• There are no items in your cart

EN 15167-1:2006

Current
Current

The latest, up-to-date edition.

Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
Published date

08-02-2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Constituents
5 Specifications
  5.1 General
  5.2 Chemical requirements
  5.3 Physical requirements
      5.3.1 Fineness
      5.3.2 Requirements when combined with the test cement
  5.4 Other requirement
      5.4.1 Durability requirements
      5.4.2 Release of dangerous substances and emission of
            radioactivity
  5.5 Information to be supplied upon request
6 Packaging and labelling
7 Sampling
8 Evaluation of conformity
  8.1 General requirements
  8.2 Statistical conformity criteria
      8.2.1 General
      8.2.2 Inspection by variables
      8.2.3 Inspection by attributes
  8.3 Single result conformity criteria
Annex A (normative) Method of determining the moisture content
                    of ground granulated blastfurnace slag
  A.1 Principle
  A.2 Apparatus
      A.2.1 Balance, capable of weighing to an accuracy of 0,001 g
      A.2.2 Shallow container of about 20 g capacity
      A.2.3 Electric oven with natural ventilation controlled at
            (110 +/- 5) degree C
      A.2.4 Desiccator containing dried magnesium perchlorate
  A.3 Procedure
  A.4 Calculation
  A.5 Report
Annex ZA (informative) Clauses of this European Standard addressing
                       essential requirements or other provisions of
                       EU Directives
Bibliography

This European Standard specifies requirements for the chemical and physical properties as well as quality control procedures for ground granulated blastfurnace slag for use as a type II addition in the production of concrete, including in particular cast-in-situ or prefabricated structural concrete conforming to EN 206-1. Ground granulated blastfurnace slag conforming to this European Standard may also be used in mortars and grouts.Ground granulated blastfurnace slag containing any added materials other than grinding aids, is not within the scope of this European Standard. It is also not within the scope of this European Standard to specify provisions governing the practical application of ground granulated blastfurnace slag in the production of concrete, mortar or grout, i.e. requirements concerning composition, mixing, placing, curing etc. As regards such provisions, reference should be made to other European or national standards, such as EN 206-1.

Committee
CEN/TC 104
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

BS EN 14227-15:2015 Hydraulically bound mixtures. Specifications Hydraulically stabilized soils
05/30130595 DC : DRAFT MAR 2005 BS EN 15167-2 - GROUND GRANULATED BLASTFURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION
BS EN 206 : 2013 CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
S.R. CEN/TR 16563:2013 PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE
CEN/TR 16563:2013 Principles of the equivalent durability procedure
PD CEN/TR 16349:2012 Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete
DIN EN 206:2014-07 CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
S.R. CEN/TR 16349:2012 FRAMEWORK FOR A SPECIFICATION ON THE AVOIDANCE OF A DAMAGING ALKALI-SILICA REACTION (ASR) IN CONCRETE
11/30240498 DC : 0 BS EN 14227-2 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND MIXTURES
15/30328074 DC : 2015-12 BS EN 16907-4 - EARTHWORKS - PART 4: SOIL TREATMENT WITH LIME AND/OR HYDRAULIC BINDERS
I.S. EN 14227-15:2015 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS
DIN EN 14227-2:2013-08 Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures; German version EN 14227-2:2013
I.S. EN 14227-2:2013 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND MIXTURES
UNE-EN 14227-15:2017 Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
UNI EN 15167-2 : 2006 GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION
UNI EN 14227-2 : 2013 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND GRANULAR MIXTURES
UNI CEN/TR 16563 : 2013 PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE
EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity
DIN EN 14227-15 E : 2016 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS
14/30294810 DC : 0 BS EN 14227-15 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS
12/30257889 DC : 0 BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
DIN EN 14227-15:2016-02 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS
PD CEN/TR 16563:2013 Principles of the equivalent durability procedure
UNI CEN/TR 16349 : 2013 FRAMEWORK FOR A SPECIFICATION ON THE AVOIDANCE OF A DAMAGING ALKALI-SILICA REACTION (ASR) IN CONCRETE
BS EN 14227-2:2013 Hydraulically bound mixtures. Specifications Slag bound granular mixtures
UNE-EN 14227-2:2014 Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures
EN 14227-15 : 2015 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS
EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
EN 14227-2:2013 Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures
BS EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation
CEN/TR 16349:2012 Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
EN 196-7:2007 Methods of testing cement - Part 7: Methods of taking and preparing samples of cement
EN 196-2:2013 Method of testing cement - Part 2: Chemical analysis of cement
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
EN 196-1:2016 Methods of testing cement - Part 1: Determination of strength
EN 206-1:2000/A2:2005 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
EN 196-3:2016 Methods of testing cement - Part 3: Determination of setting times and soundness

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.