• There are no items in your cart

EN 14961-5:2011

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
Superseded date

05-01-2014

Published date

03-09-2011

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Specification of firewood for non-industrial use
Annex A (informative) - Comparison of moisture content as
        received and dry basis
Annex B (informative) - Comparison of different cubic meters
Bibliography

This European standard determines the fuel quality classes and specifications for firewood for non-industrial use. This European standard covers only firewood produced from the following raw material (see EN 14961-1:2010, Table 1):-1.1.1 Whole trees without roots;-1.2.1 Chemically untreated wood residues;-1.1.3 Stem wood;-1.1.4 Logging residues (thick branches, tops, etc.).NOTEFor the avoidance of doubt, demolition wood is not included in the scope of this European Standard. Demolition wood is “used wood arising from demolition of buildings or civil engineering installations” (EN 14588:2010, 4.52).

Committee
CEN/TC 335
DevelopmentNote
Supersedes CEN/TS 14961. (03/2011) Supersedes PREN 14961-5. (08/2011)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

BS EN 15234-5:2012 Solid biofuels. Fuel quality assurance Firewood for non-industrial use
UNI EN 15234-1 : 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS
BS EN 303-5:2012 Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
EN 15234-1:2011 Solid biofuels - Fuel quality assurance - Part 1: General requirements
DIN EN 15234-1:2011-05 Solid biofuels - Fuel quality assurance - Part 1: General requirements
11/30244612 DC : 0 BS EN 15234-5 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
DIN EN 15234-5:2012-04 Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
I.S. EN 15234-5:2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
DIN EN 303-5:2012-10 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
I.S. EN 303-5:2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
UNI EN 303-5 : 2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
BS EN 15234-1:2011 Solid biofuels. Fuel quality assurance General requirements
UNI EN 15234-5 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
EN 15234-5:2012 Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
UNE-EN 15234-5:2012 Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
NF EN 15234-5 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
PREN 15234-5 : DRAFT 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
UNE-EN 15234-1:2011 Solid biofuels - Fuel quality assurance - Part 1: General requirements
I.S. EN 15234-1:2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS
UNE-EN 303-5:2013 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

EN 13229:2001/A2:2004/AC:2007 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
EN 14588:2010 Solid biofuels - Terminology, definitions and descriptions
EN 14961-1:2010 Solid biofuels - Fuel specifications and classes - Part 1: General requirements
EN 13240:2001/A2:2004/AC:2007 ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
EN 14774-2:2009 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
EN 13556:2003 Round and sawn timber - Nomenclature of timbers used in Europe
EN 15821:2010 Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods
EN 15250:2007 Slow heat release appliances fired by solid fuel - Requirements and test methods
PREN 15234-5 : DRAFT 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
EN 15234-1:2011 Solid biofuels - Fuel quality assurance - Part 1: General requirements
EN 14774-1:2009 Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
EN 12809:2001/A1:2004/AC:2007 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
EN 12815:2001/A1:2004/AC:2007 RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.