• There are no items in your cart

EN 15955-2:2013

Current
Current

The latest, up-to-date edition.

Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
Published date

04-24-2013

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 General safety requirements and/or measures
6 Additional safety requirements or measures for
  specific machine functions
7 Verification of the conformity to the requirements
  and/or particular safety measures
8 Information for use
Annex A (normative) - List of significant hazards
Annex B (normative) - Check list for conformity
Annex C (normative) - Noise test code (grade of accuracy 2)
Annex D (informative) - Structure of European standards
        for track construction and maintenance machines
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC
Bibliography

This European Standard specifies the technical requirements to deal with the significant hazards, hazardous situations and events, common to demountable machines, as defined in EN 15955-1:2013, intended for construction, maintenance inspection of the railway infrastructure, shunting and emergency rescue vehicles.This European Standard specifies the technical requirements to deal with the common hazards during transport, assembly and installation, commissioning, running on track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer; see Clause 4. NOTESpecific measures for exceptional circumstances are not dealt with in this European Standard. They can be the subject of negotiation between manufacturer and the machine operator.The common hazards dealt with include the general hazards presented by the machines, as well as the hazards presented by the following specific machine functions:-excavation;-ballast tamping, ballast cleaning, ballast regulating, ballast consolidating;-track renewal;-rail maintenance;-craning;-catenary renewal / maintenance;-maintenance of the components of the infrastructure;-inspection and measurement of the components of the infrastructure;-tunnel inspection / ventilation;-shunting;-emergency rescue and recovery;during commissioning, use, maintenance and servicing.This European Standard applies to self-propelled machines that are not intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards; see Annex D.It is assumed that a finished standard automotive chassis used as a host for a demountable machine will offer an acceptable safety level for its designed functions before conversion. This specific aspect is not dealt with in this European Standard.This European Standard does not deal with:a)requirements with regard to the quality of work and the performance of the machine;b)machines that utilise the catenary for traction purposes;c)specific requirements established by a railway infrastructure manager;d)negotiations between the manufacturer and the machine operator for additional or alternative requirements;e)hazards due to air pressure caused by the passing of high-speed trains at more than 200 km/h;f)requirements which could be necessary in case of use in extreme conditions, such as:1)extreme ambient temperatures (below − 20 °C or above + 40 °C);2)highly corrosive or contaminating environment, e.g. due to the presence of chemicals;3)potentially explosive atmospheres.This European Standard applies to all machines that are ordered one year after the publication date by CEN of this standard.

Committee
CEN/TC 256
DevelopmentNote
Supersedes PREN 15955-2. (05/2013)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

BS EN 15954-2:2013 Railway applications. Track. Trailers and associated equipment General safety requirements
14/30258500 DC : 0 BS EN 14033-2 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
DIN EN 16704-1:2017-11 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
DIN EN 15954-1:2014-06 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
15/30279805 DC : 0 BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
15/30304275 DC : 0 BS EN 15746-4 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 4: TECHNICAL REQUIREMENTS FOR RUNNING, TRAVELLING AND WORKING ON URBAN RAIL
UNE-EN 15954-1:2014 Railway applications - Track - Trailers and associated equipment - Part 1: Technical requirements for running and working
DIN EN 16704-1:2017-11 Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites
DIN EN 14033-2:2017-10 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
DIN EN 14033-1:2014-08 (Draft) RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING
DIN EN 14033-2:2014-08 (Draft) RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
BS EN 14033-3 : 2009 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
14/30293535 DC : 0 BS EN 16704-1 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
15/30304272 DC : DRAFT DEC 2015 BS EN 15746-3 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 3: TECHNICAL REQUIREMENTS FOR RUNNING
PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS EN 14033-2:2017 Railway applications. Track. Railbound construction and maintenance machines Technical requirements for travelling and working
PREN 14033-4 : DRAFT 2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 4: TECHNICAL REQUIREMENTS FOR RUNNING, TRAVELLING AND WORKING ON URBAN RAIL
I.S. EN 14033-3:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
UNE-EN 16704-1:2017 Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites
BS EN 15954-1:2013 Railway applications. Track. Trailers and associated equipment Technical requirements for running and working
BS EN 14033-1:2017 Railway applications. Track. Railbound construction and maintenance machines Technical requirements for running
BS EN 16704-1:2016 Railway applications. Track. Safety protection on the track during work Railway risks and common principles for protection of fixed and mobile work sites
I.S. EN 15955-1:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
I.S. EN 15954-2:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 16704-1:2016 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
UNE-EN 15954-2:2014 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
UNI EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
UNI EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 15954-1 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
DIN EN 16704-1:2014-04 (Draft) RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
DIN EN 14033-3:2014-08 (Draft) RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
I.S. EN 14033-2:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
EN 16704-1:2016 Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites
UNE-EN 15955-1:2014 Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working
EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
EN 14033-2:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working
EN 14033-1:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running
EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 14033-3:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
DIN EN 15955-1:2013-08 Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working
BS EN 15955-1:2013 Railway applications. Track. Demountable machines and associated equipment Technical requirements for running and working
14/30258503 DC : 0 BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
DIN EN 15954-2:2013-11 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
15/30279801 DC : 0 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
17/30326148 DC : 0 BS EN 14033-4 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 4: TECHNICAL REQUIREMENTS FOR RUNNING, TRAVELLING AND WORKING ON URBAN RAIL
I.S. EN 14033-1:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING
DIN EN 14033-1:2017-10 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING

