EN 14961-4:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use
05-01-2014
06-15-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Specification of wood chips for non-industrial use
Annex A (informative) - General guidelines for bulk
density of wood chips for non-industrial use
Annex B (informative) - A-deviations
Bibliography
This European standard determines the fuel quality classes and specifications for non-industrial wood chips. This European standard covers only wood chip produced from the following raw materials (see EN 14961-1:2010, Table 1):-1.1 Forest, plantation and other virgin wood;-1.2 By-products and residues from wood processing industry;-1.3 Used wood.NOTEFor the avoidance of doubt, demolition wood is not included in the scope of this European Standard. Demolition wood is “used wood arising from demolition of buildings or civil engineering installations” (EN 14588:2010, 4.52).
| Committee |
CEN/TC 335
|
| DevelopmentNote |
Supersedes CEN/TS 14961. (06/2011) To be read in conjunction with EN 14961-1. (07/2011) Supersedes PREN 14961-4. (08/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN 14961-4:2011 | Identical |
| I.S. EN 14961-4:2011 | Identical |
| NF EN 14961-4 : 2011 | Identical |
| NS EN 14961-4 : 2011 | Identical |
| PN EN 14961-4 : 2011 | Identical |
| NEN EN 14961-4 : 2011 | Identical |
| UNE-EN 14961-4:2012 | Identical |
| SN EN 14961-4 : 2011 | Identical |
| NBN EN 14961-4 : 2011 | Identical |
| DIN EN 14961-4:2011-09 | Identical |
| UNI EN 14961-4 : 2011 | Identical |
| BS EN 15234-4:2012 | Solid biofuels. Fuel quality assurance Wood chips for non-industrial use |
| DIN EN 15234-4:2012-04 | Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use |
| UNE-EN 15234-4:2012 | Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use |
| BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
| EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| UNI EN 15234-4 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| UNI EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| NF EN 15234-4 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| BS EN 15234-1:2011 | Solid biofuels. Fuel quality assurance General requirements |
| I.S. EN 15234-4:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| EN 15234-4:2012 | Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use |
| I.S. EN 15234-1:2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| EN 15103:2009 | Solid biofuels - Determination of bulk density |
| EN 14588:2010 | Solid biofuels - Terminology, definitions and descriptions |
| EN 14961-1:2010 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements |
| PREN 15234-4 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| EN 14918:2009 | Solid biofuels - Determination of calorific value |
| EN 14774-2:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| EN 15297:2011 | Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| EN 15149-2:2010 | Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
| EN 15289:2011 | Solid biofuels - Determination of total content of sulfur and chlorine |
| EN 15105:2011 | Solid biofuels - Determination of the water soluble chloride, sodium and potassium content |
| EN 15104:2011 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods |
| PREN 14778 : DRAFT 2010 | SOLID BIOFUELS - SAMPLING |
| EN 14775:2009 | Solid biofuels - Determination of ash content |
| PREN 14780 : DRAFT 2010 | SOLID BIOFUELS - SAMPLE PREPARATION |
| EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| EN 14774-1:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method |
| EN 15149-1:2010 | Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.