 1935 : DRAFT 2012 | BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS |
| PREN 14351-2 : DRAFT 2014 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
| ISO 52016-1:2017 | Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 1: Calculation procedures |
| UNI EN 13126-5 : 2014 | A BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 5: DEVICES THAT RESTRICT THE OPENING OF WINDOWS AND DOOR HEIGHT WINDOWS |
| BS EN 16361 : 2013 | POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION |
| PREN 15269-1 : DRAFT 2017 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 12488:2016 | GLASS IN BUILDING - GLAZING RECOMMENDATIONS - ASSEMBLY PRINCIPLES FOR VERTICAL AND SLOPING GLAZING |
| I.S. EN 16361:2013 | POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION |
| I.S. EN 13022-2:2014 | GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: ASSEMBLY RULES |
| I.S. EN 1873:2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| DIN EN 1873:2016-07 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNI EN 16005 : 2012 | POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS |
| PREN 1125 : DRAFT 2016 | BUILD HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 11/30253413 DC : 0 | BS EN 16361 - POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOOR SETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION WITHOUT RESISTANCE TO FIRE AND SMOKE LEAKAGE CHARACTERISTICS |
| 17/30347436 DC : 0 | BS EN 15269-1 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS |
| DIN EN 16005:2013-01 | Power operated pedestrian doorsets - Safety in use - Requirements and test methods |
| UNE-EN 50583-2:2016 | Photovoltaics in buildings - Part 2: BIPV systems |
| 12/30266506 DC : 0 | BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS |
| PREN 179 : DRAFT 2016 | BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 16034:2015 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
| UNI EN 13022-2 : 2014 | GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: ASSEMBLY RULES |
| UNI CEN/TS 16459 : 2014 | EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187 |
| DIN EN 16034:2014-12 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS |
| BS EN 12488:2016 | Glass in building. Glazing recommendations. Assembly principles for vertical and sloping glazing |
| DIN 4109-35:2016-07 | SOUND INSULATION IN BUILDINGS - PART 35: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - ELEMENTS, WINDOWS, DOORS, CURTAIN WALLING |
| I.S. EN 16005:2012 | POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS |
| PREN 50583 : DRAFT 2012 | PHOTOVOLTAICS IN BUILDINGS |
| 18/30367193 DC : 0 | BS EN 17213 - WINDOWS AND DOORS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WINDOWS AND PEDESTRIAN DOORSETS |
| I.S. EN 50583-1:2016 | PHOTOVOLTAICS IN BUILDINGS - PART 1: BIPV MODULES |
| PREN 17146 : DRAFT 2017 | DETERMINATION OF THE STRENGTH OF INFILL SUPPORTS - TEST METHOD AND REQUIREMENTS |
| PREN 16759 : DRAFT 2014 | STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS) |
| UNE-EN 16005:2013 | Power operated pedestrian doorsets - Safety in use - Requirements and test methods |
| CEN/TS 16459:2013 | External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 |
| UNE-EN 1873:2015 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
| EN 16005:2012/AC:2015 | POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS |
| EN 1873:2014+A1:2016 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| EN 16361:2013+A1:2016 | Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation |
| UNE-EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| DIN EN 13126-5:2015-01 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows; German version EN 13126-5:2011+A1:2014 |
| BS EN 13126-5 : 2011 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 5: DEVICES THAT RESTRICT THE OPENING OF WINDOWS AND DOOR HEIGHT WINDOWS |
| I.S. EN 13126-5:2011 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 5: DEVICES THAT RESTRICT THE OPENING OF WINDOWS AND DOOR HEIGHT WINDOWS |
| I.S. EN 50583-2:2016 | PHOTOVOLTAICS IN BUILDINGS - PART 2: BIPV SYSTEMS |
| 17/30360046 DC : 0 | BS EN 17146 - DETERMINATION OF THE STRENGTH OF INFILL SUPPORTS - TEST METHOD AND REQUIREMENTS |
| 14/30297827 DC : 0 | BS EN 14351-2 - WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
| BS EN 16005:2012 | Power operated pedestrian doorsets. Safety in use. Requirements and test methods |
| 16/30343249 DC : 0 | BS EN 179 - BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNI EN 16361 : 2013 | POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION WITHOUT RESISTANCE TO FIRE AND SMOKE LEAKAGE CHARACTERISTICS |
| 14/30300917 DC : 0 | BS EN 16759 - STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS) |
| I.S. EN ISO 52016-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - ENERGY NEEDS FOR HEATING AND COOLING, INTERNAL TEMPERATURES AND SENSIBLE AND LATENT HEAT LOADS - PART 1: CALCULATION PROCEDURES (ISO 52016-1:2017) |
| 16/30343246 DC : 0 | BS EN 1125 - BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 13022-2:2014 | Glass in building. Structural sealant glazing Assembly rules |
| EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| UNE-EN 16361:2014 | Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics |
| ENV 1630:1999 | Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts |
| EN 14321-2:2005 | Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| EN 12210:2016 | WINDOWS AND DOORS - RESISTANCE TO WIND LOAD - CLASSIFICATION |
| EN 950:1999 | Door leaves - Determination of the resistance to hard body impact |
| EN 60335-2-103:2015 | Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows |
| EN 16361:2013+A1:2016 | Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 1935:2002/AC:2003 | BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS |
| EN 13124-2:2004 | Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test |
| ENV 1187:2002/A1:2005 | TEST METHODS FOR EXTERNAL FIRE EXPOSURE TO ROOFS |
| EN 1125:2008 | Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods |
| EN 13363-2:2005/AC:2006 | SOLAR PROTECTION DEVICES COMBINED WITH GLAZING - CALCULATION OF TOTAL SOLAR ENERGY TRANSMITTANCE AND LIGHT TRANSMITTANCE - PART 2: DETAILED CALCULATION METHOD |
