• There are no items in your cart

EN 15408:2011

Current
Current

The latest, up-to-date edition.

Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
Published date

03-09-2011

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety remarks
5 Principle
6 Apparatus
7 Reagents
8 Interferences and sources of error
9 Procedure
10 Calculation and evaluation
11 Quality control
12 Performance characteristics
13 Test report
Annex A (normative) - Guidelines - Characteristics
        of the laboratory sample for chemical analysis
        of SRF
Annex B (informative) - Data on performance
        characteristics
Annex C (informative) - Major results of ruggedness
        testing
Bibliography

This European Standard specifies the determination of S, Cl, F and Br in solid recovered fuels of various origin and composition after combustion in oxygen atmosphere. This method is applicable for concentrations over 0,025 g/kg, depending on the element and on the determination technique. In the case of fluorine this method is applicable for concentration over 0,015 g/kg.Insoluble halides and sulphate present in the original sample or produced during the combustion step are not completely determined by these methods.This European Standard provides recommendations concerning standardised methods for determination of halides and sulphate in the solution obtained after combustion.

Committee
CEN/TC 343
DevelopmentNote
Supersedes CEN/TS 15408. (03/2011) Supersedes PREN 15408. (08/2011)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
NF EN 15408 : 2011 Identical
UNI EN 15408 : 2011 Identical
NBN EN 15408 : 2011 Identical
I.S. EN 15408:2011 Identical
SN EN 15408 : 2011 Identical
UNE-EN 15408:2011 Identical
DIN EN 15408:2011-05 Identical
NEN EN 15408 : 2011 Identical
PN EN 15408 : 2011 Identical
NS EN 15408 : 2011 Identical
BS EN 15408:2011 Identical

16/30342057 DC : 0 BS EN 17033 - PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS
DIN EN 15411:2011-11 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
I.S. EN 15413:2011 SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE TEST SAMPLE FROM THE LABORATORY SAMPLE
UNI EN 15442 : 2011 SOLID RECOVERED FUELS - METHODS FOR SAMPLING
NF EN 15359 : 2011 SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES
DIN EN 15359 E : 2012 SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES
I.S. EN 15359:2011 SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES
EN 15410:2011 Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
DIN EN 15410:2011-11 Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
BS EN 15411:2011 Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
I.S. EN 15442:2011 SOLID RECOVERED FUELS - METHODS FOR SAMPLING
BS EN 15410:2011 Solid recovered fuels. Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
UNI EN 15400 : 2011 SOLID RECOVERED FUELS - DETERMINATION OF CALORIFIC VALUE
UNE-EN 15400:2011 Solid recovered fuels - Determination of calorific value
XP T47 765 : 2011 XP END OF LIFE TYRES (ELT) - CHARACTERISATION OF GRANULATES FROM GRANULATION PROCESSES - GUIDANCE FOR A TESTING CAMPAIGN
EN 15407:2011 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
DIN EN 15442:2011-05 Solid recovered fuels - Methods for sampling; German version EN 15442:2011
UNI EN 15413 : 2011 SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE TEST SAMPLE FROM THE LABORATORY SAMPLE
BS EN 15442:2011 Solid recovered fuels. Methods for sampling
DIN EN 15359:2012-01 Solid recovered fuels - Specifications and classes
BS EN 15400:2011 Solid recovered fuels. Determination of calorific value
EN 15400:2011 Solid recovered fuels - Determination of calorific value
UNI EN 15411 : 2011 SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN)
EN 15442:2011 Solid recovered fuels - Methods for sampling
UNI EN 15359 : 2011 SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES
DIN EN 15400:2011-05 Solid recovered fuels - Determination of calorific value
UNI EN 15410 : 2011 SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI)
UNE-EN 15359:2012 Solid recovered fuels - Specifications and classes
BS EN 15407:2011 Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
DIN EN 15407:2011-05 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
BS EN 15359:2011 Solid recovered fuels. Specifications and classes
I.S. EN 15410:2011 SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI)
UNE-EN 15407:2011 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
I.S. EN 15411:2011 SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN)
I.S. EN 15407:2011 SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF CARBON (C), HYDROGEN (H) AND NITROGEN (N) CONTENT
UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
I.S. EN 15400:2011 SOLID RECOVERED FUELS - DETERMINATION OF CALORIFIC VALUE
UNE-EN 15442:2012 Solid recovered fuels - Methods for sampling
UNE-EN 15410:2012 Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
UNI EN 15407 : 2011 SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF CARBON (C), HYDROGEN (H) AND NITROGEN (N) CONTENT
UNE-EN 15411:2012 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
EN 15359:2011 Solid recovered fuels - Specifications and classes

EN 15357:2011 Solid recovered fuels - Terminology, definitions and descriptions
EN 15407:2011 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
CEN/TS 15412:2010 Solid recovered fuels - Methods for the determination of metallic aluminium
EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
PREN 15413 : DRAFT 2010 SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE TEST SAMPLE FROM THE LABORATORY SAMPLE
PREN 15410 : DRAFT 2010 SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI)
EN 15442:2011 Solid recovered fuels - Methods for sampling
EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
ISO 9297:1989 Water quality Determination of chloride Silver nitrate titration with chromate indicator (Mohr's method)
ISO 10304-1:2007 Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 10359-1:1992 Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water
PREN 15411 : DRAFT 2010 SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN)
ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)
ISO 17294-2:2016 Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes
EN ISO 17294-2:2016 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.