EN 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
EN 13977:2011 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
UNI CEI 11170-1 : 2005 RAILWAY AND TRAMWAY VEHICLES - GUIDELINES FOR FIRE PROTECTION OF RAILWAY, TRAMWAY AND GUIDED PATH VEHICLES - GENERAL PRINCIPLES
EN 12096:1997 Mechanical vibration - Declaration and verification of vibration emission values
EN ISO 2860:2008 Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)
DIN 5510-2:2009-05 PREVENTIVE FIRE PROTECTION IN RAILWAY VEHICLES - PART 2: FIRE BEHAVIOUR AND FIRE SIDE EFFECTS OF MATERIALS AND PARTS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 13557:2003+A2:2008 Cranes - Controls and control stations
EN 280:2013+A1:2015 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
ISO 12001:1996 Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
ISO 10263-5:2009 Earth-moving machinery Operator enclosure environment Part 5: Windscreen defrosting system test method
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 4310:2009 Cranes — Test code and procedures
ISO 7096:2000 Earth-moving machinery Laboratory evaluation of operator seat vibration
ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
NFF 16 101 : 1988 ROLLING STOCK - FIRE BEHAVIOUR - MATERIALS CHOOSING
BS 7262:1990 Specification for automatic safe load indicators
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
ISO 12508:1994 Earth-moving machinery Operator station and maintenance areas Bluntness of edges
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
IEC TS 61000-1-2:2008 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 13135-2:2004+A1:2010 Cranes - Equipment - Part 2: Non-electrotechnical equipment
EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection
NFF 16 102 : 1992 RAILWAY ROLLING STOCK - FIRE BEHAVIOUR - MATERIALS CHOOSING, APPLICATION FOR ELECTRIC EQUIPMENTS
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
CEN/TR 15172-1:2005 Whole-body vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery
EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
EN 50153 : 2014 AMD 1 2017 RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
CR 1030-1 : 1995 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY
SANS 20043 : 2ED 2005 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SAFETY GLAZING MATERIALS AND THEIR INSTALLATION ON VEHICLES
ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN ISO 5353:1998 Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995)
ISO 10263-3:2009 Earth-moving machinery Operator enclosure environment Part 3: Pressurization test method
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
EN ISO 12001:2009 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
EN 13135-1:2003+A1:2010 Cranes - Equipment - Part 1: Electrotechnical equipment
EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
ISO 2860:1992 Earth-moving machinery — Minimum access dimensions
ISO 5006:2017 Earth-moving machinery — Operator's field of view — Test method and performance criteria
EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 4305:2014 Mobile cranes Determination of stability
EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
EN 15746-1:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data
ISO 6405-1:2017 Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols
EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
UNI CEI 11170-3 : 2005 RAILWAY AND TRAMWAY VEHICLES - GUIDELINES FOR FIRE PROTECTION OF RAILWAY, TRAMWAY AND GUIDED PATH VEHICLES - EVALUATION OF FIRE BEHAVIOUR OF MATERIALS - LIMITS OF ACCEPTANCE
ISO 10263-2:2009 Earth-moving machinery Operator enclosure environment Part 2: Air filter element test method
EN 14033-2:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working
EN 14033-1:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running
IEC 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN 28662-1:1992 HAND HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - GENERAL
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
EN ISO 6682:2008 Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
ISO 10567:2007 Earth-moving machinery Hydraulic excavators Lift capacity
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
ISO 8662-1:1988 Hand-held portable power tools Measurement of vibrations at the handle Part 1: General
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN ISO 2867:2011 Earth-moving machinery - Access systems (ISO 2867:2011)
EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
ISO 16001:2008 Earth-moving machinery Hazard detection systems and visual aids Performance requirements and tests
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 2867:2011 Earth-moving machinery Access systems
EN 13000:2010+A1:2014 Cranes - Mobile cranes
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN 15954-1 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN ISO 7096:2008/AC:2009 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 14033-3:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.