| EN 673:2011 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| EN 1096-4:2004 | Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard |
| EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| EN 14609:2004 | Windows - Determination of the resistance to static torsion |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| EN 1026:2016 | Windows and doors - Air permeability - Test method |
| EN 13123-2:2004 | Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test |
| ENV 13420:2000 | Windows - Behaviour between different climates - Test method |
| EN 1523:1998 | Windows, doors, shutters and blinds - Bullet resistance - Test method |
| ENV 1629:1999 | Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading |
| EN 1027:2016 | WINDOWS AND DOORS - WATER TIGHTNESS - TEST METHOD |
| EN ISO 12543-2:2011 | Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) |
| EN 12400:2002 | Windows and pedestrian doors - Mechanical durability - Requirements and classification |
| EN 14608:2004 | Windows - Determination of the resistance to racking |
| IEC 61000-6-1 : 3.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| EN 13241:2003+A2:2016 | Industrial, commercial, garage doors and gates - Product standard, performance characteristics |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| EN 13115:2001 | Windows - Classification of mechanical properties - Racking, torsion and operating forces |
| EN 1748-1-2:2004 | Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard |
| ISO 10077-2:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames |
| EN 12207:2016 | Windows and doors - Air permeability - Classification |
| EN 12211:2016 | Windows and doors - Resistance to wind load - Test method |
| EN 12208:1999 | Windows and doors - Watertightness - Classification |
| EN 14179-2:2005 | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| ISO 12543-2:2011 | Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass |
| EN 948:1999 | Hinged or pivoted doors - Determination of the resistance to static torsion |
| EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| EN 12519:2004 | Windows and pedestrian doors - Terminology |
| EN ISO 10077-2:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017) |
| EN 1192:1999 | Doors - Classification of strength requirements |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| EN 1121:2000 | Doors - Behaviour between two different climates - Test method |
| EN 13123-1:2001 | Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1: Shock tube |
| ISO 12567-1:2010 | Thermal performance of windows and doors Determination of thermal transmittance by the hot-box method Part 1: Complete windows and doors |
| EN 572-9:2004 | Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard |
| EN 1863-2:2004 | Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
| EN 12046-2:2000 | Operating forces - Test method - Part 2: Doors |
| EN 12337-2:2004 | Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
| EN ISO 140-3:1995/A1:2004 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS |
| EN 947:1998 | Hinged or pivoted doors - Determination of the resistance to vertical load |
| PREN 13637 : DRAFT 2014 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 12567-2:2005 | Thermal performance of windows and doors Determination of thermal transmittance by hot box method Part 2: Roof windows and other projecting windows |
| EN 13141-1:2004 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices |
| EN 12150-2:2004 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| EN 14178-2:2004 | Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard |
| EN 13124-1:2001 | Windows, doors and shutters - Explosion resistance - Test method - Part 1: Shock tube |
| EN 1279-5:2005+A2:2010 | Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
| EN 13830:2015 | Curtain walling - Product standard |
| EN 13363-1:2003+A1:2007/AC:2008 | SOLAR PROTECTION DEVICES COMBINED WITH GLAZING - CALCULATION OF SOLAR AND LIGHT TRANSMITTANCE - PART 1: SIMPLIFIED METHOD |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| EN 1748-2-2:2004 | Glass in building - Special basic products - Part 2-2: Glass ceramics - Evaluation of conformity/Product standard |
| EN 13049:2003 | Windows - Soft and heavy body impact - Test method, safety requirements and classification |
| EN 12354-3:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound |
| EN 12217:2015 | Doors - Operating forces - Requirements and classification |
| ISO 9001:2015 | Quality management systems — Requirements |
| ENV 1628:1999 | Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance under static loading |
| EN 12219:1999 | Doors - Climatic influences - Requirements and classification |
| EN 12608:2003 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods |
| ENV 1627:1999 | Windows, doors, shutters - Burglar resistance - Requirements and classification |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| EN 1522:1998 | Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification |
| EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
| EN 949:1998 | Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors |
| EN 13024-2:2004 | Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard |
| PREN 14351-2 : DRAFT 2014 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
| EN 12046-1:2003 | Operating forces - Test method - Part 1: Windows |
| ISO 10077-1:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General |
| EN 1873:2014+A1:2016 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| EN 1191:2012 | Windows and doors - Resistance to repeated opening and closing - Test method |
| EN ISO 12567-2:2005 | Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005) |
| EN 14963:2006 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
| BS 4873:2016 | Aluminium alloy windows and doorsets. Specification |
| EN ISO 10077-1:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02) |
| EN 14600:2005 | Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification |
| EN 179:2008 | Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods |
| IEC 60335-2-103:2015+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.